On 01/10/2011 02:44 PM, Tiago Maluta wrote: > I'd like to adapt u-boot to work with NFC v3. Do you think it's a > difficult task (and the documentation [1] available should be > sufficient) ? > > [1] http://cache.freescale.com/files/dsp/doc/ref_manual/MCIMX51RM.pdf
I think there is no other documentation, except the Errata for the chip. My suggestion is to take a look at the linux driver, as NAND is already supported in mainline linux (if I am not wrong). I think you can drop the "auto" support in the NAND controller, as this is helpful with more as one chip. Maybe it can be added in a second time. > Sorry I forgot to mention, originally I wasn't using u-boot from > mainline (my tests refer to u-boot from freescale -r9.2) but I'm > switching to use u-boot from mainline on the board so I'm asking here > instead of "freescale's channel". Whenever possible, using a free > software solution is the best solution. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
