On Thu, Sep 1, 2022 at 11:36 AM <tkuw584...@gmail.com> wrote: > > From: Takahiro Kuwano <takahiro.kuw...@infineon.com> > > For S25hx-T support in Linux (single die package only), flash's internal > address mode is not changed and it is assumed as factory default. Current > implementation of u-boot forces to 4-byte address mode while some parts > are 3-byte address mode by default. That will cause a problem when we use > u-boot to load the Linux kernel. This series tries to avoid the problem, > by porting two changes from linux [0][1] and additional rework. > > [0] > https://patchwork.ozlabs.org/project/linux-mtd/patch/20200525091544.17270-7-p.ya...@ti.com/ > [1] > https://patchwork.ozlabs.org/project/linux-mtd/patch/20220725092505.446315-6-tudor.amba...@microchip.com/ > > Takahiro Kuwano (4): > mtd: spi-nor-core: Default to addr_width of 3 for configurable widths > mtd: spi-nor-core: Track flash's internal address mode > mtd: spi-nor-core: Rework spansion_read/write_any_reg() to use > addr_mode_nbytes > mtd: spi-nor-core: Rework s25hx_t_post_bfpt_fixup() for flash's > internal address mode
Applied to u-boot-spi/master
