[PATCH 26/28] ARM: dts: rockchip: rv1126: Add Edgeble AI Edge Compute Module 0 Carrier

[Jagan Teki]

Edge Compute Module 0 Carrier is an industrial form factor evaluation
board from Edgeble AI.

General features:
- microSD slot
- 2x MIPI CSI2 connectors
- MIPI DSI connector
- 2x USB Host
- 1x USB OTG
- Ethernet
- mini PCIe
- Onboard PoE
- RS485, RS232, CAN
- Micro Phone array
- Speaker
- RTC battery slot
- 40-pin expansion

Edge Compute Module 0 needs to mount on top of this Carrier board for
creating Edge Compute Module 0 Carrier platform.

Add support for it.

Signed-off-by: Jagan Teki <ja...@edgeble.ai>
---
 arch/arm/dts/Makefile                        |  3 ++
 arch/arm/dts/rv1126-edgeble-ecm0-carrier.dts | 38 ++++++++++++++++++++
 2 files changed, 41 insertions(+)
 create mode 100644 arch/arm/dts/rv1126-edgeble-ecm0-carrier.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 7fa275ea7c..2070eb1540 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -170,6 +170,9 @@ dtb-$(CONFIG_ROCKCHIP_RV1108) += \
        rv1108-elgin-r1.dtb \
        rv1108-evb.dtb
 
+dtb-$(CONFIG_ROCKCHIP_RV1126) += \
+       rv1126-edgeble-ecm0-carrier.dtb
+
 dtb-$(CONFIG_ARCH_S5P4418) += \
        s5p4418-nanopi2.dtb
 
diff --git a/arch/arm/dts/rv1126-edgeble-ecm0-carrier.dts 
b/arch/arm/dts/rv1126-edgeble-ecm0-carrier.dts
new file mode 100644
index 0000000000..150bfb9bd0
--- /dev/null
+++ b/arch/arm/dts/rv1126-edgeble-ecm0-carrier.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
+ */
+
+/dts-v1/;
+#include "rv1126.dtsi"
+#include "rv1126-edgeble-edge-compute-module-0.dtsi"
+
+/ {
+       model = "Edgeble AI Edge Compute Module 0 Carrier board";
+       compatible = "edgeble,edge-compute-module-0-carrier",
+                    "edgeble,edge-compute-module-0", "rockchip,rv1126";
+
+       chosen {
+               stdout-path = "serial2:1500000n8";
+       };
+};
+
+&sdmmc {
+       bus-width = <4>;
+       cap-mmc-highspeed;
+       cap-sd-highspeed;
+       card-detect-delay = <200>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
+       rockchip,default-sample-phase = <90>;
+       sd-uhs-sdr12;
+       sd-uhs-sdr25;
+       sd-uhs-sdr104;
+       vqmmc-supply = <&vccio_sd>;
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
-- 
2.25.1