Hi Fabio,
On 20.09.22 20:46, Fabio Estevam wrote:
Hi Stefano and Tom,
On Sun, Aug 14, 2022 at 2:25 PM Marek Vasut <ma...@denx.de> wrote:
On 8/13/22 14:03, Fabio Estevam wrote:
From: Fabio Estevam <feste...@denx.de>
When running the script to sign SPL/U-Boot on a kontron-sl-mx8mm board,
the fit_block_size was calculated as 0x1000 instead of 0x1020.
Add an extra parenthesis pair to fix it.
Signed-off-by: Fabio Estevam <feste...@denx.de>
---
Hi Stefano,
This one applies against u-boot-imx.
Since this one has not reached mainline yet, it is OK
if you want to squash this change in the original commit.
doc/imx/habv4/csf_examples/mx8m/csf.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/imx/habv4/csf_examples/mx8m/csf.sh
b/doc/imx/habv4/csf_examples/mx8m/csf.sh
index 6898513be51f..7d267a7218d3 100644
--- a/doc/imx/habv4/csf_examples/mx8m/csf.sh
+++ b/doc/imx/habv4/csf_examples/mx8m/csf.sh
@@ -40,7 +40,7 @@ dd if=csf_spl.bin of=flash.bin bs=1 seek=${spl_dd_offset}
conv=notrunc
# fitImage tree
fit_block_base=$(printf "0x%x" $(( $(sed -n "/CONFIG_SYS_TEXT_BASE=/ s@.*=@@p"
.config) - $(sed -n "/CONFIG_FIT_EXTERNAL_OFFSET=/ s@.*=@@p" .config) - 0x200 - 0x40)) )
fit_block_offset=$(printf "0x%s" $(fdtget -t x u-boot.dtb
/binman/imx-boot/uboot offset))
-fit_block_size=$(printf "0x%x" $(( ( $(fdtdump u-boot.itb 2>/dev/null | sed -n
"/^...totalsize:/ s@.*\(0x[0-9a-f]\+\).*@\1@p") + 0x1000 - 0x1 ) & ~(0x1000 - 0x1) + 0x20 ))
)
+fit_block_size=$(printf "0x%x" $(( ( ($(fdtdump u-boot.itb 2>/dev/null | sed -n
"/^...totalsize:/ s@.*\(0x[0-9a-f]\+\).*@\1@p") + 0x1000 - 0x1 ) & ~(0x1000 - 0x1)) + 0x20
)) )
sed -i "/Blocks = / s@.*@ Blocks = $fit_block_base $fit_block_offset $fit_block_size
\"flash.bin\", \\\\@" csf_fit.tmp
Reviewed-by: Marek Vasut <ma...@denx.de>
Could you please consider applying this one as a fix to 2022.10?
Thanks
I picked up this and "kontron-sl-mx8mm: Let CONFIG_SPL_FIT_IMAGE_TINY be
selected", together with Marek's "Deduplicate i.MX8M SNVS LPGPR unlock"
and the two patches from Tim. CI is running, I will send then the small
PR to Tom if everything is nice.
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
