Hi Peng, On Tue, Sep 20, 2022 at 3:56 AM Peng Fan <peng....@oss.nxp.com> wrote: > > Hi Fabio, > > Just have a question, the tcpci driver is not supported, so how > do you manage to make SDP work?
I understand that the tcpci driver is required when a USB role switch is needed. I am only using the usbotg1 as a peripheral. Here are the logs: On the host PC: $ sudo uuu -brun spl flash.bin On the console: U-Boot SPL 2022.10-rc5-00003-g9e02955991-dirty (Sep 19 2022 - 21:49:01 -0300) No pmic SEC0: RNG instantiated Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from USB SDP SDP: initialize... SDP: handle requests... Downloading file of size 885712 to 0x40400000... done Jumping to header at 0x40400000 Header Tag is not an IMX image Found header at 0x40420400 NOTICE: BL31: v2.2(release):rel_imx_5.4.47_2.2.0-0-gc949a888e NOTICE: BL31: Built : 17:18:02, Sep 19 2022 U-Boot 2022.10-rc5-00003-g9e02955991-dirty (Sep 19 2022 - 21:49:01 -0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz Reset cause: POR Model: FSL i.MX8MM EVK board DRAM: 2 GiB Core: 176 devices, 23 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@30890000 Out: serial@30890000 Err: serial@30890000 SEC0: RNG instantiated Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> One issue that I observed and haven't had a chance to debug yet is that running 'ums 0 mmc 1' works only when issued for the first time. If I interrupt with CRLC+C and then launch 'ums 0 mmc 1' again, it does not work. This is unrelated to SDP and happens when I boot from SD card as well. If you have any ideas, please let me know. Thanks, Fabio Estevam
