Hello Pali, > -----Original Message----- > From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Pali Rohar > Sent: Monday, September 5, 2022 11:14 AM > To: ZHIZHIKIN Andrey <andrey.zhizhi...@leica-geosystems.com> > Cc: u-boot@lists.denx.de > Subject: Re: [PATCH v1 0/2] serial_mxc: fixing reception > > On Monday 05 September 2022 09:12:49 ZHIZHIKIN Andrey wrote: > > Hello Pali, > > > > > -----Original Message----- > > > From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Pali Rohar > > > Sent: Monday, September 5, 2022 10:59 AM > > > To: u-boot@lists.denx.de > > > Subject: Re: [PATCH v1 0/2] serial_mxc: fixing reception > > > > > > On Monday 05 September 2022 10:53:58 Johannes Schneider wrote: > > > > while writing to a imx-serial device is probably thoroughly tested - and > > > obviosly works for the debug-serial - using a serial driver to read data > received > > > over the serial interface does not work reliably. > > > > > > > > the patches in this series address issues found during the > > > > implementation > of a > > > custom uboot-command to query a coprocessor, connected to an imx8mm over > uart4, > > > for mainboard-identification strings > > > > > > > > > > > > Johannes Schneider (2): > > > > serial: mxc: enable the RX pipeline > > > > serial: mxc: have putc use the TXFIFO > > > > > > > > drivers/serial/serial_mxc.c | 13 ++++++++++++- > > > > 1 file changed, 12 insertions(+), 1 deletion(-) > > > > > > Hello! I'm really not maintainer of mxc and I do not have time to review > > > those patches. So please do not send me them as I'm spammed with tons of > > > unrelated emails/patches. > > > > Then there is a problem with having your name as a maintainer for this file. > > > > If I execute: > > $ ./scripts/get_maintainer.pl drivers/serial/serial_mxc.c > > "Pali Rohár" <p...@kernel.org> > (commit_signer:1/1=100%,authored:1/1=100%,added_lines:2/2=100%,removed_lines:2/2= > 100%) > > u-boot@lists.denx.de (open list) > > > > I guess this has to be corrected then, right? > > > > Regards, > > Andrey > > Yes, please correct it. I have not added myself to the list of mxc > maintainers and I a really do not have time for reviewing mxc patches.
I cannot modify this part since removing you from maintainer list would require a transfer of maintainership of this component to another name, which I do not know. I've Cc:'d Tom and people from imx world here so they can make a decision on who shall continue the maintenance of this file when your entry is removed. -- andrey
