-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Scott
> > I don't see any of my comments on v3 addressed or responded to: > http://lists.denx.de/pipermail/u-boot/2010-December/083601.html On 12/14/2010 08:05 AM, Scott Wood wrote: >> nand_spl/nand_boot_jz4740.c | 344 >> +++++++++++++++++++++++++++++ > > As I asked last time, is there any reason you can't use the standard > nand_boot.c? Your non-SPL NAND driver looks like the type that would > work with it. thanks for point out, in next version patches, I will remove the nand_boot_jz4740.c > >> +LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds >> +LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) >> +AFLAGS += -DCONFIG_NAND_SPL >> +CFLAGS += -DCONFIG_NAND_SPL -O2 > > Are you sure you want -O2 and not -Os? What are the space constraints > for this SPL? > the nand_spl must less then 8kb. ~~~ #The boot program can load two areas of data from NAND flash to internal SRAM, one is the normal #area up to 8KB starting from NAND flash address 0, the other is the backup area up to 8KB starting #from NAND flash address 0x2000. After reset, the boot program will first read the normal area data #from NAND flash using hardware Reed-Solomon ECC. If no ECC error is detected or ECC error is #correctable, the boot program then branches to internal SRAM at 4 bytes offset. If it detects an #uncorrectable ECC error, it will continue to read the backup area of data from NAND flash using #hardware Reed-Solomon ECC. ~~~ I try to add "-Os", then I got some compile error: ~~~ mipsel-openwrt-linux-gcc -g -Os -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x80100000 -I/home/xiangfu/workspace/PanGu/u-boot.upstream/include -fno-builtin -ffreestanding -nostdinc -isystem /home/xiangfu/workspace/PanGu/openwrt-xburst/staging_dir/toolchain-mipsel_gcc-4.3.3+cs_uClibc-0.9.30.1/usr/lib/gcc/mipsel-openwrt-linux-uclibc/4.3.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -msoft-float -march=4kc -mtune=4kc -mabicalls -mips32 -Wall -Wstrict-prototypes -fno-stack-protector -DCONFIG_NAND_SPL -Os -c -o jz4740_nand.o jz4740_nand.c jz4740_nand.c: In function 'board_nand_init': jz4740_nand.c:298: warning: implicit declaration of function 'usb_boot' cd /home/xiangfu/workspace/PanGu/u-boot.upstream/nand_spl/board/xburst/nanonote && mipsel-openwrt-linux-ld -Bstatic -T /home/xiangfu/workspace/PanGu/u-boot.upstream/nand_spl/board/xburst/nanonote/u-boot.lds -Ttext 0x80000000 $UNDEF_SYM start.o usbboot.o nand_boot.o cpu.o jz4740.o jz_serial.o jz4740_nand.o \ -Map /home/xiangfu/workspace/PanGu/u-boot.upstream/nand_spl/u-boot-spl.map \ -o /home/xiangfu/workspace/PanGu/u-boot.upstream/nand_spl/u-boot-spl jz4740.o: In function `sdram_init': jz4740.c:(.text+0x60): undefined reference to `memcpy' ~~~ >> +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl.bin >> + dd bs=1024 count=8 if=/dev/zero of=$(nandobj)junk1 >> + cat $< $(nandobj)junk1 > $(nandobj)junk2 >> + dd bs=1024 count=8 if=$(nandobj)junk2 of=$(nandobj)junk3 >> + cat $(nandobj)junk3 $(nandobj)junk3 > $(nandobj)junk4 >> + dd bs=1024 count=256 if=/dev/zero of=$(nandobj)junk5 >> + cat $(nandobj)junk4 $(nandobj)junk5 > $(nandobj)junk6 >> + dd bs=1024 count=256 if=$(nandobj)junk6 of=$@ >> + rm -f $(nandobj)junk* > > Again, please explain what's going on here. Other boards don't do this. > add comments in "Makefile" in next patches. - -- Best Regards Xiangfu Liu http://www.openmobilefree.net -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk0p2LEACgkQRRAEFRxkgLSVCwCeIQ3AC86hiUy98sBLoG8Zq1EE WP8An3a8aIyzzwDJ46I/wBNytwGyJTyK =YvtK -----END PGP SIGNATURE----- _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
