Add net_ip6_handler (an IPv6 packet handler) into net_loop. Add
neighbor discovery mechanism into network init process. That is the
main step to run IPv6 in u-boot. Now u-boot is capable to use NDP and
handle IPv6 packets.
Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofa...@yadro.com>
---
net/net.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/net/net.c b/net/net.c
index 81905f6315..f818170930 100644
--- a/net/net.c
+++ b/net/net.c
@@ -91,6 +91,8 @@
#include <image.h>
#include <log.h>
#include <net.h>
+#include <net6.h>
+#include <ndisc.h>
#include <net/fastboot.h>
#include <net/tftp.h>
#if defined(CONFIG_CMD_PCAP)
@@ -340,8 +342,17 @@ void net_auto_load(void)
static int net_init_loop(void)
{
- if (eth_get_dev())
+ if (eth_get_dev()) {
memcpy(net_ethaddr, eth_get_ethaddr(), 6);
+
+ if (IS_ENABLED(CONFIG_IPV6)) {
+ ip6_make_lladdr(&net_link_local_ip6, net_ethaddr);
+ if (!memcmp(&net_ip6, &net_null_addr_ip6,
+ sizeof(struct in6_addr)))
+ memcpy(&net_ip6, &net_link_local_ip6,
+ sizeof(struct in6_addr));
+ }
+ }
else
/*
* Not ideal, but there's no way to get the actual error, and I
@@ -382,6 +393,7 @@ int net_init(void)
(i + 1) * PKTSIZE_ALIGN;
}
arp_init();
+ ndisc_init();
net_clear_handlers();
/* Only need to setup buffer pointers once. */
@@ -563,6 +575,10 @@ restart:
if (arp_timeout_check() > 0)
time_start = get_timer(0);
+ if (IS_ENABLED(CONFIG_IPV6)) {
+ if (use_ip6 && (ndisc_timeout_check() > 0))
+ time_start = get_timer(0);
+ }
/*
* Check the ethernet for a new packet. The ethernet
* receive routine will process it.
@@ -1187,6 +1203,11 @@ void net_process_received_packet(uchar *in_packet, int
len)
case PROT_RARP:
rarp_receive(ip, len);
break;
+#endif
+#if IS_ENABLED(CONFIG_IPV6)
+ case PROT_IP6:
+ net_ip6_handler(et, (struct ip6_hdr *)ip, len);
+ break;
#endif
case PROT_IP:
debug_cond(DEBUG_NET_PKT, "Got IP\n");
--
2.25.1
