Hello!
On Thursday 30 June 2022 08:46:59 Alexander Dahl wrote:
> Hello,
>
> Am Mittwoch, 29. Juni 2022, 15:55:27 CEST schrieb Pali Rohár:
> > Hello!
> >
> > On Wednesday 29 June 2022 15:36:57 Alexander Dahl wrote:
> > > Hello Pali,
> > >
> > > had a look at this patch, and have some questions. See below.
> > >
> > > Am Dienstag, 31. Mai 2022, 10:32:36 CEST schrieb Pali Rohár:
> > > > Fix multiple issues in ubifs distroboot code:
> > > >
> > > > U-Boot supports attaching only one MTD device as UBI at the time. So
> > > > always call 'ubifsmount ubi0:${bootubivol}' for mounting UBI volume
> > > > ${bootubivol}. Usage of 'ubi${devnum}' is incorrect as 'ubi part'
> > > > command attach MTD device always as UBI device ubi0.
> > >
> > > Agreed.
> > >
> > > > Set distroboot ${bootfstype} variable to ubifs in ubifs_boot command.
> > > > Distroboot scripts require ${bootfstype} variable to be properly set and
> > > > it
> > > > is already set for all other boot types.
> > >
> > > From grepping through u-boot source, I can not quite follow. Where is
> > > that
> > > variable set and where is it used?
> >
> > For non-ubifs boot targets, env variable ${bootfstype} is set by
> > scan_dev_for_boot_part shell fragment. Then it calls user boot script
> > which can use ${bootfstype} variable. In most cases it is used for
> > constructing cmdline for kernel, mainly as "roofstype=${bootfstype}".
>
> So this is no variable stored in env, but used in scripts only, right?
Filesystem type is stored in (temporary) env variable ${bootfstype},
filled by u-boot env fragment ${scan_dev_for_boot_part}. But seems that
${bootfstype} is not used by u-boot.
> Especially in scripts not part of U-Boot itself? Maybe this should be
> documented somewhere then?
Yea, I agree, something which could be documented.
> > > > Set distroboot ${distro_bootpart} variable to ${bootubivol} value. UBI
> > > > device does not have partitions, but has volumes. Distroboot scripts
> > > > require something to be set in ${distro_bootpart} variable, so set it to
> > > > the UBI volume which is currently mounted by ubifs.
> > > >
> > > > Set distroboot ${devnum} variable to fixed string "ubi0". ubifs code
> > > > differs from the other partition code that it requires "ubi" prefix
> > > > before
> > > > number.
> > >
> > > Okay.
> > >
> > > > Explicitly unmount ubifs volume after loading all data from it. This
> > > > allows
> > > > to detach UBI device from MTD device.
> > >
> > > Okay.
> > >
> > > > Move definition of MTD device with UBI and UBI volume with ubifs
> > > > filesystem
> > > > from global env variables ${bootubipart} and ${bootubivol} into the
> > > > distroboot "func" macro, defined in board include config files. UBIFS
> > > > distroboot macros then set ${bootubipart} and ${bootubivol} local
> > > > variables
> > > > for compatibility with existing distroboot scripts.
> > >
> > > This might be problematic. For a downstream board we use the 'bootubivol'
> > > env variable to switch between different volumes for update purposes.
> > > Means on firmware update we modify U-Boot environment from Linux
> > > (fw_setenv) after successfully updating the inactive volume.
> >
> > Interesting... I even did not thought about such use case as it is not
> > possible to do it with other boot filesystems.
>
> Well yes, it's somewhat of a hack, but it uses existing distroboot
> infrastructure. We did comparable switching of volumes for active rootfs
> without distroboot before. On newer targets we use distroboot together with
> RAUC and have one fix separate boot volume containing the boot script (the
> boot script is not part of those rootfs[01] anymore), which handles loading
> one or the other rootfs, no need to alter bootubivol anymore, it's constant.
>
> > > > This last change allows to define more UBIFS target devices and make it
> > > > clear what is boot MTD/UBI device.
> > >
> > > How would one switch the default UBI volume to be booted from then?
> >
> > With this my change, it is probably not easily possible. One option is
> > to define more boot targets, e.g.:
> >
> > func(UBIFS, ubifs, 0, UBI, volume0)
> > func(UBIFS, ubifs, 1, UBI, volume1)
> >
> > And then change env ${boottargets} from ubifs0 to ubifs1, which can be
> > done via fs_setenv.
>
> This should work, yes. Maybe it's a little more complicated than this, e.g.
> switching
> from 'mmc0 ubifs0' to 'mmc0 ubifs1'
> or
> from 'ubifs0 ubifs1' to 'ubifs1 ubifs0'
> but that's board dependent and no big deal in general I guess.
Ok.
> > As with this change is finally possible to specify more ubifs targets
> > in BOOT_TARGET_DEVICES() u-boot macro.
> >
> > This would be same as switching between other u-boot distroboot targets.
>
> Makes sense.
>
> >
> > ...
> >
> > But I can understand that you want to have this (probably undocumented)
> > behavior of switching UBI volume via env variable ${bootubivol}.
> >
> > So what about allowing both configuration in U-Boot, with stored boot
> > volume in ENV and with hardcoded boot volume in config file?
>
> Just had another look at how 'bootcmd_ubifs0' is set with your patch, and I
> think with switching 'boot_targets' instead of 'bootubivol' it should work
> (not tested). Only problem would be a migration strategy for old boards or a
> more sophisticated logic in Linux to determine what env variable has to be
> updated, but don't let that be your concern.
Note that until you reset env variables to default, u-boot will
continue using "old" style and because all logic is stored only in env
(not in u-boot runtime code itself), there should be no issue with
upgrading u-boot to new version which uses ubifs0 and ubifs1.
Anyway, does it mean that we need to extend this patch to allow still
storing/updating ubi boot volume in env file?
> > And which / how many boards use this functionality?
>
> Seriously, I have no idea. You never know what all those downstream users
> do,
> especially in this case where functionality is in a boot script not part of U-
> Boot itself. Maybe I'm the only one using it like this, maybe not. As of
> today I would recommend to use some update framework like RAUC anyways.
I think boards which you maintain or use.
> Greets
> Alex
>
> >
> > > Greets
> > > Alex
> > >
> > > > All board include config files are adjusted to use this new scheme of
> > > > specifying boot MTD/UBI device.
> > > >
> > > > Signed-off-by: Pali Rohár <p...@kernel.org>
> > > > ---
> > > > CI test passed on https://github.com/u-boot/u-boot/pull/179
> > > > ---
> > > >
> > > > include/config_distro_bootcmd.h | 27 ++++++++++++++++-----------
> > > > include/configs/am335x_guardian.h | 3 +--
> > > > include/configs/colibri-imx6ull.h | 1 -
> > > > include/configs/colibri_imx7.h | 1 -
> > > > include/configs/kontron-sl-mx6ul.h | 2 +-
> > > > include/configs/mys_6ulx.h | 2 +-
> > > > include/configs/npi_imx6ull.h | 2 +-
> > > > include/configs/omap3_beagle.h | 4 +---
> > > > include/configs/omap3_evm.h | 4 +---
> > > > include/configs/pcl063.h | 2 +-
> > > > include/configs/stm32mp15_common.h | 2 +-
> > > > include/configs/uniphier.h | 2 +-
> > > > 12 files changed, 25 insertions(+), 27 deletions(-)
> > > >
> > > > diff --git a/include/config_distro_bootcmd.h
> > > > b/include/config_distro_bootcmd.h index c55023889cab..c6e9c497413d
> > > > 100644
> > > > --- a/include/config_distro_bootcmd.h
> > > > +++ b/include/config_distro_bootcmd.h
> > > > @@ -70,18 +70,23 @@
> > > >
> > > > #ifdef CONFIG_CMD_UBIFS
> > > > #define BOOTENV_SHARED_UBIFS \
> > > >
> > > > "ubifs_boot=" \
> > > >
> > > > - "env exists bootubipart || " \
> > > > - "env set bootubipart UBI; " \
> > > > - "env exists bootubivol || " \
> > > > - "env set bootubivol boot; " \
> > > >
> > > > "if ubi part ${bootubipart} && " \
> > > >
> > > > - "ubifsmount ubi${devnum}:${bootubivol}; " \
> > > > + "ubifsmount ubi0:${bootubivol}; " \
> > > >
> > > > "then " \
> > > >
> > > > "devtype=ubi; " \
> > > >
> > > > + "devnum=ubi0; " \
> > > > + "bootfstype=ubifs; " \
> > > > + "distro_bootpart=${bootubivol}; " \
> > > >
> > > > "run scan_dev_for_boot; " \
> > > >
> > > > + "ubifsumount; " \
> > > >
> > > > "fi\0"
> > > >
> > > > -#define BOOTENV_DEV_UBIFS BOOTENV_DEV_BLKDEV
> > > > -#define BOOTENV_DEV_NAME_UBIFS BOOTENV_DEV_NAME_BLKDEV
> > > > +#define BOOTENV_DEV_UBIFS(devtypeu, devtypel, instance, bootubipart,
> > > > bootubivol) \ + "bootcmd_ubifs" #instance "=" \
> > > > + "bootubipart=" #bootubipart "; " \
> > > > + "bootubivol=" #bootubivol "; " \
> > > > + "run ubifs_boot\0"
> > > > +#define BOOTENV_DEV_NAME_UBIFS(devtypeu, devtypel, instance,
> > > > bootubipart,
> > > > bootubivol) \ + #devtypel #instance " "
> > > >
> > > > #else
> > > > #define BOOTENV_SHARED_UBIFS
> > > > #define BOOTENV_DEV_UBIFS \
> > > >
> > > > @@ -411,13 +416,13 @@
> > > >
> > > >
> > > > BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE
> > > >
> > > > #endif
> > > >
> > > > -#define BOOTENV_DEV_NAME(devtypeu, devtypel, instance) \
> > > > - BOOTENV_DEV_NAME_##devtypeu(devtypeu, devtypel, instance)
> > > > +#define BOOTENV_DEV_NAME(devtypeu, devtypel, instance, ...) \
> > > > + BOOTENV_DEV_NAME_##devtypeu(devtypeu, devtypel, instance, ##
> > > > __VA_ARGS__)
> > > >
> > > > #define BOOTENV_BOOT_TARGETS \
> > > >
> > > > "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0"
> > > >
> > > > -#define BOOTENV_DEV(devtypeu, devtypel, instance) \
> > > > - BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance)
> > > > +#define BOOTENV_DEV(devtypeu, devtypel, instance, ...) \
> > > > + BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance, ##
> > > > __VA_ARGS__)
> > > >
> > > > #define BOOTENV \
> > > >
> > > > BOOTENV_SHARED_HOST \
> > > > BOOTENV_SHARED_MMC \
> > > >
> > > > diff --git a/include/configs/am335x_guardian.h
> > > > b/include/configs/am335x_guardian.h index b92703205cde..340715dad5c6
> > > > 100644
> > > > --- a/include/configs/am335x_guardian.h
> > > > +++ b/include/configs/am335x_guardian.h
> > > > @@ -29,7 +29,7 @@
> > > >
> > > > "ramdisk_addr_r=0x88080000\0" \
> > > >
> > > > #define BOOT_TARGET_DEVICES(func) \
> > > >
> > > > - func(UBIFS, ubifs, 0)
> > > > + func(UBIFS, ubifs, 0, UBI, rootfs)
> > > >
> > > > #define AM335XX_BOARD_FDTFILE "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE
> > > >
> > > > ".dtb\0"
> > > >
> > > > @@ -54,7 +54,6 @@
> > > >
> > > > GUARDIAN_DEFAULT_PROD_ENV \
> > > > "autoload=no\0" \
> > > > "backlight_brightness=50\0" \
> > > >
> > > > - "bootubivol=rootfs\0" \
> > > >
> > > > "distro_bootcmd=" \
> > > >
> > > > "setenv rootflags \"bulk_read,chk_data_crc\"; " \
> > > > "setenv ethact usb_ether; " \
> > > >
> > > > diff --git a/include/configs/colibri-imx6ull.h
> > > > b/include/configs/colibri-imx6ull.h index 9e5212acb2ee..a0a0e1767fe0
> > > > 100644
> > > > --- a/include/configs/colibri-imx6ull.h
> > > > +++ b/include/configs/colibri-imx6ull.h
> > > > @@ -91,7 +91,6 @@
> > > >
> > > > UBI_BOOTCMD \
> > > > UBOOT_UPDATE \
> > > > "boot_script_dhcp=boot.scr\0" \
> > > >
> > > > - "bootubipart=ubi\0" \
> > > >
> > > > "console=ttymxc0\0" \
> > > > "defargs=user_debug=30\0" \
> > > > "fdt_board=eval-v3\0" \
> > > >
> > > > diff --git a/include/configs/colibri_imx7.h
> > > > b/include/configs/colibri_imx7.h index 3dba7bcef258..3cad17777975
> > > > 100644
> > > > --- a/include/configs/colibri_imx7.h
> > > > +++ b/include/configs/colibri_imx7.h
> > > > @@ -131,7 +131,6 @@
> > > >
> > > > UBOOT_UPDATE \
> > > > "boot_file=zImage\0" \
> > > > "boot_script_dhcp=boot.scr\0" \
> > > >
> > > > - "bootubipart=ubi\0" \
> > > >
> > > > "console=ttymxc0\0" \
> > > > "defargs=\0" \
> > > > "fdt_board=eval-v3\0" \
> > > >
> > > > diff --git a/include/configs/kontron-sl-mx6ul.h
> > > > b/include/configs/kontron-sl-mx6ul.h index 7bc402d578e8..b4808d2bbf75
> > > > 100644
> > > > --- a/include/configs/kontron-sl-mx6ul.h
> > > > +++ b/include/configs/kontron-sl-mx6ul.h
> > > > @@ -45,7 +45,7 @@
> > > >
> > > > #define BOOT_TARGET_DEVICES(func) \
> > > >
> > > > func(MMC, mmc, 1) \
> > > > func(MMC, mmc, 0) \
> > > >
> > > > - func(UBIFS, ubifs, 0) \
> > > > + func(UBIFS, ubifs, 0, UBI, boot) \
> > > >
> > > > func(USB, usb, 0) \
> > > > func(PXE, pxe, na) \
> > > > func(DHCP, dhcp, na)
> > > >
> > > > diff --git a/include/configs/mys_6ulx.h b/include/configs/mys_6ulx.h
> > > > index 6801fc109eae..663820177a3e 100644
> > > > --- a/include/configs/mys_6ulx.h
> > > > +++ b/include/configs/mys_6ulx.h
> > > > @@ -59,7 +59,7 @@
> > > >
> > > > #define BOOT_TARGET_DEVICES(func) \
> > > >
> > > > func(MMC, mmc, 0) \
> > > >
> > > > - func(UBIFS, ubifs, 0) \
> > > > + func(UBIFS, ubifs, 0, UBI, boot) \
> > > >
> > > > func(PXE, pxe, na) \
> > > > func(DHCP, dhcp, na)
> > > >
> > > > diff --git a/include/configs/npi_imx6ull.h
> > > > b/include/configs/npi_imx6ull.h
> > > > index c250fa650603..ebb887544e08 100644
> > > > --- a/include/configs/npi_imx6ull.h
> > > > +++ b/include/configs/npi_imx6ull.h
> > > > @@ -67,7 +67,7 @@
> > > >
> > > > #define BOOT_TARGET_DEVICES(func) \
> > > >
> > > > func(MMC, mmc, 0) \
> > > >
> > > > - func(UBIFS, ubifs, 0) \
> > > > + func(UBIFS, ubifs, 0, UBI, boot) \
> > > >
> > > > func(PXE, pxe, na) \
> > > > func(DHCP, dhcp, na)
> > > >
> > > > diff --git a/include/configs/omap3_beagle.h
> > > > b/include/configs/omap3_beagle.h index 158773acedb9..f5da08cf3359
> > > > 100644
> > > > --- a/include/configs/omap3_beagle.h
> > > > +++ b/include/configs/omap3_beagle.h
> > > > @@ -65,7 +65,7 @@
> > > >
> > > > #define BOOT_TARGET_DEVICES(func) \
> > > >
> > > > func(MMC, mmc, 0) \
> > > > func(LEGACY_MMC, legacy_mmc, 0) \
> > > >
> > > > - func(UBIFS, ubifs, 0) \
> > > > + func(UBIFS, ubifs, 0, rootfs, rootfs) \
> > > >
> > > > func(NAND, nand, 0)
> > > >
> > > > #else /* !CONFIG_MTD_RAW_NAND */
> > > >
> > > > @@ -87,8 +87,6 @@
> > > >
> > > > "bootenv=uEnv.txt\0" \
> > > > "bootfile=zImage\0" \
> > > > "bootpart=0:2\0" \
> > > >
> > > > - "bootubivol=rootfs\0" \
> > > > - "bootubipart=rootfs\0" \
> > > >
> > > > "usbtty=cdc_acm\0" \
> > > > "mpurate=auto\0" \
> > > > "buddy=none\0" \
> > > >
> > > > diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
> > > > index eeb9ef8c741a..cc98e03096ab 100644
> > > > --- a/include/configs/omap3_evm.h
> > > > +++ b/include/configs/omap3_evm.h
> > > > @@ -60,7 +60,7 @@
> > > >
> > > > #define BOOT_TARGET_DEVICES(func) \
> > > >
> > > > func(MMC, mmc, 0) \
> > > > func(LEGACY_MMC, legacy_mmc, 0) \
> > > >
> > > > - func(UBIFS, ubifs, 0) \
> > > > + func(UBIFS, ubifs, 0, rootfs, rootfs) \
> > > >
> > > > func(NAND, nand, 0)
> > > >
> > > > #else /* !CONFIG_MTD_RAW_NAND */
> > > >
> > > > @@ -88,8 +88,6 @@
> > > >
> > > > "bootenv=uEnv.txt\0" \
> > > > "bootfile=zImage\0" \
> > > > "bootpart=0:2\0" \
> > > >
> > > > - "bootubivol=rootfs\0" \
> > > > - "bootubipart=rootfs\0" \
> > > >
> > > > "optargs=\0" \
> > > > "nandroot=ubi0:rootfs ubi.mtd=rootfs rw noinitrd\0" \
> > > > "nandrootfstype=ubifs rootwait\0" \
> > > >
> > > > diff --git a/include/configs/pcl063.h b/include/configs/pcl063.h
> > > > index 31b7d07a24cd..c3f7e7eb2c4b 100644
> > > > --- a/include/configs/pcl063.h
> > > > +++ b/include/configs/pcl063.h
> > > > @@ -71,7 +71,7 @@
> > > >
> > > > #define BOOT_TARGET_DEVICES(func) \
> > > >
> > > > func(MMC, mmc, 0) \
> > > >
> > > > - func(UBIFS, ubifs, 0) \
> > > > + func(UBIFS, ubifs, 0, UBI, boot) \
> > > >
> > > > func(PXE, pxe, na) \
> > > > func(DHCP, dhcp, na)
> > > >
> > > > diff --git a/include/configs/stm32mp15_common.h
> > > > b/include/configs/stm32mp15_common.h index 6b40cdb01779..68ea56e69c98
> > > > 100644
> > > > --- a/include/configs/stm32mp15_common.h
> > > > +++ b/include/configs/stm32mp15_common.h
> > > > @@ -77,7 +77,7 @@
> > > >
> > > > #endif
> > > >
> > > > #ifdef CONFIG_CMD_UBIFS
> > > >
> > > > -#define BOOT_TARGET_UBIFS(func) func(UBIFS, ubifs, 0)
> > > > +#define BOOT_TARGET_UBIFS(func) func(UBIFS, ubifs, 0, UBI, boot)
> > > >
> > > > #else
> > > > #define BOOT_TARGET_UBIFS(func)
> > > > #endif
> > > >
> > > > diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
> > > > index f813f88cdd7a..640a29067d85 100644
> > > > --- a/include/configs/uniphier.h
> > > > +++ b/include/configs/uniphier.h
> > > > @@ -20,7 +20,7 @@
> > > >
> > > > #endif
> > > >
> > > > #ifdef CONFIG_CMD_UBIFS
> > > >
> > > > -#define BOOT_TARGET_DEVICE_UBIFS(func) func(UBIFS, ubifs, 0)
> > > > +#define BOOT_TARGET_DEVICE_UBIFS(func) func(UBIFS, ubifs, 0, UBI,
> boot)
> > > >
> > > > #else
> > > > #define BOOT_TARGET_DEVICE_UBIFS(func)
> > > > #endif
>
>
>
>
>
