Hi,
On 7/4/22 07:16, Sughosh Ganu wrote:
Enabling capsule update functionality on the platform requires
populating information on the images that are to be updated using the
functionality. Do so for the DK2 board.
Signed-off-by: Sughosh Ganu <sughosh.g...@linaro.org>
---
Changes since V5: None
board/st/stm32mp1/stm32mp1.c | 19 +++++++++++++++++++
include/configs/stm32mp15_common.h | 4 ++++
2 files changed, 23 insertions(+)
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 07b1a63db7..c6bb7562f6 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -11,6 +11,7 @@
#include <clk.h>
#include <config.h>
#include <dm.h>
+#include <efi_loader.h>
#include <env.h>
#include <env_internal.h>
#include <fdt_simplefb.h>
@@ -92,6 +93,16 @@ DECLARE_GLOBAL_DATA_PTR;
#define USB_START_LOW_THRESHOLD_UV 1230000
#define USB_START_HIGH_THRESHOLD_UV 2150000
+#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
+struct efi_fw_image fw_images[1];
+
+struct efi_capsule_update_info update_info = {
+ .images = fw_images,
+};
+
+u8 num_image_type_guids = ARRAY_SIZE(fw_images);
+#endif /* EFI_HAVE_CAPSULE_SUPPORT */
+
int board_early_init_f(void)
{
/* nothing to do, only used in SPL */
@@ -675,6 +686,14 @@ int board_init(void)
setup_led(LEDST_ON);
+#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
+ if (board_is_dk2()) {
+ efi_guid_t image_type_guid = STM32MP1_DK2_FIP_IMAGE_GUID;
STM32MP15_DK2_FIP_IMAGE_GUID
+ guidcpy(&fw_images[0].image_type_id, &image_type_guid);
+ fw_images[0].fw_name = u"STM32MP1-DK2-FIP";
fw_images[0].fw_name = u"STM32MP15-DK2-FIP";
+ fw_images[0].image_index = 5;
+ }
+#endif
return 0;
}
diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h
index 6b40cdb017..6a1ae9788d 100644
--- a/include/configs/stm32mp15_common.h
+++ b/include/configs/stm32mp15_common.h
@@ -54,6 +54,10 @@
#define CONFIG_SYS_AUTOLOAD "no"
#endif
+#define STM32MP1_DK2_FIP_IMAGE_GUID \
+ EFI_GUID(0x19d5df83, 0x11b0, 0x457b, 0xbe, 0x2c, \
+ 0x75, 0x59, 0xc1, 0x31, 0x42, 0xa5)
+
#define STM32MP15_DK2_FIP_IMAGE_GUID \
/*****************************************************************************/
#ifdef CONFIG_DISTRO_DEFAULTS
/*****************************************************************************/
with the modification s/STM32MP1/STM32MP15/
to avoid confusion with STM32MP13
Reviewed-by: Patrick Delaunay <patrick.delau...@foss.st.com>
Thanks
Patrick
