[PATCH 1/3] ram: ast2600: Fix incorrect statement of the register polling

[Dylan Hung]

The condition "~data" in the if-statement is a typo.  The original
intention is to poll if SDRAM_PHYCTRL0_INIT bit equals to 0. So use
"data == 0" for instead.

Besides, the bit[1] of "phy_status" register is hardwired to
SDRAM_PHYCTRL0_INIT (with inverse logic). Since SDRAM_PHYCTRL0_INIT has
already done, remove the unnecessary checking of phy_status[1].

Fixes: fde93143469f ("ram: aspeed: Add AST2600 DRAM control support")

Signed-off-by: Dylan Hung <dylan_h...@aspeedtech.com>
---
 drivers/ram/aspeed/sdram_ast2600.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/ram/aspeed/sdram_ast2600.c 
b/drivers/ram/aspeed/sdram_ast2600.c
index 9ad398d24155..b09232a30413 100644
--- a/drivers/ram/aspeed/sdram_ast2600.c
+++ b/drivers/ram/aspeed/sdram_ast2600.c
@@ -449,7 +449,7 @@ static void ast2600_sdramphy_kick_training(struct dram_info 
*info)
 
        while (1) {
                data = readl(&regs->phy_ctrl[0]) & SDRAM_PHYCTRL0_INIT;
-               if (~data)
+               if (data == 0)
                        break;
        }
 }
@@ -984,11 +984,6 @@ static int ast2600_sdrammc_probe(struct udevice *dev)
 L_ast2600_sdramphy_train:
        ast2600_sdrammc_init_ddr4(priv);
 
-       /* make sure DDR-PHY is ready before access */
-       do {
-               reg = readl(priv->phy_status) & BIT(1);
-       } while (reg == 0);
-
        if (ast2600_sdramphy_check_status(priv) != 0) {
                printf("DDR4 PHY training fail, retrain\n");
                goto L_ast2600_sdramphy_train;
-- 
2.25.1