The flash_verbose logic is only used by the CFI MTD layer, so if we aren't
using that, disable the logic completely.
Signed-off-by: Mike Frysinger <vap...@gentoo.org>
---
drivers/mtd/cfi_flash.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 39c235e..b05264b 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -63,7 +63,11 @@
*/
static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT };
+#ifdef CONFIG_FLASH_CFI_MTD
static uint flash_verbose = 1;
+#else
+#define flash_verbose 1
+#endif
flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */
@@ -2016,10 +2020,12 @@ ulong flash_get_size (phys_addr_t base, int banknum)
return (info->size);
}
+#ifdef CONFIG_FLASH_CFI_MTD
void flash_set_verbose(uint v)
{
flash_verbose = v;
}
+#endif
/*-----------------------------------------------------------------------
*/
--
1.7.3.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
