On Friday 26 November 2010 19:17:40 Stefan Roese wrote: > This patch changes the PPC4xx ethernet POST loop test count from > currently 192 (256 - 64) to a default of 10. While doing this the max > frame size is increased. Each loop run uses a different frame size, > starting with a max of 1514 bytes, down to 64. The default loop > count of 10 can be overriden using CONFIG_SYS_POST_ETH_LOOPS in the > board config header. > > The TEST_NUM loop has been removed as it was never used. > > The main reason for this change is to reduce the boot time on boards > using this POST test, like the lwmon5 board. This change reduces the > boot time by about 600ms on the lwmon5 board.
Applied to u-boot-ppc4xx/next. Thanks. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot