Hi all, Am Mo., 11. Apr. 2022 um 14:29 Uhr schrieb Tom Rini <tr...@konsulko.com>: > > On Mon, Apr 11, 2022 at 05:07:04PM +0800, Peng Fan (OSS) wrote: > > > From: Peng Fan <peng....@nxp.com> > > > > i.MX8MQ use SYS_MALLOC_F_LEN 0x2000, not 0x10000. The OCRAM_S only has > > 32KB memory, use 0x10000 will make SPL not bootable. > > > > Signed-off-by: Peng Fan <peng....@nxp.com> > > Reviewed-by: Michael Trimarchi <mich...@amarulasolutions.com> > > Reviewed-by: Fabio Estevam <feste...@denx.de> > > --- > > Kconfig | 6 ++++-- > > 1 file changed, 4 insertions(+), 2 deletions(-) > > > > diff --git a/Kconfig b/Kconfig > > index 6b1ddfc549e..3e95ec9d7b9 100644 > > --- a/Kconfig > > +++ b/Kconfig > > @@ -251,8 +251,10 @@ config SYS_MALLOC_F_LEN > > default 0x4000 if SANDBOX || RISCV > > default 0x2000 if (ARCH_MX7 || ARCH_MX7ULP || ARCH_MX6 || ARCH_MX5 || > > \ > > ARCH_QEMU || ARCH_SUNXI || ARCH_OWL) > > - default 0x10000 if (ARCH_IMX8 || ARCH_IMX8M || ARCH_LS1012A || \ > > - ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) > > + default 0x10000 if (ARCH_IMX8 || (ARCH_IMX8M && !IMX8MQ) || \ > > + ARCH_LS1012A || ARCH_LS1021A || ARCH_LS1043A || \ > > + ARCH_LS1046A) > > + default 0x2000 if IMX8MQ > > default 0x400 > > help > > Before relocation, memory is very limited on many platforms. Still, > > Note that we can put this with the rest of the 0x2000 default instances. > And as an aside, imx8mq_phanbell_defconfig sets this to 0x4000. That > said, I've applied this to master (with the location change I noted), thanks! > > -- > Tom
I just tested v2022.07-rc6 and noticed that by reducing the value the kontron pitx-imx8m (imx8mq) board does not start anymore. I locally increased the value to 0xc000 and the board works again. So should I increase the value just for this board or should I increase the default value for the IMX8MQ? -- Heiko
