On Tue, Aug 16, 2022 at 10:33 AM Michael Nazzareno Trimarchi
<mich...@amarulasolutions.com> wrote:
>
> Hi
>
> Il lun 15 ago 2022, 23:55 Pali Rohár <p...@kernel.org> ha scritto:
>>
>> On Monday 15 August 2022 23:49:17 Michael Nazzareno Trimarchi wrote:
>> > Hi
>> >
>> > Il lun 15 ago 2022, 10:01 Pali Rohár <p...@kernel.org> ha scritto:
>> >
>> > > Subpage write support for freescale eLBC NAND controller driver is
>> > > implemented in U-Boot and was fixes in the commit d3963721d93f ("nand:
>> > > Sync
>> > > with Linux v4.1").
>> > >
>> > > So remove NAND_NO_SUBPAGE_WRITE flag from the fsl_elbc_nand.c driver.
>> > > This
>> > > partially revert commit cb04c7723429 ("nand/fsl: add
>> > > NAND_NO_SUBPAGE_WRITE
>> > > to eLBC and IFC drivers"), only eLBC driver part.
>> > >
>> > > With this change U-Boot with default settings can read from NAND UBIFS
>> > > image created on Linux with Linux default settings. Prior this change
>> > > U-Boot was unable to read from NAND UBIFS images created with Linux
>> > > default
>> > > settings due to differnet UBI geometry.
>> > >
>> > > Linux kernel fsl_elbc_nand.c driver also does not set
>> > > NAND_NO_SUBPAGE_WRITE
>> > > flag and has implemented subpage write support.
>> > >
>> > > Fixes: cb04c7723429 ("nand/fsl: add NAND_NO_SUBPAGE_WRITE to eLBC and IFC
>> > > drivers")
>> > > Fixes: d3963721d93f ("nand: Sync with Linux v4.1")
>> > > Signed-off-by: Pali Rohár <p...@kernel.org>
>> > > ---
>> > > See also email thread:
>> > > https://lore.kernel.org/u-boot/20220807120027.2zz43afbqtqljhul@pali/t/#u
>> > > ---
>> > > drivers/mtd/nand/raw/fsl_elbc_nand.c | 1 -
>> > > 1 file changed, 1 deletion(-)
>> > >
>> > > diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c
>> > > b/drivers/mtd/nand/raw/fsl_elbc_nand.c
>> > > index 48a3687f2728..e28670a4724a 100644
>> > > --- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
>> > > +++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
>> > > @@ -732,7 +732,6 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr,
>> > > struct udevice *dev)
>> > > nand->bbt_md = &bbt_mirror_descr;
>> > >
>> > > /* set up nand options */
>> > > - nand->options = NAND_NO_SUBPAGE_WRITE;
>> > > nand->bbt_options = NAND_BBT_USE_FLASH;
>> > >
>> > > nand->controller = &elbc_ctrl->controller;
>> > >
>> >
>> > Reviewed-by: Michael Trimarchi <mich...@amarulasolutions.com>
>> >
>> > I was following the thread. Please confirm that you was able to test
>>
>> Yes, I have tested this change on P2020 based board Turris 1.1. And
>> finally U-Boot by default was able to access UBI created by mainline
>> Linux with default parameters, just by calling 'ubi part rootfs'.
>> UBI created by sub-page of size 2048 can be still also read by U-Boot by
>> calling 'ubi part rootfs 2048'. For this purpose I already provided
>> distroboot patch to easily specify UBI header offset (which is by
>> default sub-page size):
>> https://lore.kernel.org/u-boot/20220807190422.20157-1-p...@kernel.org/
>
>
>
> Acked-By: Michael Trimarchi<mich...@amarulasolutions.com>
>
> I will send pull request tomorrow to Tom
>
Applied thanks
> Michael
>>
>>
>>
>> > Michael
>> >
>> > > --
>> > > 2.20.1
>> > >
>> > >
--
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
mich...@amarulasolutions.com
__________________________________
Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
i...@amarulasolutions.com
www.amarulasolutions.com
