On Fri, Jul 15, 2022 at 01:58:24AM +0200, Marek Vasut wrote:
> Commit 44645f87de5 ("mmc: Fix mmc_switch excessive timeout") introduced
> a side effect where CMD13 SEND_STATUS is issued in case mmc_wait_dat0()
> does not return -ENOSYS and $send_status is not set. This happens on all
> hardware which does implement .mmc_wait_dat0 callback, e.g. i.MX8M .
>
> This leads to lengthy timeout before booting OS in case of eMMC in one
> of the HS200/HS400 modes, since the card cannot respond to CMD13 while
> downgrading from HS200/HS400 to regular HS mode.
>
> Fix this by adding the missing conditional.
>
> Fixes: 44645f87de5 ("mmc: Fix mmc_switch excessive timeout")
> Signed-off-by: Marek Vasut <ma...@denx.de>
> Cc: Jaehoon Chung <jh80.ch...@samsung.com>
> Cc: Kirill Kapranov <kirill.kapra...@compulab.co.il>
> Cc: Marek Behún <marek.be...@nic.cz>
> Cc: Pantelis Antoniou <pa...@antoniou-consulting.com>
> Cc: Ye Li <ye...@nxp.com>
> Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com>Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: PGP signature
