Hi,
On Mon, 14 Nov 2022 at 06:50, Tasos Terzidis <terzana...@gmail.com> wrote:
>
> Hello,
>
> I have a very peculiar problem.
>
> I have a very simple boot.scr script so that u-boot can load it and run it.
>
> My set up is a Raspberry 3 B (32 bit)
>
> Sript is
>
> Fatload mmc 0:1 ${kernel_addr_r} kernel7.img
>
> Bootz ${kernel_addr_r} - ${fdt_addr}
>
>
>
> When u-boot stops autocounting, finds the script loads it and the error
> message is
>
> -à ‘ailed to find kernel7.img ß--
>
>
>
> Instead of F for word Failed, prints ‘ailed.
>
>
>
> If I stop auto counting and enter the commands of script by hand it runs
> and loads kernel as expected
>
>
>
> As a matter of fact whatever command I add to the script gives an error
>
> Example : if I add printenv the error is “can not find command”
>
>
>
> I can not understand what the problem is.
>
>
>
> Has anyone encountered such a problem ??
Can you post the whole console output so we can see version, etc.?
I cannot immediately even find that 'Failed to find %s' string in U-Boot.
Regards,
Simon
