On Mon, Jul 4, 2022 at 11:21 AM Cédric Le Goater <c...@kaod.org> wrote: > > On 7/4/22 09:58, Joel Stanley wrote: > > Aspeed BMCs are commonly used with NC-SI. A system indicates the driver > > should configure the link over NC-SI using the device tree. > > > > Add it to the defconfig so we get compile coverage of the driver, even > > if the EVBs do not normally use it. > > > > Signed-off-by: Joel Stanley <j...@jms.id.au> > > Reviewed-by: Cédric Le Goater <c...@kaod.org> > > Thanks, > > C. > > > --- > > configs/evb-ast2500_defconfig | 2 ++ > > configs/evb-ast2600_defconfig | 2 ++ > > 2 files changed, 4 insertions(+) > > > > diff --git a/configs/evb-ast2500_defconfig b/configs/evb-ast2500_defconfig > > index 9d2c4f81c5ad..866732117aa7 100644 > > --- a/configs/evb-ast2500_defconfig > > +++ b/configs/evb-ast2500_defconfig > > @@ -27,6 +27,7 @@ CONFIG_CMD_DHCP=y > > CONFIG_BOOTP_BOOTFILESIZE=y > > CONFIG_CMD_MII=y > > CONFIG_CMD_PING=y > > +CONFIG_CMD_NCSI=y > > CONFIG_ENV_OVERWRITE=y > > CONFIG_SYS_RELOC_GD_ENV_ADDR=y > > CONFIG_NET_RANDOM_ETHADDR=y > > @@ -38,6 +39,7 @@ CONFIG_SYS_I2C_ASPEED=y > > CONFIG_MMC_SDHCI=y > > CONFIG_MMC_SDHCI_ASPEED=y > > CONFIG_PHY_REALTEK=y > > +CONFIG_PHY_NCSI=y > > CONFIG_DM_ETH=y > > CONFIG_FTGMAC100=y > > CONFIG_PHY=y > > diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig > > index 5c4d8426607c..8be22014bb4e 100644 > > --- a/configs/evb-ast2600_defconfig > > +++ b/configs/evb-ast2600_defconfig > > @@ -54,6 +54,7 @@ CONFIG_CMD_DHCP=y > > CONFIG_BOOTP_BOOTFILESIZE=y > > CONFIG_CMD_MII=y > > CONFIG_CMD_PING=y > > +CONFIG_CMD_NCSI=y > > CONFIG_SPL_OF_CONTROL=y > > CONFIG_ENV_OVERWRITE=y > > CONFIG_SYS_RELOC_GD_ENV_ADDR=y > > @@ -73,6 +74,7 @@ CONFIG_MISC=y > > CONFIG_MMC_SDHCI=y > > CONFIG_MMC_SDHCI_ASPEED=y > > CONFIG_PHY_REALTEK=y > > +CONFIG_PHY_NCSI=y > > CONFIG_DM_ETH=y > > CONFIG_DM_MDIO=y > > CONFIG_FTGMAC100=y > Reviewed-by: Ramon Fried <rfried....@gmail.com>
