On 03.06.22 12:53, Robert Marko wrote:
uDPU like eDPU does not expose SCSI based peripherals like SATA nor PCI
and for sure it does not have the Intel E1000 PCI card.
So, like for eDPU remove those from the defconfig.
Signed-off-by: Robert Marko <robert.ma...@sartura.hr>
Applied to u-boot-marvell/master
Thanks,
Stefan
---
configs/uDPU_defconfig | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/configs/uDPU_defconfig b/configs/uDPU_defconfig
index f7cd1a0589..ec7cda6a29 100644
--- a/configs/uDPU_defconfig
+++ b/configs/uDPU_defconfig
@@ -12,7 +12,6 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-3720-uDPU"
CONFIG_DEBUG_UART_BASE=0xd0012000
CONFIG_SYS_LOAD_ADDR=0x6000000
CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_FIT=y
@@ -33,7 +32,6 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
-CONFIG_CMD_PCI=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
@@ -49,7 +47,6 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ARP_TIMEOUT=200
CONFIG_NET_RETRY_COUNT=50
CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_AHCI_MVEBU=y
CONFIG_CLK=y
CONFIG_CLK_MVEBU=y
CONFIG_DM_I2C=y
@@ -72,17 +69,15 @@ CONFIG_PHYLIB_10G=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_FIXED=y
CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
CONFIG_MVNETA=y
CONFIG_MVMDIO=y
-CONFIG_PCI=y
-CONFIG_PCI_AARDVARK=y
CONFIG_PHY=y
CONFIG_MVEBU_COMPHY_SUPPORT=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_ARMADA_37XX=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
+# CONFIG_SCSI is not set
CONFIG_MVEBU_A3700_UART=y
CONFIG_MVEBU_A3700_SPI=y
CONFIG_SYSINFO=y
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
