> Now that a unified imx8mn-u-boot is available, remove duplicated
> code for generating flash.bin and other common imx8mn peripherals.
> Signed-off-by: Adam Ford <aford...@gmail.com>
> diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi 
> b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
> index 3fdb20cb35..54f3ebe88b 100644
> --- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
> @@ -3,66 +3,7 @@
>   * Copyright 2019, 2021 NXP
>   */
>  
> -/ {
> -     binman: binman {
> -             multiple-images;
> -     };
> -
> -     wdt-reboot {
> -             compatible = "wdt-reboot";
> -             wdt = <&wdog1>;
> -             u-boot,dm-spl;
> -     };
> -     firmware {
> -             optee {
> -                     compatible = "linaro,optee-tz";
> -                     method = "smc";
> -             };
> -     };
> -};
> -
> -&{/soc@0} {
> -     u-boot,dm-pre-reloc;
> -     u-boot,dm-spl;
> -};
> -
> -&spba1 {
> -     u-boot,dm-spl;
> -};
> -
> -&spba1 {
> -     u-boot,dm-spl;
> -};
> -
> -&clk {
> -     u-boot,dm-spl;
> -     u-boot,dm-pre-reloc;
> -     /delete-property/ assigned-clocks;
> -     /delete-property/ assigned-clock-parents;
> -     /delete-property/ assigned-clock-rates;
> -};
> -
> -&osc_24m {
> -     u-boot,dm-spl;
> -     u-boot,dm-pre-reloc;
> -};
> -
> -&aips1 {
> -     u-boot,dm-spl;
> -     u-boot,dm-pre-reloc;
> -};
> -
> -&aips2 {
> -     u-boot,dm-spl;
> -};
> -
> -&aips3 {
> -     u-boot,dm-spl;
> -};
> -
> -&iomuxc {
> -     u-boot,dm-spl;
> -};
> +#include "imx8mn-u-boot.dtsi"
>  
>  &pinctrl_reg_usdhc2_vmmc {
>       u-boot,dm-spl;
> @@ -147,130 +88,3 @@
>       mmc-hs400-1_8v;
>       mmc-hs400-enhanced-strobe;
>  };
> -
> -&wdog1 {
> -     u-boot,dm-spl;
> -};
> -
> -&binman {
> -      u-boot-spl-ddr {
> -             filename = "u-boot-spl-ddr.bin";
> -             pad-byte = <0xff>;
> -             align-size = <4>;
> -             align = <4>;
> -
> -             u-boot-spl {
> -                     align-end = <4>;
> -             };
> -
> -             ddr-1d-imem-fw {
> -                     filename = "ddr4_imem_1d_201810.bin";
> -                     type = "blob-ext";
> -                     align-end = <4>;
> -             };
> -
> -             ddr-1d-dmem-fw {
> -                     filename = "ddr4_dmem_1d_201810.bin";
> -                     type = "blob-ext";
> -                     align-end = <4>;
> -             };
> -
> -             ddr-2d-imem-fw {
> -                     filename = "ddr4_imem_2d_201810.bin";
> -                     type = "blob-ext";
> -                     align-end = <4>;
> -             };
> -
> -             ddr-2d-dmem-fw {
> -                     filename = "ddr4_dmem_2d_201810.bin";
> -                     type = "blob-ext";
> -                     align-end = <4>;
> -             };
> -     };
> -
> -
> -     spl {
> -             filename = "spl.bin";
> -
> -             mkimage {
> -                     args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 
> 0x912000";
> -
> -                     blob {
> -                             filename = "u-boot-spl-ddr.bin";
> -                     };
> -             };
> -     };
> -
> -     itb {
> -             filename = "u-boot.itb";
> -
> -             fit {
> -                     description = "Configuration to load ATF before U-Boot";
> -                     #address-cells = <1>;
> -                     fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
> -
> -                     images {
> -                             uboot {
> -                                     description = "U-Boot (64-bit)";
> -                                     type = "standalone";
> -                                     arch = "arm64";
> -                                     compression = "none";
> -                                     load = <CONFIG_SYS_TEXT_BASE>;
> -
> -                                     uboot_blob: blob-ext {
> -                                             filename = "u-boot-nodtb.bin";
> -                                     };
> -                             };
> -
> -                             atf {
> -                                     description = "ARM Trusted Firmware";
> -                                     type = "firmware";
> -                                     arch = "arm64";
> -                                     compression = "none";
> -                                     load = <0x960000>;
> -                                     entry = <0x960000>;
> -
> -                                     atf_blob: blob-ext {
> -                                             filename = "bl31.bin";
> -                                     };
> -                             };
> -
> -                             fdt {
> -                                     description = "NAME";
> -                                     type = "flat_dt";
> -                                     compression = "none";
> -
> -                                     uboot_fdt_blob: blob-ext {
> -                                             filename = "u-boot.dtb";
> -                                     };
> -                             };
> -                     };
> -
> -                     configurations {
> -                             default = "conf";
> -
> -                             conf {
> -                                     description = "NAME";
> -                                     firmware = "uboot";
> -                                     loadables = "atf";
> -                                     fdt = "fdt";
> -                             };
> -                     };
> -             };
> -     };
> -
> -     imx-boot {
> -             filename = "flash.bin";
> -             pad-byte = <0x00>;
> -
> -             spl: blob-ext@1 {
> -                     offset = <0x0>;
> -                     filename = "spl.bin";
> -             };
> -
> -             uboot: blob-ext@2 {
> -                     offset = <0x58000>;
> -                     filename = "u-boot.itb";
> -             };
> -     };
> -};
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================

Reply via email to