[PATCH 12/22] board: lsxl: use CONFIG_DEFAULT_FDT_FILE

[Michael Walle]

Drop our own CONFIG_FDTFILE handling in favor of the generic
CONFIG_DEFAULT_FDT_FILE one.

Signed-off-by: Michael Walle <mich...@walle.cc>
---
 configs/lschlv2_defconfig |  1 +
 configs/lsxhl_defconfig   |  1 +
 include/configs/lsxl.h    | 14 +++-----------
 3 files changed, 5 insertions(+), 11 deletions(-)

diff --git a/configs/lschlv2_defconfig b/configs/lschlv2_defconfig
index 081a2448fc..d5cd0d5575 100644
--- a/configs/lschlv2_defconfig
+++ b/configs/lschlv2_defconfig
@@ -25,6 +25,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/sda2"
 CONFIG_BOOTCOMMAND="run bootcmd_${bootsource}"
+CONFIG_DEFAULT_FDT_FILE="kirkwood-lschlv2.dtb"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/lsxhl_defconfig b/configs/lsxhl_defconfig
index 33bec60147..8f0672b189 100644
--- a/configs/lsxhl_defconfig
+++ b/configs/lsxhl_defconfig
@@ -26,6 +26,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/sda2"
 CONFIG_BOOTCOMMAND="run bootcmd_${bootsource}"
+CONFIG_DEFAULT_FDT_FILE="kirkwood-lsxhl.dtb"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index db5f7a93f9..fb9a8c5032 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -22,21 +22,13 @@
 /*
  * Default environment variables
  */
-
-#if defined(CONFIG_LSXHL)
-#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
-#elif defined(CONFIG_LSCHLV2)
-#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
-#else
-#error "Unsupported board"
-#endif
-
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "bootsource=legacy\0"                                           \
        "hdpart=0:1\0"                                                  \
        "kernel_addr=0x00800000\0"                                      \
        "ramdisk_addr=0x01000000\0"                                     \
        "fdt_addr=0x00ff0000\0"                                         \
+       "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0"                         \
        "bootcmd_legacy=sata init "                                     \
                "&& load sata ${hdpart} ${kernel_addr} /uImage.buffalo "\
                "&& load sata ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
@@ -44,7 +36,7 @@
        "bootcmd_net=bootp ${kernel_addr} vmlinuz "                     \
                "&& tftpboot ${ramdisk_addr} initrd.img "               \
                "&& setenv ramdisk_len ${filesize} "                    \
-               "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "           \
+               "&& tftpboot ${fdt_addr} ${fdtfile} "                   \
                "&& bootz ${kernel_addr} "                              \
                        "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
        "bootcmd_hdd=sata init "                                        \
@@ -58,7 +50,7 @@
                "&& load usb 0:1 ${kernel_addr} /vmlinuz "              \
                "&& load usb 0:1 ${ramdisk_addr} /initrd.img "          \
                "&& setenv ramdisk_len ${filesize} "                    \
-               "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "       \
+               "&& load usb 0:1 ${fdt_addr} ${fdtfile} "               \
                "&& bootz ${kernel_addr} "                              \
                        "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"  \
        "bootcmd_rescue=run config_nc_dhcp; run nc\0"                   \
-- 
2.30.2