On Wed, 10 Aug 2022 12:04:46 +0300
Sergei Antonov <sap...@gmail.com> wrote:

Hi,

> There is currently a problem that U-Boot can not work on ARMv4
> because assembly imlementations of memcpy() and some other functions
> use "bx lr" instruction that is not available on ARMv4 ("mov pc, lr"
> should be used instead).

So there is a comment in the current code, right above what's shown here in
the first hunk, which says:
/*
 * We only support cores that support at least Thumb-1 and thus we use
 * 'bx lr'
 */
This was added by Tom in commit 431afb4ef9fe, when he removed some code
very close to what you are adding back now.

So what is the story here? This commit seems to suggest U-Boot doesn't support
even ARMv5 without "T", has this changed? There are probably other code
places which would need adjustment to run on ARMv4?

Tom, can you say why support for Thumb-less code / older architectures was
dropped? No users, I guess?

Sergei, can you say what is this for? Are you adding support for a SoC
with an ARM810 core from 1996?

Cheers,
Andre



> 
> A working preprocessor-based solution to this problem is found in
> arch/arm/lib/relocate.S. Move it to the "ret" macro in
> arch/arm/include/asm/assembler.h and change all "bx lr" code
> to "ret lr" in functions that may run on ARMv4. Linux source code
> deals with this problem in the same manner.
> 
> Signed-off-by: Sergei Antonov <sap...@gmail.com>
> CC: Samuel Holland <sam...@sholland.org>
> CC: Ye Li <ye...@nxp.com>
> CC: Simon Glass <s...@chromium.org>
> CC: Andre Przywara <andre.przyw...@arm.com>
> CC: Marek Vasut <ma...@denx.de>
> CC: Sean Anderson <sean.ander...@seco.com>
> CC: Tom Rini <tr...@konsulko.com>
> CC: Wolfgang Denk <w...@denx.de>
> ---
>  arch/arm/include/asm/assembler.h |  6 ++++++
>  arch/arm/lib/lib1funcs.S         |  8 ++++----
>  arch/arm/lib/memcpy.S            |  6 +++---
>  arch/arm/lib/relocate.S          | 10 ++--------
>  arch/arm/lib/setjmp.S            |  4 ++--
>  5 files changed, 17 insertions(+), 17 deletions(-)
> 
> diff --git a/arch/arm/include/asm/assembler.h 
> b/arch/arm/include/asm/assembler.h
> index b146918586..911f7a1b49 100644
> --- a/arch/arm/include/asm/assembler.h
> +++ b/arch/arm/include/asm/assembler.h
> @@ -63,11 +63,17 @@
>   */
>       .irp    c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
>       .macro  ret\c, reg
> +
> +     /* ARMv4- don't know bx lr but the assembler fails to see that */
> +#ifdef __ARM_ARCH_4__
> +     mov\c   pc, \reg
> +#else
>       .ifeqs  "\reg", "lr"
>       bx\c    \reg
>       .else
>       mov\c   pc, \reg
>       .endif
> +#endif
>       .endm
>       .endr
>  
> diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S
> index 700eee5fbb..7ff4446dd6 100644
> --- a/arch/arm/lib/lib1funcs.S
> +++ b/arch/arm/lib/lib1funcs.S
> @@ -377,7 +377,7 @@ ENTRY(__gnu_thumb1_case_sqi)
>       lsls    r1, r1, #1
>       add     lr, lr, r1
>       pop     {r1}
> -     bx      lr
> +     ret     lr
>  ENDPROC(__gnu_thumb1_case_sqi)
>  .popsection
>  
> @@ -391,7 +391,7 @@ ENTRY(__gnu_thumb1_case_uqi)
>       lsls    r1, r1, #1
>       add     lr, lr, r1
>       pop     {r1}
> -     bx      lr
> +     ret     lr
>  ENDPROC(__gnu_thumb1_case_uqi)
>  .popsection
>  
> @@ -406,7 +406,7 @@ ENTRY(__gnu_thumb1_case_shi)
>       lsls    r1, r1, #1
>       add     lr, lr, r1
>       pop     {r0, r1}
> -     bx      lr
> +     ret     lr
>  ENDPROC(__gnu_thumb1_case_shi)
>  .popsection
>  
> @@ -421,7 +421,7 @@ ENTRY(__gnu_thumb1_case_uhi)
>       lsls    r1, r1, #1
>       add     lr, lr, r1
>       pop     {r0, r1}
> -     bx      lr
> +     ret     lr
>  ENDPROC(__gnu_thumb1_case_uhi)
>  .popsection
>  #endif
> diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
> index eee7a219ce..a1c996f94e 100644
> --- a/arch/arm/lib/memcpy.S
> +++ b/arch/arm/lib/memcpy.S
> @@ -59,7 +59,7 @@
>  #endif
>  ENTRY(memcpy)
>               cmp     r0, r1
> -             bxeq    lr
> +             reteq   lr
>  
>               enter   r4, lr
>  
> @@ -148,7 +148,7 @@ ENTRY(memcpy)
>               str1b   r0, ip, cs, abort=21f
>  
>               exit    r4, lr
> -             bx      lr
> +             ret     lr
>  
>  9:           rsb     ip, ip, #4
>               cmp     ip, #2
> @@ -258,7 +258,7 @@ ENTRY(memcpy)
>  
>       .macro  copy_abort_end
>       ldmfd   sp!, {r4, lr}
> -     bx      lr
> +     ret     lr
>       .endm
>  
>  ENDPROC(memcpy)
> diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S
> index 5102bfabde..dd6f2e3bd5 100644
> --- a/arch/arm/lib/relocate.S
> +++ b/arch/arm/lib/relocate.S
> @@ -61,7 +61,7 @@ ENTRY(relocate_vectors)
>       stmia   r1!, {r2-r8,r10}
>  #endif
>  #endif
> -     bx      lr
> +     ret     lr
>  
>  ENDPROC(relocate_vectors)
>  
> @@ -127,13 +127,7 @@ relocate_done:
>       mcr     p15, 0, r0, c7, c10, 4  /* drain write buffer */
>  #endif
>  
> -     /* ARMv4- don't know bx lr but the assembler fails to see that */
> -
> -#ifdef __ARM_ARCH_4__
> -     mov     pc, lr
> -#else
> -     bx      lr
> -#endif
> +     ret     lr
>  
>  ENDPROC(relocate_code)
>  
> diff --git a/arch/arm/lib/setjmp.S b/arch/arm/lib/setjmp.S
> index 176a1d5315..2f041aeef0 100644
> --- a/arch/arm/lib/setjmp.S
> +++ b/arch/arm/lib/setjmp.S
> @@ -17,7 +17,7 @@ ENTRY(setjmp)
>       mov  ip, sp
>       stm  a1, {v1-v8, ip, lr}
>       mov  a1, #0
> -     bx   lr
> +     ret  lr
>  ENDPROC(setjmp)
>  .popsection
>  
> @@ -31,6 +31,6 @@ ENTRY(longjmp)
>       bne  1f
>       mov  a1, #1
>  1:
> -     bx   lr
> +     ret  lr
>  ENDPROC(longjmp)
>  .popsection

Reply via email to