From: Marcel Ziswiler <marcel.ziswi...@toradex.com> - integrate bootcount using SNVS_LP general purpose register LPGPR0 - enable CRC32 and MD5 - enable time commands - enable GPIO LED support - enable further eMMC HS400 functionality - enable fixed PHY and MDIO driver model - enable USB host functionality - enable thermal management unit driver - enable hexdump
Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> --- configs/verdin-imx8mp_defconfig | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig index 8a6765fbf9d..2e213d41860 100644 --- a/configs/verdin-imx8mp_defconfig +++ b/configs/verdin-imx8mp_defconfig @@ -18,7 +18,10 @@ CONFIG_TARGET_VERDIN_IMX8MP=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y +CONFIG_BOOTCOUNT_BOOTLIMIT=3 +CONFIG_SYS_BOOTCOUNT_ADDR=0x30370090 CONFIG_SPL=y +CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y CONFIG_IMX_BOOTAUX=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 CONFIG_SYS_LOAD_ADDR=0x48200000 @@ -65,7 +68,9 @@ CONFIG_SYS_PBSIZE=2081 # CONFIG_BOOTM_NETBSD is not set CONFIG_CMD_ASKENV=y # CONFIG_CMD_EXPORTENV is not set -# CONFIG_CMD_CRC32 is not set +CONFIG_CRC32_VERIFY=y +CONFIG_CMD_MD5SUM=y +CONFIG_MD5SUM_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y CONFIG_CMD_FUSE=y @@ -74,12 +79,14 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_READ=y CONFIG_CMD_USB=y +CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y CONFIG_CMD_UUID=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y # CONFIG_ISO_PARTITION is not set -# CONFIG_EFI_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_SPL_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y @@ -97,7 +104,7 @@ CONFIG_SPL_DM=y CONFIG_REGMAP=y CONFIG_SYSCON=y CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_ENV=y +CONFIG_SYS_BOOTCOUNT_MAGIC=0xB0C40000 CONFIG_CLK_COMPOSITE_CCF=y CONFIG_CLK_IMX8MP=y CONFIG_GPIO_HOG=y @@ -106,30 +113,39 @@ CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y # CONFIG_SPL_DM_I2C is not set CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_LED=y +CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y +CONFIG_SPL_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y +CONFIG_SPL_MMC_UHS_SUPPORT=y CONFIG_MMC_HS400_ES_SUPPORT=y CONFIG_MMC_HS400_SUPPORT=y +CONFIG_SPL_MMC_HS400_SUPPORT=y CONFIG_FSL_USDHC=y CONFIG_PHY_ADDR_ENABLE=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_DM_ETH_PHY=y CONFIG_DWC_ETH_QOS=y CONFIG_DWC_ETH_QOS_IMX=y CONFIG_FEC_MXC=y CONFIG_RGMII=y CONFIG_MII=y +CONFIG_PHY_IMX8MQ_USB=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y CONFIG_SPL_POWER_LEGACY=y CONFIG_POWER_DOMAIN=y CONFIG_IMX8M_POWER_DOMAIN=y +CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y @@ -141,8 +157,17 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y +CONFIG_IMX_TMU=y CONFIG_USB=y -# CONFIG_SPL_DM_USB is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y CONFIG_USB_EHCI_HCD=y +CONFIG_MXC_USB_OTG_HACTIVE=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_HOST_ETHER=y CONFIG_IMX_WATCHDOG=y +CONFIG_HEXDUMP=y CONFIG_OF_LIBFDT_OVERLAY=y -- 2.35.1
