Hi Michal, >-----Original Message----- >From: Simek, Michal <michal.si...@amd.com> >Sent: Tuesday, October 4, 2022 6:19 PM >To: Soma, Ashok Reddy <ashok.reddy.s...@amd.com>; u-boot@lists.denx.de >Cc: git (AMD-Xilinx) <g...@amd.com> >Subject: Re: [PATCH 1/2] arm64: versal: Add qspi flash mini u-boot >configuration > > > >On 9/30/22 10:55, Ashok Reddy Soma wrote: >> Add configuration file for mini u-boot configuration which runs on a >> smaller footprint from on chip memory(OCM). This configuration has >> required CONFIG's enabled to support qspi flash and uses DCC terminal >> for console output. >> >> Signed-off-by: Ashok Reddy Soma <ashok.reddy.s...@amd.com> >> --- >> >> MAINTAINERS | 1 + >> configs/xilinx_versal_mini_qspi_defconfig | 74 +++++++++++++++++++++++ >> 2 files changed, 75 insertions(+) >> create mode 100644 configs/xilinx_versal_mini_qspi_defconfig >> >> diff --git a/MAINTAINERS b/MAINTAINERS index 83346183ee..70ad67a0ce >> 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -634,6 +634,7 @@ M: Michal Simek <michal.si...@amd.com> >> S: Maintained >> T: git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git >> F: arch/arm/mach-versal/ >> +F: configs/xilinx_* > >this is not needed because it is already the part of >board/xilinx/versal/MAINTAINERS fragment. Ok, I will remove it. > >> F: drivers/net/xilinx_axi_mrmac.* >> F: drivers/soc/soc_xilinx_versal.c >> F: drivers/spi/cadence_ospi_versal.c >> diff --git a/configs/xilinx_versal_mini_qspi_defconfig >> b/configs/xilinx_versal_mini_qspi_defconfig >> new file mode 100644 >> index 0000000000..bb53e6c913 >> --- /dev/null >> +++ b/configs/xilinx_versal_mini_qspi_defconfig >> @@ -0,0 +1,74 @@ >> +CONFIG_ARM=y >> +CONFIG_SYS_CONFIG_NAME="xilinx_versal_mini_qspi" >> +CONFIG_ARCH_VERSAL=y >> +CONFIG_SYS_TEXT_BASE=0xFFFC0000 >> +CONFIG_SYS_MALLOC_LEN=0x2000 >> +CONFIG_NR_DRAM_BANKS=1 >> +CONFIG_ENV_SIZE=0x80 >> +CONFIG_DEFAULT_DEVICE_TREE="versal-mini-qspi-single" >> +CONFIG_SYS_MEM_RSVD_FOR_MMU=y >> +CONFIG_COUNTER_FREQUENCY=100000000 >> +CONFIG_VERSAL_NO_DDR=y >> +# CONFIG_PSCI_RESET is not set >> +# CONFIG_EXPERT is not set >> +CONFIG_SYS_LOAD_ADDR=0x8000000 >> +# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set # CONFIG_AUTOBOOT is not >> +set >> +CONFIG_LOGLEVEL=0 >> +CONFIG_SYS_CONSOLE_INFO_QUIET=y >> +# CONFIG_DISPLAY_CPUINFO is not set >> +CONFIG_BOARD_EARLY_INIT_R=y >> +# CONFIG_BOARD_LATE_INIT is not set >> +# CONFIG_CMDLINE_EDITING is not set >> +# CONFIG_AUTO_COMPLETE is not set >> +# CONFIG_SYS_LONGHELP is not set >> +CONFIG_SYS_PROMPT="Versal> " >> +# CONFIG_SYS_XTRACE is not set >> +# CONFIG_CMD_BDI is not set >> +# CONFIG_CMD_CONSOLE is not set >> +# CONFIG_CMD_BOOTD is not set >> +# CONFIG_CMD_BOOTM is not set >> +# CONFIG_CMD_BOOTI is not set >> +# CONFIG_CMD_ELF is not set >> +# CONFIG_CMD_FDT is not set >> +# CONFIG_CMD_GO is not set >> +# CONFIG_CMD_RUN is not set >> +# CONFIG_CMD_IMI is not set >> +# CONFIG_CMD_XIMG is not set >> +# CONFIG_CMD_EXPORTENV is not set >> +# CONFIG_CMD_IMPORTENV is not set >> +# CONFIG_CMD_EDITENV is not set >> +# CONFIG_CMD_SAVEENV is not set >> +# CONFIG_CMD_ENV_EXISTS is not set >> +# CONFIG_CMD_CRC32 is not set >> +# CONFIG_CMD_LOADB is not set >> +# CONFIG_CMD_LOADS is not set >> +# CONFIG_CMD_ECHO is not set >> +# CONFIG_CMD_ITEST is not set >> +# CONFIG_CMD_SOURCE is not set >> +# CONFIG_CMD_SETEXPR is not set >> +# CONFIG_PARTITIONS is not set >> +# CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG is not set # CONFIG_NET is not >> +set # CONFIG_DM_WARN is not set # CONFIG_DM_DEVICE_REMOVE is not set >> +# CONFIG_GPIO is not set # CONFIG_I2C is not set # CONFIG_INPUT is >> +not set # CONFIG_MMC is not set CONFIG_DM_SPI_FLASH=y >> +CONFIG_SF_DEFAULT_SPEED=30000000 >> +# CONFIG_SPI_FLASH_SMART_HWCAPS is not set # >> +CONFIG_SPI_FLASH_UNLOCK_ALL is not set CONFIG_SPI_FLASH_ISSI=y >> +CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y >> +CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y # >> +CONFIG_SPI_FLASH_USE_4K_SECTORS is not set # CONFIG_POWER is not set >> +CONFIG_ARM_DCC=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_ZYNQMP_GQSPI=y # >> +CONFIG_LMB is not set > >And please run savedefconfig for both patches to make sure that they are >aligned with the latest Kconfig layout. Sure, I will send v2 after running savedefconfig.
M
