[PATCH sunxi/next] spi: sunxi: use XCH status to detect in-progress transfer

[Icenowy Zheng]

The current detection of RX FIFO depth seems to be not reliable, and
XCH will self-clear when a transfer is done.

Check XCH bit when polling for transfer finish.

Signed-off-by: Icenowy Zheng <u...@icenowy.me>
---
 drivers/spi/spi-sunxi.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-sunxi.c b/drivers/spi/spi-sunxi.c
index 2f33337725..a424c6a98e 100644
--- a/drivers/spi/spi-sunxi.c
+++ b/drivers/spi/spi-sunxi.c
@@ -83,7 +83,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #endif
 #define SUN4I_SPI_MIN_RATE             3000
 #define SUN4I_SPI_DEFAULT_RATE         1000000
-#define SUN4I_SPI_TIMEOUT_US           1000000
+#define SUN4I_SPI_TIMEOUT_MS           1000
 
 #define SPI_REG(priv, reg)             ((priv)->base + \
                                        (priv)->variant->regs[reg])
@@ -326,7 +326,6 @@ static int sun4i_spi_xfer(struct udevice *dev, unsigned int 
bitlen,
        struct dm_spi_slave_plat *slave_plat = dev_get_parent_plat(dev);
 
        u32 len = bitlen / 8;
-       u32 rx_fifocnt;
        u8 nbytes;
        int ret;
 
@@ -364,13 +363,10 @@ static int sun4i_spi_xfer(struct udevice *dev, unsigned 
int bitlen,
                setbits_le32(SPI_REG(priv, SPI_TCR),
                             SPI_BIT(priv, SPI_TCR_XCH));
 
-               /* Wait till RX FIFO to be empty */
-               ret = readl_poll_timeout(SPI_REG(priv, SPI_FSR),
-                                        rx_fifocnt,
-                                        (((rx_fifocnt &
-                                        SPI_BIT(priv, SPI_FSR_RF_CNT_MASK)) >>
-                                        SUN4I_FIFO_STA_RF_CNT_BITS) >= nbytes),
-                                        SUN4I_SPI_TIMEOUT_US);
+               /* Wait for the transfer to be done */
+               ret = wait_for_bit_le32((const void *)SPI_REG(priv, SPI_TCR),
+                                       SPI_BIT(priv, SPI_TCR_XCH),
+                                       false, SUN4I_SPI_TIMEOUT_MS, false);
                if (ret < 0) {
                        printf("ERROR: sun4i_spi: Timeout transferring data\n");
                        sun4i_spi_set_cs(bus, slave_plat->cs, false);
-- 
2.36.0