On Dec 28, 2010, at 5:47 PM, Peter Tyser wrote: > This change does the following: > - Adds printing of negotiated link width. This information can be > useful when debugging PCIe issues. > - Makes it optional for boards to implement board_serdes_name(). > Previously boards that did not implement it would print unsightly > output such as "PCIE1: Connected to <NULL>..." > - Rewords the PCIe boot output to reduce line length and to make it > clear that the "base address XYZ" value refers to the base address of > the internal processor PCIe registers and not a standard PCI BAR > value. > - Changes "PCIE" output to the standard "PCIe" > > Before change: > PCIE1: connected to <NULL> as Root Complex (base addr ef008000) > 01:00.0 - 10b5:8518 - Bridge device > 02:01.0 - 10b5:8518 - Bridge device > 02:02.0 - 10b5:8518 - Bridge device > 02:03.0 - 10b5:8518 - Bridge device > PCIE1: Bus 00 - 05 > PCIE2: connected to <NULL> as Endpoint (base addr ef009000) > PCIE2: Bus 06 - 06 > > After change: > PCIe1: Root Complex of PEX8518 Switch, x4, regs @ 0xef008000 > 01:00.0 - 10b5:8518 - Bridge device > 02:01.0 - 10b5:8518 - Bridge device > 02:02.0 - 10b5:8518 - Bridge device > 02:03.0 - 10b5:8518 - Bridge device > PCIe1: Bus 00 - 05 > PCIe2: Endpoint of VPX Fabric A, x2, regs @ 0xef009000 > PCIe2: Bus 06 - 06 > > Signed-off-by: Peter Tyser <pty...@xes-inc.com> > --- > This applies to Kumar's u-boot-85xx.git 'dev' branch.
applied to 85xx - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
