Hi, My board is a Karo tx25 (imx25) and the purpose is to speedup the boot process. For thats reason i tried to change bootloader from Redboot to uboot. but i had some problem when save environment on nand.
When i save the environment variables the first time work but aftre reboot see a badblock. Tanks in advance Davide Doninelli Redboot nand info: RedBoot> nand info Type: Samsung K9F1G08U0A 8-bit 2K page 128MB Total size: 0x08000000 bytes (128 MiB) Total blocks: 0x400 (1024) Block size: 0x20000 (131072) Page size: 0x800 (2048) Spare size: 0x40 (64) Pages per block: 0x40 (64) block 253 at offset 0x01fa0000 is a factory bad block ================================== Found 1 bad block(s) out of 1024 RedBoot> Here some output of prebuilt image for this card: U-Boot 2009.11-00146-g7d259a1-dirty (Jan 07 2010 - 21:05:46) CPU: Freescale i.MX25 at 532 MHz DRAM: 32 MB NAND: 128 MiB No Valid Environment Area Found No Valid Reundant Environment Area Found *** Warning - bad CRC or NAND, using default environment In: serial Out: serial Err: serial tx25_fec_init resetting phy Net: FEC_MXC Hit any key to stop autoboot: 0 => saveenv Saving Environment to NAND... Erasing redundant Nand... Skipping bad block at 0x00080000 Skipping bad block at 0x000a0000 Writing to redundant Nand... FAILED! => nand bad Device 0 bad blocks: 00000000 00020000 00040000 00060000 00080000 000a0000 000c0000 000e0000 01fa0000 07f60000 Here some output of my uboot image for this card standard config: U-Boot 2010.09 (Dec 17 2010 - 14:35:56) CPU: Freescale i.MX25 at 399 MHz DRAM: 32 MiB NAND: 128 MiB *** Warning - bad CRC or NAND, using default environment In: serial Out: serial Err: serial Net: FEC Hit any key to stop autoboot: 0 => saveenv Saving Environment to NAND... Erasing redundant Nand... Erasing at 0x60000 -- 100% complete. Writing to redundant Nand... done => saveenv Saving Environment to NAND... Erasing Nand... Erasing at 0x40000 -- 100% complete. Writing to Nand... done After reset: CPU: Freescale i.MX25 at 399 MHz DRAM: 32 MiB NAND: 128 MiB MXC_NAND: HWECC uncorrectable ECC error in block 2 page 128 subpage 0 No Valid Environment Area Found No Valid Reundant Environment Area Found *** Warning - bad CRC or NAND, using default environment In: serial Out: serial Err: serial Net: FEC Hit any key to stop autoboot: 0 => => saveenv Saving Environment to NAND... Erasing redundant Nand... Skipping bad block at 0x00060000 Writing to redundant Nand... FAILED! => nand bad Device 0 bad blocks: 00000000 00060000 00140000 00160000 01fa0000 07fc0000 07fe0000 => _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
