On 09.07.22 14:43, Tom Rini wrote:
On Sat, Jul 09, 2022 at 02:01:01PM +0200, Daniel Schwierzeck wrote:
Hi Tom,
On 08.07.22 18:50, Tom Rini wrote:
On Fri, Jul 08, 2022 at 05:21:48PM +0200, Daniel SchwierzeckHi Tom, wrote:
Gitlab CI:
https://source.denx.de/u-boot/custodians/u-boot-mips/-/pipelines/12656
Azure:
https://dev.azure.com/danielschwierzeck/u-boot/_build/results?buildId=30&view=results
The following changes since commit 2d2c61ff0460740d9ec5a44dbef9255a8c690696:
Merge tag 'efi-2022-07-rc7' of
https://source.denx.de/u-boot/custodians/u-boot-efi (2022-07-06 09:17:08 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-mips.git/
tags/mips-pull-2022-07-08
for you to fetch changes up to e5fc4022af3cfd59e3459276305671a595ac5ff0:
MAINTAINERS: update maintainer for MediaTek MIPS platform (2022-07-08
15:13:29 +0200)
----------------------------------------------------------------
- MIPS: add drivers and board support for Mediatek MT7621 SoC
OK, we need a few changes here, sorry. There's now migrated CONFIG
symbols, most of which are easy to do and I was about to, and then I saw
this:
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_START_S_PATH "arch/mips/mach-mtmips/mt7621/tpl"
/* .bss will not be used by TPL */
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
#define CONFIG_SPL_BSS_MAX_SIZE 0
#else
#define CONFIG_SPL_START_S_PATH "arch/mips/mach-mtmips/mt7621/spl"
#define CONFIG_SPL_BSS_START_ADDR 0x80140000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SPL_MAX_SIZE 0x30000
#endif
No, you cannot abuse CONFIG_TPL_BUILD to set CONFIG_SPL_foo. Those need
to become CONFIG_TPL_foo, and set appropriately. And then for
[ST]PL_START_S_PATH, you need to set head-$(CONFIG_ARCH_xxx) to the
right file, for SPL/TPL instead.
do you already have patches for converting stuff like
CONFIG_SPL_BSS_START_ADDR prepared? Than I would wait with the pull request
until those patches are applied to mainline and I would adapt the MT7621
patches.
I could also assist with converting CONFIG_SPL_START_S_PATH because that's
only used on MIPS and one ARM board.
See what's in -next already? SPL_BSS_START_ADDR is migrated, but there
were no TPL_BSS_START_ADDR cases. For START_S_PATH, the platform just
needs to be reworked as I suggested above I believe, to achieve the
desired result.
sorry, didn't check the latest updates in -next and the series was too
long on the list ;)
TPL_BSS_START_ADDR shouldn't be necessary because MT7621 doesn't use BSS
in TPL, the defined values where just dummy values.
I rechecked and removed all migrated Kconfig options from mt7621.h and
pushed an update to u-boot-mips/next. Weijie could you verify that? If
all is okay, I'll prepare a new pull request, otherwise please send me a
v7 patch series.
--
- Daniel
