From: Quentin Schulz <quentin.sch...@theobroma-systems.com> This migrates the generation of u-boot-rockchip.bin from Makefile to binman completely.
This also adds support for generating the same kind of image than u-boot-rockchip.bin but for SPI flashes (specifically, a different image type generated by mkimage is necessary, in addition to a different offset in the storage medium). This has been tested on Puma RK3399 with patch series from https://lore.kernel.org/u-boot/20220722160655.3904213-1-foss+ub...@0leil.net/#b (plus https://lore.kernel.org/u-boot/20220722113505.3875669-4-foss+ub...@0leil.net/). Cheers, Quentin v5: - rebased on latest master, - added binman test for mkimage multiple data files, - fixed mkimage data files to pass full paths to input files to mkimage, v4: - added binman test for mkimage filename, - fixed >80 chars line in patch 2/8 binman: allow user-defined filenames for mkimage entry, - fixed wrong location for endif in patch 6/8 simplify binman image dependencies addition to INPUTS, v3: - removed https://lore.kernel.org/u-boot/20220722113505.3875669-4-foss+ub...@0leil.net/, it'll be added later on in a separate patch series, - added "binman: allow user-defined filenames for mkimage entry," - kept idbloader.img binary creation even with binman as requested by community, - generate idbloader-spi.img binary with binman, - added "rockchip: remove binman temporary files when cleaning" v2: - removed patch 4/8 rockchip: pad u-boot-rockchip.bin correctly because it would break partitions table, - rebased on top of master, changes to patch 3/7 rockchip: remove unneeded CONFIG_SPL_PAD_TO compared to the RFC 3/8 rockchip: remove unneeded CONFIG_SPL_PAD_TO, Quentin Schulz (8): binman: add support for skipping file concatenation for mkimage binman: allow user-defined filenames for mkimage entry rockchip: remove binman temporary files when cleaning rockchip: generate idbloader.img content for u-boot-rockchip.bin with binman for ARM rockchip: generate u-boot-rockchip.bin with binman for ARM64 boards rockchip: simplify binman image dependencies addition to INPUTS rockchip: allow to build SPI images even without HAS_ROM option rockchip: add u-boot-rockchip-spi.bin image for booting from SPI-NOR flash Makefile | 41 +++------------ arch/arm/Kconfig | 2 +- arch/arm/dts/rk3288-u-boot.dtsi | 2 +- arch/arm/dts/rk3399-u-boot.dtsi | 2 +- arch/arm/dts/rockchip-u-boot.dtsi | 46 +++++++++++++++- arch/arm/mach-rockchip/Kconfig | 6 +-- tools/binman/entries.rst | 22 ++++++++ tools/binman/etype/mkimage.py | 52 ++++++++++++++++--- tools/binman/ftest.py | 23 ++++++++ .../test/241_mkimage_multiple_data_files.dts | 21 ++++++++ tools/binman/test/242_mkimage_filename.dts | 20 +++++++ 11 files changed, 188 insertions(+), 49 deletions(-) create mode 100644 tools/binman/test/241_mkimage_multiple_data_files.dts create mode 100644 tools/binman/test/242_mkimage_filename.dts -- 2.37.2
