The phycore_rk3288 board has a SPL size problem,
so remove phycore_init() function to stay within the limits.
Signed-off-by: Johan Jonker <jbx6...@gmail.com>
---
arch/arm/mach-rockchip/rk3288/Kconfig | 1 -
board/phytec/phycore_rk3288/phycore-rk3288.c | 46 --------------------
2 files changed, 47 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig
b/arch/arm/mach-rockchip/rk3288/Kconfig
index e8c57843..1be2b585 100644
--- a/arch/arm/mach-rockchip/rk3288/Kconfig
+++ b/arch/arm/mach-rockchip/rk3288/Kconfig
@@ -89,7 +89,6 @@ config TARGET_MIQI_RK3288
config TARGET_PHYCORE_RK3288
bool "phyCORE-RK3288"
select BOARD_LATE_INIT
- select SPL_BOARD_INIT if SPL
help
Add basic support for the PCM-947 carrier board, a RK3288 based
development board made by PHYTEC. This board works in a combination
diff --git a/board/phytec/phycore_rk3288/phycore-rk3288.c
b/board/phytec/phycore_rk3288/phycore-rk3288.c
index 17b987f6..3f49f39e 100644
--- a/board/phytec/phycore_rk3288/phycore-rk3288.c
+++ b/board/phytec/phycore_rk3288/phycore-rk3288.c
@@ -19,8 +19,6 @@
#include <netdev.h>
#include <linux/bitops.h>
#include "som.h"
-#include <power/regulator.h>
-#include <power/rk8xx_pmic.h>
static int valid_rk3288_som(struct rk3288_som *som)
{
@@ -77,47 +75,3 @@ int rk3288_board_late_init(void)
return 0;
}
-
-#ifdef CONFIG_SPL_BUILD
-#if !defined(CONFIG_SPL_OF_PLATDATA)
-static int phycore_init(void)
-{
- struct udevice *pmic;
- int ret;
-
- ret = uclass_first_device_err(UCLASS_PMIC, &pmic);
- if (ret)
- return ret;
-
-#if defined(CONFIG_SPL_POWER)
- /* Increase USB input current to 2A */
- ret = rk818_spl_configure_usb_input_current(pmic, 2000);
- if (ret)
- return ret;
-
- /* Close charger when USB lower then 3.26V */
- ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000);
- if (ret)
- return ret;
-#endif
-
- return 0;
-}
-#endif
-
-void spl_board_init(void)
-{
-#if !defined(CONFIG_SPL_OF_PLATDATA)
- int ret;
-
- if (of_machine_is_compatible("phytec,rk3288-phycore-som")) {
- ret = phycore_init();
- if (ret) {
- debug("Failed to set up phycore power settings: %d\n",
- ret);
- return;
- }
- }
-#endif
-}
-#endif
--
2.20.1
