On 8/4/22 12:34, Paul Barker wrote:
This addition allows UEFI applications running under u-boot to access
peripherals on SPI busses. It is based on the UEFI Platform
Initialization (PI) Specification, Version 1.7 Errata A (April 2020).
Only the core functionality required to discover SPI peripherals and
communicate with them is currently implemented. Other functionality such
as the legacy SPI controller interface and the ability to update the SPI
peripheral object associated with a particular SPI I/O protocol object
is currently unimplemented.
Since there are no open source implementations of this protocol to use
as an example, educated guesses/hacks have been made in cases where the
UEFI PI specification is unclear and these are documented in comments.
This implementation has been tested on the SanCloud BBE Lite and allowed
a UEFI test application to successfully communicate with a Micron
Authenta flash device connected via the SPI bus. It has also been tested
with the sandbox target using the included efi_selftest case.
The commit message should describe which protocols are actually implemented.
I still have no clue why any PI protocol should be implemented U-Boot.
You neither descibe it here nor in the cover-letter.
I would expect capsule updates to be used to update the SPI flash.
Signed-off-by: Paul Barker <paul.bar...@sancloud.com>
---
MAINTAINERS | 7 +
arch/sandbox/dts/test.dts | 8 +
include/efi_loader.h | 4 +
include/efi_spi_protocol.h | 158 +++++
lib/efi_loader/Kconfig | 8 +
lib/efi_loader/Makefile | 1 +
lib/efi_loader/efi_setup.c | 6 +
lib/efi_loader/efi_spi_protocol.c | 614 +++++++++++++++++++
lib/efi_selftest/Makefile | 1 +
lib/efi_selftest/efi_selftest_spi_protocol.c | 237 +++++++
10 files changed, 1044 insertions(+)
create mode 100644 include/efi_spi_protocol.h
create mode 100644 lib/efi_loader/efi_spi_protocol.c
create mode 100644 lib/efi_selftest/efi_selftest_spi_protocol.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 4d1930f76e44..1b5d9c37576b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -856,6 +856,13 @@ F: tools/efivar.py
F: tools/file2include.c
F: tools/mkeficapsule.c
+EFI SPI SUPPORT
+M: Paul Barker <paul.bar...@sancloud.com>
+S: Maintained
+F: include/efi_spi_protocol.h
+F: lib/efi_loader/efi_spi_protocol.c
+F: lib/efi_selftest/efi_selftest_spi_protocol.c
+
EFI VARIABLES VIA OP-TEE
M: Ilias Apalodimas <ilias.apalodi...@linaro.org>
S: Maintained
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index d1a8cc7bfb7e..5ac59140b748 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -1185,6 +1185,10 @@
compatible = "spansion,m25p16", "jedec,spi-nor";
spi-max-frequency = <40000000>;
sandbox,filename = "spi.bin";
+
+ uefi-spi-vendor = "spansion";
+ uefi-spi-part-number = "mt25p16";
+ uefi-spi-io-guid = [5deb81b8 92ad 484a 8fdd
fa75a8e4c6b8];
};
spi.bin@1 {
reg = <1>;
@@ -1193,6 +1197,10 @@
sandbox,filename = "spi.bin";
spi-cpol;
spi-cpha;
+
+ uefi-spi-vendor = "spansion";
Does the sandbox provide anything that is related to vendor spansion?
Or could the vendor be "sandbox"?
+ uefi-spi-part-number = "mt25p16";
Does the sandbox really emulate a
"Micron M25P16 Serial Flash Embedded Memory"?
+ uefi-spi-io-guid = [cd9eb3b6 1f2b 43a6 b8d7
3192d7cf7270];
This is a byte-string. The byte order in the array differs from the low
endian string representation used in the UEFI specification. To avoid
confusion, please, add a space after each byte and add a comment with
the string representation.
};
};
diff --git a/include/efi_loader.h b/include/efi_loader.h
index 3a63a1f75fdf..2eb96b08205b 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -537,6 +537,10 @@ efi_status_t efi_rng_register(void);
efi_status_t efi_tcg2_register(void);
/* Called by efi_init_obj_list() to install RISCV_EFI_BOOT_PROTOCOL */
efi_status_t efi_riscv_register(void);
+/* Called by efi_init_obj_list() to install EFI_SPI_CONFIGURATION_PROTOCOL &
+ * EFI_SPI_IO_PROTOCOL
+ */
+efi_status_t efi_spi_protocol_register(void);
/* Called by efi_init_obj_list() to do initial measurement */
efi_status_t efi_tcg2_do_initial_measurement(void);
/* measure the pe-coff image, extend PCR and add Event Log */
diff --git a/include/efi_spi_protocol.h b/include/efi_spi_protocol.h
new file mode 100644
index 000000000000..1a4456bd9349
--- /dev/null
+++ b/include/efi_spi_protocol.h
@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: BSD-2-Clause-Patent */
+/*
+ * Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
Is this really a copy from EDK II and not based on the specification?
Please, add a reference to the
"UEFI Platform Initialization (PI) Specification".
and a description what this include is about.
+ */
+
+#ifndef _EFI_SPI_PROTOCOL_H
+#define _EFI_SPI_PROTOCOL_H
+
+#include <efi.h>
+#include <efi_api.h>
+
+#define EFI_SPI_CONFIGURATION_GUID \
+ EFI_GUID(0x85a6d3e6, 0xb65b, 0x4afc, \
+ 0xb3, 0x8f, 0xc6, 0xd5, 0x4a, 0xf6, 0xdd, 0xc8)
Please, add a comment that this GUID is defined in the "UEFI Platform
Initialization (PI) Specification".
Please, add the GUID to list_guid[]in lib/uuid.c .
+
+struct efi_spi_peripheral;
+
+struct efi_spi_part {
+ efi_string_t vendor;
+ efi_string_t part_number;
Why did you remove "const" used in the specifications?
+ u32 min_clock_hz;
+ u32 max_clock_hz;
+ bool chip_select_polarity;
+};
+
+struct efi_spi_bus {
+ efi_string_t friendly_name;
+ struct efi_spi_peripheral *peripheral_list;
+ struct efi_device_path *controller_path;
+
+ efi_status_t
+ (EFIAPI * clock)(const struct efi_spi_peripheral *spi_peripheral,
+ u32 *clock_hz);
+
+ void *clock_parameter;
+};
+
+struct efi_spi_peripheral {
+ struct efi_spi_peripheral *next_spi_peripheral;
+ efi_string_t friendly_name;
+ efi_guid_t *spi_peripheral_driver_guid;
+ struct efi_spi_part *spi_part;
+ u32 max_clock_hz;
+ bool clock_polarity;
+ bool clock_phase;
+ u32 attributes;
+ void *configuration_data;
+ struct efi_spi_bus *spi_bus;
+
+ efi_status_t
+ (EFIAPI * chip_select)(const struct efi_spi_peripheral *spi_peripheral,
+ bool pin_value);
+
+ void *chip_select_parameter;
+};
+
+struct efi_spi_configuration_protocol {
+ u32 bus_count;
+ struct efi_spi_bus **bus_list;
+};
+
+#define EFI_LEGACY_SPI_CONTROLLER_GUID \
+ EFI_GUID(0x39136fc7, 0x1a11, 0x49de, \
+ 0xbf, 0x35, 0x0e, 0x78, 0xdd, 0xb5, 0x24, 0xfc)
The commit message clear states that the legacy protocol will not be
implemented. Why should we implement any *legacy*?
+
+struct efi_legacy_spi_controller_protocol;
+
+struct efi_legacy_spi_controller_protocol {
+ u32 maximum_offset;
+ u32 maximum_range_bytes;
+ u32 range_register_count;
+
+ efi_status_t
+ (EFIAPI * erase_block_opcode)(const struct
efi_legacy_spi_controller_protocol *this,
+ u8 erase_block_opcode);
+
+ efi_status_t
+ (EFIAPI * write_status_prefix)(const struct
efi_legacy_spi_controller_protocol *this,
+ u8 write_status_prefix);
+
+ efi_status_t
+ (EFIAPI * bios_base_address)(const struct
efi_legacy_spi_controller_protocol *this,
+ u32 bios_base_address);
+
+ efi_status_t
+ (EFIAPI * clear_spi_protect)(const struct
efi_legacy_spi_controller_protocol *this);
+
+ bool
+ (EFIAPI * is_range_protected)(const struct
efi_legacy_spi_controller_protocol *this,
+ u32 bios_address,
+ u32 blocks_to_protect);
+
+ efi_status_t
+ (EFIAPI * protect_next_range)(const struct
efi_legacy_spi_controller_protocol *this,
+ u32 bios_address,
+ u32 blocks_to_protect);
+
+ efi_status_t
+ (EFIAPI * lock_controller)(const struct
efi_legacy_spi_controller_protocol *this);
+};
+
+struct efi_spi_io_protocol;
+
+enum efi_spi_transaction_type {
+ SPI_TRANSACTION_FULL_DUPLEX,
+ SPI_TRANSACTION_WRITE_ONLY,
+ SPI_TRANSACTION_READ_ONLY,
+ SPI_TRANSACTION_WRITE_THEN_READ
+};
+
+struct efi_spi_bus_transaction {
+ struct efi_spi_peripheral *spi_peripheral;
+ enum efi_spi_transaction_type transaction_type;
+ bool debug_transaction;
+ u32 bus_width;
+ u32 frame_size;
+ u32 write_bytes;
+ u8 *write_buffer;
+ u32 read_bytes;
+ u8 *read_buffer;
+};
+
+struct efi_spi_io_protocol {
+ struct efi_spi_peripheral *spi_peripheral;
+ struct efi_spi_peripheral *original_spi_peripheral;
+ u32 frame_size_support_mask;
+ u32 maximum_transfer_bytes;
+ u32 attributes;
+ struct efi_legacy_spi_controller_protocol *legacy_spi_protocol;
+
+ efi_status_t
+ (EFIAPI * transaction)(const struct efi_spi_io_protocol *this,
+ enum efi_spi_transaction_type transaction_type,
+ bool debug_transaction,
+ u32 clock_hz,
+ u32 bus_width,
+ u32 frame_size,
+ u32 write_bytes,
+ u8 *write_buffer,
+ u32 read_bytes,
+ u8 *read_buffer);
+
+ efi_status_t
+ (EFIAPI * update_spi_peripheral)(struct efi_spi_io_protocol *this,
+ struct efi_spi_peripheral *spi_peripheral);
+};
+
+struct efi_spi_peripheral_priv {
+ struct efi_spi_peripheral peripheral;
+ struct efi_spi_part part;
+ struct efi_spi_io_protocol io_protocol;
+ efi_handle_t handle;
+ struct spi_slave *target;
+};
+
+efi_status_t efi_spi_protocol_register(void);
+
+#endif
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index e3f2402d0e8e..c5899a6f6e52 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -394,4 +394,12 @@ config EFI_RISCV_BOOT_PROTOCOL
replace the transfer via the device-tree. The latter is not
possible on systems using ACPI.
+config EFI_SPI_PROTOCOL
+ bool "EFI SPI protocol support"
+ depends on DM_SPI
+ help
+ Provide implementations of EFI_SPI_CONFIGURATION_PROTOCOL and
+ EFI_SPI_IO_PROTOCOL to allow UEFI applications to access devices
+ connected via SPI bus.
+
endif
diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
index f54c244c3268..9fa0d27927b6 100644
--- a/lib/efi_loader/Makefile
+++ b/lib/efi_loader/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_GENERATE_SMBIOS_TABLE) += efi_smbios.o
obj-$(CONFIG_EFI_RNG_PROTOCOL) += efi_rng.o
obj-$(CONFIG_EFI_TCG2_PROTOCOL) += efi_tcg2.o
obj-$(CONFIG_EFI_RISCV_BOOT_PROTOCOL) += efi_riscv.o
+obj-$(CONFIG_EFI_SPI_PROTOCOL) += efi_spi_protocol.o
obj-$(CONFIG_EFI_LOAD_FILE2_INITRD) += efi_load_initrd.o
obj-$(CONFIG_EFI_SIGNATURE_SUPPORT) += efi_signature.o
diff --git a/lib/efi_loader/efi_setup.c b/lib/efi_loader/efi_setup.c
index 492ecf4cb15c..ef1ee9862b72 100644
--- a/lib/efi_loader/efi_setup.c
+++ b/lib/efi_loader/efi_setup.c
@@ -295,6 +295,12 @@ efi_status_t efi_init_obj_list(void)
goto out;
}
+ if (IS_ENABLED(CONFIG_EFI_SPI_PROTOCOL)) {
+ ret = efi_spi_protocol_register();
+ if (ret != EFI_SUCCESS)
+ goto out;
+ }
+
/* Secure boot */
ret = efi_init_secure_boot();
if (ret != EFI_SUCCESS)
diff --git a/lib/efi_loader/efi_spi_protocol.c
b/lib/efi_loader/efi_spi_protocol.c
new file mode 100644
index 000000000000..c491741cbbf1
--- /dev/null
+++ b/lib/efi_loader/efi_spi_protocol.c
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2022 Micron Technology, Inc.
+ */
+
+#define LOG_CATEGORY LOGC_EFI
+
+#include <common.h>
+#include <dm/device.h>
+#include <dm/device-internal.h>
+#include <dm/read.h>
+#include <efi.h>
+#include <efi_loader.h>
+#include <efi_spi_protocol.h>
+#include <malloc.h>
+#include <spi.h>
+
+static efi_string_t convert_efi_string(const char *str)
+{
+ efi_string_t str_16, tmp;
+ size_t sz_8, sz_16;
+
+ sz_8 = strlen(str);
+ sz_16 = utf8_utf16_strlen(str);
+ str_16 = calloc(sz_16 + 1, 2);
+ if (!str_16)
+ return NULL;
+
+ tmp = str_16;
+ utf8_utf16_strcpy(&tmp, str);
+
+ return str_16;
+}
+
+static void dump_buffer(const char *msg, u32 length, u8 *buffer)
+{
+ u32 i;
+ EFI_PRINT("%s %d bytes:", msg, length);
+ for (i = 0; i < length; i++)
+ EFI_PRINT(" %02x", buffer[i]);
+ EFI_PRINT("\n");
+}
+
+static efi_status_t EFIAPI
+efi_spi_bus_clock(const struct efi_spi_peripheral *spi_peripheral,
+ u32 *clock_hz)
+{
+ EFI_ENTRY("%p, %p", spi_peripheral, clock_hz);
+ return EFI_EXIT(EFI_UNSUPPORTED);
+}
+
+static efi_status_t EFIAPI
+efi_spi_peripheral_chip_select(const struct efi_spi_peripheral *spi_peripheral,
+ bool pin_value)
+{
+ EFI_ENTRY("%p, %d", spi_peripheral, pin_value);
+ return EFI_EXIT(EFI_UNSUPPORTED);
+}
+
+static efi_status_t EFIAPI
+legacy_erase_block_opcode(const struct efi_legacy_spi_controller_protocol
*this,
+ u8 erase_block_opcode)
+{
+ EFI_ENTRY("%p, %u", this, erase_block_opcode);
+ return EFI_EXIT(EFI_UNSUPPORTED);
+}
+
+static efi_status_t EFIAPI
+legacy_write_status_prefix(const struct efi_legacy_spi_controller_protocol
*this,
+ u8 write_status_prefix)
+{
+ EFI_ENTRY("%p, %u", this, write_status_prefix);
+ return EFI_EXIT(EFI_UNSUPPORTED);
+}
+
+static efi_status_t EFIAPI
+legacy_bios_base_address(const struct efi_legacy_spi_controller_protocol *this,
+ u32 bios_base_address)
+{
+ EFI_ENTRY("%p, %u", this, bios_base_address);
+ return EFI_EXIT(EFI_UNSUPPORTED);
+}
+
+static efi_status_t EFIAPI
+legacy_clear_spi_protect(const struct efi_legacy_spi_controller_protocol *this)
+{
+ EFI_ENTRY("%p", this);
+ return EFI_EXIT(EFI_UNSUPPORTED);
+}
+
+static bool EFIAPI
+legacy_is_range_protected(const struct efi_legacy_spi_controller_protocol
*this,
+ u32 bios_address,
+ u32 blocks_to_protect)
+{
+ EFI_ENTRY("%p, %u, %u", this, bios_address, blocks_to_protect);
+ return EFI_EXIT(false);
+}
+
+static efi_status_t EFIAPI
+legacy_protect_next_range(const struct efi_legacy_spi_controller_protocol
*this,
+ u32 bios_address,
+ u32 blocks_to_protect)
+{
+ EFI_ENTRY("%p, %u, %u", this, bios_address, blocks_to_protect);
+ return EFI_EXIT(EFI_UNSUPPORTED);
+}
+
+static efi_status_t EFIAPI
+legacy_lock_controller(const struct efi_legacy_spi_controller_protocol *this)
+{
+ EFI_ENTRY("%p", this);
+ return EFI_EXIT(EFI_UNSUPPORTED);
+}
+
+static efi_status_t EFIAPI
+efi_spi_io_update_spi_peripheral(struct efi_spi_io_protocol *this,
+ struct efi_spi_peripheral *spi_peripheral)
+{
+ EFI_ENTRY("%p, %p", this, spi_peripheral);
+ return EFI_EXIT(EFI_UNSUPPORTED);
+}
+
+static efi_status_t EFIAPI
+efi_spi_io_transaction(const struct efi_spi_io_protocol *this,
+ enum efi_spi_transaction_type transaction_type,
+ bool debug_transaction,
+ u32 clock_hz,
+ u32 bus_width,
+ u32 frame_size,
+ u32 write_bytes,
+ u8 *write_buffer,
+ u32 read_bytes,
+ u8 *read_buffer)
+{
+ struct spi_slave *target;
+ efi_status_t status = EFI_SUCCESS;
+ int r;
+
+ /* We ignore the bus_width and frame_size arguments to this function as
the
+ * appropriate bus configuration for the connected device will be
performed
+ * during spi_claim_bus().
+ */
+
+ /* TODO: Print transaction details if debug_transaction is true. */
+
+ EFI_ENTRY("%p, %u, %u, %u, %u, %u, %u, %p, %u, %p",
+ this, transaction_type, debug_transaction,
+ clock_hz, bus_width, frame_size,
+ write_bytes, write_buffer, read_bytes, read_buffer);
+
+ if (!this)
+ return EFI_EXIT(EFI_INVALID_PARAMETER);
+
+ target = container_of(this, struct efi_spi_peripheral_priv,
io_protocol)->target;
+
+ if (clock_hz > this->spi_peripheral->max_clock_hz)
+ return EFI_EXIT(EFI_UNSUPPORTED);
+
+ r = spi_claim_bus(target);
+ if (r != 0)
+ return EFI_EXIT(EFI_DEVICE_ERROR);
+ EFI_PRINT("SPI IO: Bus claimed\n");
+
+ if (clock_hz) {
+ EFI_PRINT("SPI IO: Setting clock rate to %u Hz\n", clock_hz);
+
spi_get_ops(target->dev->parent)->set_speed(target->dev->parent, clock_hz);
+ } else {
+ EFI_PRINT("SPI IO: Using default clock rate\n");
+ }
+
+ switch (transaction_type) {
+ case SPI_TRANSACTION_FULL_DUPLEX:
+ EFI_PRINT("SPI IO: Full-duplex\n");
+ if (write_bytes != read_bytes || !write_bytes || !write_buffer
|| !read_buffer) {
+ status = EFI_INVALID_PARAMETER;
+ break;
+ }
+ if (debug_transaction)
+ dump_buffer("SPI IO: write", write_bytes, write_buffer);
+ r = spi_xfer(target, 8 * write_bytes,
+ write_buffer, read_buffer, SPI_XFER_ONCE);
+ EFI_PRINT("SPI IO: xfer returned %d\n", r);
+ if (debug_transaction)
+ dump_buffer("SPI IO: read", read_bytes, read_buffer);
+ status = (r == 0) ? EFI_SUCCESS : EFI_DEVICE_ERROR;
+ break;
+ case SPI_TRANSACTION_READ_ONLY:
+ EFI_PRINT("SPI IO: Read-only\n");
+ if (!read_bytes || !read_buffer) {
+ status = EFI_INVALID_PARAMETER;
+ break;
+ }
+ r = spi_xfer(target, 8 * read_bytes,
+ NULL, read_buffer, SPI_XFER_ONCE);
+ EFI_PRINT("SPI IO: xfer returned %d\n", r);
+ if (debug_transaction)
+ dump_buffer("SPI IO: read", read_bytes, read_buffer);
+ status = (r == 0) ? EFI_SUCCESS : EFI_DEVICE_ERROR;
+ break;
+ case SPI_TRANSACTION_WRITE_ONLY:
+ EFI_PRINT("SPI IO: Write-only\n");
+ if (!write_bytes || !write_buffer) {
+ status = EFI_INVALID_PARAMETER;
+ break;
+ }
+ if (debug_transaction)
+ dump_buffer("SPI IO: write", write_bytes, write_buffer);
+ r = spi_xfer(target, 8 * write_bytes,
+ write_buffer, NULL, SPI_XFER_ONCE);
+ EFI_PRINT("SPI IO: xfer returned %d\n", r);
+ status = (r == 0) ? EFI_SUCCESS : EFI_DEVICE_ERROR;
+ break;
+ case SPI_TRANSACTION_WRITE_THEN_READ:
+ EFI_PRINT("SPI IO: Write-then-read\n");
+ if (!write_bytes || !write_buffer || !read_bytes ||
!read_buffer) {
+ status = EFI_INVALID_PARAMETER;
+ break;
+ }
+ if (debug_transaction)
+ dump_buffer("SPI IO: write", write_bytes, write_buffer);
+ r = spi_xfer(target, 8 * write_bytes,
+ write_buffer, NULL, SPI_XFER_BEGIN);
+ EFI_PRINT("SPI IO: xfer [1/2] returned %d\n", r);
+ if (r != 0) {
+ status = EFI_DEVICE_ERROR;
+ break;
+ }
+ r = spi_xfer(target, 8 * read_bytes,
+ NULL, read_buffer, SPI_XFER_END);
+ EFI_PRINT("SPI IO: xfer [2/2] returned %d\n", r);
+ if (debug_transaction)
+ dump_buffer("SPI IO: read", read_bytes, read_buffer);
+ status = (r == 0) ? EFI_SUCCESS : EFI_DEVICE_ERROR;
+ break;
+ default:
+ status = EFI_INVALID_PARAMETER;
+ break;
+ }
+
+ spi_release_bus(target);
+ EFI_PRINT("SPI IO: Released bus\n");
+ return EFI_EXIT(status);
+}
+
+static struct efi_device_path null_device_path = {
+ .type = DEVICE_PATH_TYPE_END,
+ .sub_type = DEVICE_PATH_SUB_TYPE_END,
+ .length = 4
+};
+
+static struct efi_legacy_spi_controller_protocol
+dummy_legacy_spi_controller_protocol = {
+ .maximum_offset = 0,
+ .maximum_range_bytes = 0,
+ .range_register_count = 0,
+ .erase_block_opcode = legacy_erase_block_opcode,
+ .write_status_prefix = legacy_write_status_prefix,
+ .bios_base_address = legacy_bios_base_address,
+ .clear_spi_protect = legacy_clear_spi_protect,
+ .is_range_protected = legacy_is_range_protected,
+ .protect_next_range = legacy_protect_next_range,
+ .lock_controller = legacy_lock_controller
+};
In the commit message you said that the legacy protocol will not be
implemented.
Why would a *legacy* be implemented?
+
+static efi_guid_t efi_spi_configuration_guid = EFI_SPI_CONFIGURATION_GUID;
+
+static void destroy_efi_spi_peripheral(struct efi_spi_peripheral *peripheral)
+{
+ struct efi_spi_peripheral_priv *priv =
+ container_of(peripheral,
+ struct efi_spi_peripheral_priv,
+ peripheral);
+ free(priv->peripheral.friendly_name);
+ free(priv->part.vendor);
+ free(priv->part.part_number);
+ efi_delete_handle(priv->handle);
+ free(priv);
+}
+
+static void destroy_efi_spi_bus(struct efi_spi_bus *bus)
+{
+ struct efi_spi_peripheral *peripheral = bus->peripheral_list;
+
+ while (peripheral) {
+ struct efi_spi_peripheral *next =
+ peripheral->next_spi_peripheral;
+ destroy_efi_spi_peripheral(peripheral);
+ peripheral = next;
+ }
+ free(bus->friendly_name);
+ free(bus);
+}
+
+static efi_status_t efi_spi_new_handle(const efi_guid_t *guid, void *proto)
+{
+ efi_status_t status;
+ efi_handle_t handle;
+
+ status = efi_create_handle(&handle);
+ if (status != EFI_SUCCESS) {
+ printf("Failed to create EFI handle\n");
+ goto fail_1;
+ }
+
+ status = efi_add_protocol(handle, guid, proto);
+ if (status != EFI_SUCCESS) {
+ printf("Failed to add protocol\n");
+ goto fail_2;
+ }
+
+ return EFI_SUCCESS;
+
+fail_2:
+ efi_delete_handle(handle);
+fail_1:
+ return status;
+}
+
+static void
+efi_spi_init_part(struct efi_spi_part *part,
+ struct spi_slave *target,
+ efi_string_t vendor_utf16,
+ efi_string_t part_number_utf16
+)
+{
+ part->vendor = vendor_utf16;
+ part->part_number = part_number_utf16;
+ part->min_clock_hz = 0;
+ part->max_clock_hz = target->max_hz;
+ part->chip_select_polarity =
+ (target->mode & SPI_CS_HIGH) ? true : false;
+}
+
+static void
+efi_spi_init_peripheral(struct efi_spi_peripheral *peripheral,
+ struct efi_spi_part *part,
+ struct efi_spi_bus *bus,
+ struct spi_slave *target,
+ efi_guid_t *guid,
+ efi_string_t name_utf16
+)
+{
+ peripheral->friendly_name = name_utf16;
+ peripheral->spi_part = part;
+ peripheral->next_spi_peripheral = NULL;
+ peripheral->spi_peripheral_driver_guid = guid;
+ peripheral->max_clock_hz = target->max_hz;
+ peripheral->clock_polarity = (target->mode & SPI_CPOL) ? true : false;
+ peripheral->clock_phase = (target->mode & SPI_CPHA) ? true : false;
+ peripheral->attributes = 0;
+ peripheral->configuration_data = NULL;
+ peripheral->spi_bus = bus;
+ peripheral->chip_select = efi_spi_peripheral_chip_select;
+ peripheral->chip_select_parameter = NULL;
+}
+
+static void
+efi_spi_append_peripheral(struct efi_spi_peripheral *peripheral,
+ struct efi_spi_bus *bus
+)
+{
+ if (bus->peripheral_list) {
+ struct efi_spi_peripheral *tmp = bus->peripheral_list;
+
+ while (tmp->next_spi_peripheral)
+ tmp = tmp->next_spi_peripheral;
+
+ tmp->next_spi_peripheral = peripheral;
+ } else {
+ bus->peripheral_list = peripheral;
+ }
+}
+
+static void
+efi_spi_init_io_protocol(struct efi_spi_io_protocol *io_protocol,
+ struct efi_spi_peripheral *peripheral,
+ struct spi_slave *target
+)
+{
+ u32 max_read, max_write;
+
+ io_protocol->spi_peripheral = peripheral;
+ io_protocol->original_spi_peripheral = peripheral;
+ io_protocol->legacy_spi_protocol =
&dummy_legacy_spi_controller_protocol;
+ io_protocol->transaction = efi_spi_io_transaction;
+ io_protocol->update_spi_peripheral = efi_spi_io_update_spi_peripheral;
+
+ /* This is a bit of a hack. The EFI data structures do not allow us to
+ * represent a frame size greater than 32 bits.
+ */
+ if (target->wordlen <= 32)
+ io_protocol->frame_size_support_mask =
+ 1 << (target->wordlen - 1);
+ else
+ io_protocol->frame_size_support_mask = 0;
+
+ /* Again, this is a bit of a hack. The EFI data structures only allow
+ * for a single maximum transfer size whereas the u-boot spi_slave
+ * structure records maximum read transfer size and maximum write
+ * transfer size separately. So we need to take the minimum of these two
+ * values.
+ *
+ * In u-boot, a value of zero for these fields means there is no limit
+ * on the transfer size. However in the UEFI PI spec a value of zero is
+ * invalid so we'll use 0xFFFFFFFF as a substitute unlimited value.
+ */
+ max_write = target->max_write_size ? target->max_write_size :
0xFFFFFFFF;
+ max_read = target->max_read_size ? target->max_read_size : 0xFFFFFFFF;
+ io_protocol->maximum_transfer_bytes = (max_read > max_write) ?
max_write : max_read;
+
+ /* Hack++. Leave attributes set to zero since the flags listed in the
+ * UEFI PI spec have no defined numerical values and so cannot be used.
+ */
+ io_protocol->attributes = 0;
+}
+
+static efi_status_t
+export_spi_peripheral(struct efi_spi_bus *bus, struct udevice *dev)
+{
+ efi_string_t name_utf16, vendor_utf16, part_number_utf16;
+ struct efi_spi_peripheral_priv *priv;
+ efi_status_t status;
+ struct udevice *dev_bus = dev->parent;
+ struct spi_slave *target;
+ const char *name = dev_read_name(dev);
+ const char *vendor = dev_read_string(dev, "uefi-spi-vendor");
+ const char *part_number = dev_read_string(dev, "uefi-spi-part-number");
+ efi_guid_t *guid =
+ (efi_guid_t *)dev_read_u8_array_ptr(dev, "uefi-spi-io-guid",
16);
+
+ if (device_get_uclass_id(dev) == UCLASS_SPI_EMUL) {
+ debug("Skipping emulated SPI peripheral %s\n", name);
+ goto fail_1;
+ }
+
+ if (!vendor || !part_number || !guid) {
+ debug("Skipping SPI peripheral %s\n", name);
+ status = EFI_UNSUPPORTED;
+ goto fail_1;
+ }
+
+ if (!device_active(dev)) {
+ int ret = device_probe(dev);
+ if (ret) {
+ debug("Skipping SPI peripheral %s, probe failed\n",
name);
+ goto fail_1;
+ }
+ }
+
+ target = dev_get_parent_priv(dev);
+ if (!target) {
+ debug("Skipping uninitialized SPI peripheral %s\n", name);
+ status = EFI_UNSUPPORTED;
+ goto fail_1;
+ }
+
+ debug("Registering SPI dev %d:%d, name %s\n",
+ dev_bus->seq_, spi_chip_select(dev), name);
+
+ priv = calloc(1, sizeof(*priv));
+ if (!priv) {
+ status = EFI_OUT_OF_RESOURCES;
+ goto fail_1;
+ }
+
+ vendor_utf16 = convert_efi_string(vendor);
+ if (!vendor_utf16) {
+ status = EFI_OUT_OF_RESOURCES;
+ goto fail_2;
+ }
+
+ part_number_utf16 = convert_efi_string(part_number);
+ if (!part_number_utf16) {
+ status = EFI_OUT_OF_RESOURCES;
+ goto fail_3;
+ }
+
+ name_utf16 = convert_efi_string(name);
+ if (!name_utf16) {
+ status = EFI_OUT_OF_RESOURCES;
+ goto fail_4;
+ }
+
+ priv->target = target;
+
+ efi_spi_init_part(&priv->part, target, vendor_utf16, part_number_utf16);
+
+ efi_spi_init_peripheral(&priv->peripheral, &priv->part,
+ bus, target, guid, name_utf16);
+
+ efi_spi_append_peripheral(&priv->peripheral, bus);
+
+ efi_spi_init_io_protocol(&priv->io_protocol, &priv->peripheral, target);
+
+ status = efi_spi_new_handle(guid, &priv->io_protocol);
+ if (status != EFI_SUCCESS)
+ goto fail_5;
+
+ printf("Added EFI_SPI_IO_PROTOCOL for %s with guid "
+
"%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x\n",
This information does not interest any user. Please, use log_debug().
+ name,
+ guid->b[0], guid->b[1], guid->b[2], guid->b[3],
+ guid->b[4], guid->b[5], guid->b[6], guid->b[7],
+ guid->b[8], guid->b[9], guid->b[10], guid->b[11],
+ guid->b[12], guid->b[13], guid->b[14], guid->b[15]);
+ return EFI_SUCCESS;
+
+fail_5:
+ free(name_utf16);
+fail_4:
+ free(part_number_utf16);
+fail_3:
+ free(vendor_utf16);
+fail_2:
+ free(priv);
+fail_1:
+ return status;
+}
+
+static struct efi_spi_bus *export_spi_bus(int i)
+{
+ struct efi_spi_bus *bus;
+ struct udevice *dev, *child;
+ const char *name;
+ int r;
+
+ r = uclass_get_device(UCLASS_SPI, i, &dev);
+ if (r < 0) {
+ printf("Failed to get SPI bus %d\n", i);
+ goto fail_1;
+ }
+
+ name = dev_read_name(dev);
+ debug("Registering SPI bus %d, name %s\n", i, name);
+
+ bus = calloc(1, sizeof(*bus));
+ if (!bus)
+ goto fail_1;
+
+ bus->friendly_name = convert_efi_string(name);
+ if (!bus->friendly_name)
+ goto fail_2;
+
+ bus->peripheral_list = NULL;
+ bus->clock = efi_spi_bus_clock;
+ bus->clock_parameter = NULL;
+
+ /* For the purposes of the current implementation, we do not need to
expose
+ * the hardware device path to users of the SPI I/O protocol.
+ */
+ bus->controller_path = &null_device_path;
+
+ device_foreach_child(child, dev) {
+ efi_status_t status = export_spi_peripheral(bus, child);
+
+ if (status == EFI_OUT_OF_RESOURCES)
+ goto fail_3;
+ }
+
+ return bus;
+
+fail_3:
+ destroy_efi_spi_bus(bus);
+fail_2:
+ free(bus);
+fail_1:
+ return NULL;
+}
+
+efi_status_t efi_spi_protocol_register(void)
+{
+ efi_status_t status;
+ struct efi_spi_configuration_protocol *proto;
+ uint i;
+
+ printf("Registering EFI_SPI_CONFIGURATION_PROTOCOL\n");
+
+ proto = calloc(1, sizeof(*proto));
+ if (!proto) {
+ status = EFI_OUT_OF_RESOURCES;
+ goto fail_1;
+ }
+
+ proto->bus_count = uclass_id_count(UCLASS_SPI);
+ proto->bus_list = calloc(proto->bus_count, sizeof(*proto->bus_list));
+ if (!proto->bus_list) {
+ status = EFI_OUT_OF_RESOURCES;
+ goto fail_2;
+ }
+
+ for (i = 0; i < proto->bus_count; i++) {
+ proto->bus_list[i] = export_spi_bus(i);
+ if (!proto->bus_list[i])
+ goto fail_3;
+ }
+
+ status = efi_spi_new_handle(&efi_spi_configuration_guid, proto);
+ if (status != EFI_SUCCESS)
+ goto fail_3;
+
+ return EFI_SUCCESS;
+
+fail_3:
+ for (i = 0; i < proto->bus_count; i++) {
+ if (proto->bus_list[i])
+ destroy_efi_spi_bus(proto->bus_list[i]);
+ }
+ free(proto->bus_list);
+fail_2:
+ free(proto);
+fail_1:
+ return status;
+}
diff --git a/lib/efi_selftest/Makefile b/lib/efi_selftest/Makefile
index 33536c9ec021..c9b6e4fbb452 100644
--- a/lib/efi_selftest/Makefile
+++ b/lib/efi_selftest/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_EFI_LOADER_HII) += efi_selftest_hii.o
obj-$(CONFIG_EFI_RNG_PROTOCOL) += efi_selftest_rng.o
obj-$(CONFIG_EFI_GET_TIME) += efi_selftest_rtc.o
obj-$(CONFIG_EFI_TCG2_PROTOCOL) += efi_selftest_tcg2.o
+obj-$(CONFIG_EFI_SPI_PROTOCOL) += efi_selftest_spi_protocol.o
ifeq ($(CONFIG_GENERATE_ACPI_TABLE),)
obj-y += efi_selftest_fdt.o
diff --git a/lib/efi_selftest/efi_selftest_spi_protocol.c
b/lib/efi_selftest/efi_selftest_spi_protocol.c
new file mode 100644
index 000000000000..2a3723d3931f
--- /dev/null
+++ b/lib/efi_selftest/efi_selftest_spi_protocol.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2022 Micron Technology, Inc.
+ */
+
+#include <efi_selftest.h>
+#include <efi_spi_protocol.h>
+
+static struct efi_boot_services *boottime;
+static efi_guid_t efi_spi_configuration_guid = EFI_SPI_CONFIGURATION_GUID;
+
+static int setup(const efi_handle_t img_handle,
+ const struct efi_system_table *systable)
+{
+ boottime = systable->boottime;
+ return EFI_ST_SUCCESS;
+}
+
+static int test_peripheral(struct efi_spi_peripheral *p, struct efi_spi_bus
*bus)
+{
+ struct efi_spi_io_protocol *io_protocol;
+ u8 req[5], resp[5];
+ efi_status_t ret;
+
+ if (!p->friendly_name) {
+ efi_st_error("SPI peripheral lacks a friendly name\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!p->spi_peripheral_driver_guid) {
+ efi_st_error("SPI peripheral lacks driver GUID\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!p->spi_part) {
+ efi_st_error("SPI peripheral lacks SPI part definition\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!p->max_clock_hz) {
+ efi_st_error("SPI peripheral has a max clock rate of zero\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!p->spi_bus) {
+ efi_st_error("SPI peripheral lack pointer to SPI bus\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (p->spi_bus != bus) {
+ efi_st_error("SPI peripheral spi_bus pointer points to the wrong
bus\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!p->chip_select) {
+ efi_st_error("SPI peripheral lacks chip_select function\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!p->spi_part->vendor) {
+ efi_st_error("SPI part lacks vendor string\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!p->spi_part->part_number) {
+ efi_st_error("SPI part lacks part number string\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (p->spi_part->min_clock_hz > p->spi_part->max_clock_hz) {
+ efi_st_error("SPI part min clock rate is greater than max clock
rate\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (p->spi_part->max_clock_hz != p->max_clock_hz) {
+ efi_st_error("SPI part max clock rate does not match peripheral max
clock rate\n");
+ return EFI_ST_FAILURE;
+ }
+
+ ret = boottime->locate_protocol(p->spi_peripheral_driver_guid,
+ NULL, (void **)&io_protocol);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("SPI IO protocol not available\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (io_protocol->spi_peripheral != p) {
+ efi_st_error("SPI IO protocol spi_peripheral pointer points to the
wrong peripheral\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (io_protocol->original_spi_peripheral != p) {
+ efi_st_error("SPI IO protocol original_spi_peripheral pointer points
to the wrong peripheral\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!io_protocol->maximum_transfer_bytes) {
+ efi_st_error("SPI IO protocol has zero maximum transfer
size\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!io_protocol->legacy_spi_protocol) {
+ efi_st_error("SPI IO protocol lacks legacy SPI protocol\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!io_protocol->transaction) {
+ efi_st_error("SPI IO protocol lacks transaction function\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!io_protocol->update_spi_peripheral) {
+ efi_st_error("SPI IO protocol lacks update_spi_peripheral
function\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!io_protocol->legacy_spi_protocol->erase_block_opcode) {
+ efi_st_error("SPI legacy controller protocol lacks
erase_block_opcode function\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!io_protocol->legacy_spi_protocol->write_status_prefix) {
+ efi_st_error("SPI legacy controller protocol lacks
write_status_prefix function\n");
+ return EFI_ST_FAILURE;
+ }
I would have expected that you actually call each of the functions.
+
+ if (!io_protocol->legacy_spi_protocol->bios_base_address) {
+ efi_st_error("SPI legacy controller protocol lacks bios_base_address
function\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!io_protocol->legacy_spi_protocol->clear_spi_protect) {
+ efi_st_error("SPI legacy controller protocol lacks clear_spi_protect
function\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!io_protocol->legacy_spi_protocol->is_range_protected) {
+ efi_st_error("SPI legacy controller protocol lacks
is_range_protected function\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!io_protocol->legacy_spi_protocol->protect_next_range) {
+ efi_st_error("SPI legacy controller protocol lacks
protect_next_range function\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!io_protocol->legacy_spi_protocol->lock_controller) {
+ efi_st_error("SPI legacy controller protocol lacks lock_controller
function\n");
+ return EFI_ST_FAILURE;
+ }
+
+ req[0] = 0x9f;
+ ret = io_protocol->transaction(io_protocol,
+ SPI_TRANSACTION_FULL_DUPLEX,
+ false, 0, 1, 8,
+ sizeof(req), req,
+ sizeof(resp), resp);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("SPI transaction failed\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if ((resp[0] != 0xff) || (resp[1] != 0x20) || (resp[2] != 0x20) ||
(resp[3] != 0x15)) {
+ efi_st_error("Incorrect response from sandbox SPI flash
emulator\n");
+ return EFI_ST_FAILURE;
+ }
+
+ return EFI_ST_SUCCESS;
+}
+
+static int test_bus(struct efi_spi_bus *bus)
+{
+ struct efi_spi_peripheral *p;
+ int status;
+
+ if (!bus->friendly_name) {
+ efi_st_error("SPI bus lacks a friendly name\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!bus->peripheral_list) {
+ efi_st_error("SPI bus has zero peripherals\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!bus->clock) {
+ efi_st_error("SPI bus lacks clock function\n");
+ return EFI_ST_FAILURE;
+ }
+
+ for (p = bus->peripheral_list; p; p = p->next_spi_peripheral) {
+ status = test_peripheral(p, bus);
+ if (status) {
+ efi_st_error("Failed testing SPI peripheral\n");
+ return status;
+ }
+ }
+
+ return EFI_ST_SUCCESS;
+}
+
+static int execute(void)
+{
+ struct efi_spi_configuration_protocol *spi;
+ efi_status_t ret;
+ int status;
+ u32 i;
+
+ ret = boottime->locate_protocol(&efi_spi_configuration_guid,
+ NULL, (void **)&spi);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("SPI configuration protocol not available\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (!spi->bus_count) {
+ efi_st_error("SPI configuration protocol has zero busses\n");
+ return EFI_ST_FAILURE;
+ }
+
+ for (i = 0; i < spi->bus_count; i++) {
+ status = test_bus(spi->bus_list[i]);
+ if (status) {
+ efi_st_error("Failed testing SPI bus %d\n", i);
+ return status;
+ }
+ }
This test does not test anything changing any state of SPI flash. Why is
this patch needed if that is all that is usable?
Best regards
Heinrich
+
+ return EFI_ST_SUCCESS;
+}
+
+EFI_UNIT_TEST(spi_protocol) = {
+ .name = "SPI protocol",
+ .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
+ .setup = setup,
+ .execute = execute,
+};
