Hi Il ven 15 lug 2022, 21:21 Heiko Thiery <heiko.thi...@gmail.com> ha scritto:
> Hi Michael, > > Am Fr., 15. Juli 2022 um 12:21 Uhr schrieb Michael Nazzareno Trimarchi > <mich...@amarulasolutions.com>: > > > > Hi Heiko > > > > On Fri, Jul 15, 2022 at 12:06 PM Heiko Thiery <heiko.thi...@gmail.com> > wrote: > > > > > > Hi Marek > > > > > > Am Fr., 15. Juli 2022 um 11:29 Uhr schrieb Marek Vasut <ma...@denx.de > >: > > > > > > > > On 7/15/22 10:33, Heiko Thiery wrote: > > > > > Hi, > > > > > > > > Hi, > > > > > > > > > I see since the change to CLK_IMX8MQ that the kontron_pitx_imx8m > board > > > > > does not start anymore. I have enabled the DUBUG_UART and see the > > > > > following outputs > > > > > > > > Pick > > > > [PATCH] board_init: Do not reserve MALLOC_F area on stack if non-zero > > > > MALLOC_F_ADDR > > > > > > this does not solve the issue. > > > > > > > > And also, increate SPL_MALLOC_F_LEN in board config if that itself > does > > > > not help. > > > > > > As said, I need to increase SYS_MALLOC_F_LEN to 0xc000. Then the board > > > starts. But Peng said that this is not a valid value due to the > > > OCRAM_S is limited to 32k and this is the MALLOC base. > > > On the other hand, why does my board consums that much memory and the > > > others not. I cannot find any difference in these boards that explains > > > this to me. > > > > When you try to boot from sdcard your memory should be already in ddr. > > So the allocation > > should already be there. > > Maybe I just don't understand it correctly, but isn't it the case that > there is also code in the U-boot that uses malloc before the > relocation takes place? And doesn't this use the memory that has > SYS_MALLOC_F and the size SYS_MALLOC_F_LEN? > > And the flag DM_FLAG_PRE_RELOC which is used e.g. in clk-imx8mq > indicates that this is then in this memory area? > I see it already seen it the flag after suggestion of fabio. Michael > > > Michael > > > > > > > > -- > > > Heiko > > -- > Heiko >
