Add options to Makefile and Kconfig file to build IPv6
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofa...@yadro.com>
---
net/Kconfig | 10 ++++++++++
net/Makefile | 1 +
2 files changed, 11 insertions(+)
diff --git a/net/Kconfig b/net/Kconfig
index 52e261884d..24a3cfa5f4 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -174,6 +174,16 @@ config BOOTP_MAX_ROOT_PATH_LEN
help
Select maximal length of option 17 root path.
+config IPV6
+ bool "IPv6 support"
+ help
+ Enable IPv6 support. It includes Neighbour Discovery protocol, ICMPv6
+ and auxiliary stuff to make it work. Since it is enabled u-boot
+ network subsystem can get and handle incoming packets and send packets
+ through IPv6 network. It allows to use environment variables such as
+ ip6addr, serverip6. If a u-boot command is capable to parse an IPv6
+ address and find it, it will force using IPv6 in the network stack.
+
endif # if NET
config SYS_RX_ETH_BUFFER
diff --git a/net/Makefile b/net/Makefile
index 6c812502d3..4ea2a14f27 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_DM_MDIO_MUX) += mdio-mux-uclass.o
obj-$(CONFIG_NET) += eth_common.o
obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o
obj-$(CONFIG_NET) += net.o
+obj-$(CONFIG_IPV6) += net6.o
obj-$(CONFIG_CMD_NFS) += nfs.o
obj-$(CONFIG_CMD_PING) += ping.o
obj-$(CONFIG_CMD_PCAP) += pcap.o
--
2.25.1
