The tests on CONFIG_DM_REGULATOR, added to avoid compilation issues, can
now be removed, they are no more needed since the commit 16cc5ad0b439
("power: regulator: add dummy helper").
Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com>
---
board/st/stm32mp1/stm32mp1.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c
index 9496890d164..8c162b42a59 100644
--- a/board/st/stm32mp1/stm32mp1.c
+++ b/board/st/stm32mp1/stm32mp1.c
@@ -494,7 +494,7 @@ static void sysconf_init(void)
ret = uclass_get_device_by_driver(UCLASS_PMIC,
DM_DRIVER_GET(stm32mp_pwr_pmic),
&pwr_dev);
- if (!ret && IS_ENABLED(CONFIG_DM_REGULATOR)) {
+ if (!ret) {
ret = uclass_get_device_by_driver(UCLASS_MISC,
DM_DRIVER_GET(stm32mp_bsec),
&dev);
@@ -555,9 +555,6 @@ static int board_stm32mp15x_dk2_init(void)
struct gpio_desc hdmi, audio;
int ret = 0;
- if (!IS_ENABLED(CONFIG_DM_REGULATOR))
- return -ENODEV;
-
/* Fix to make I2C1 usable on DK2 for touchscreen usage in kernel */
node = ofnode_path("/soc/i2c@40012000/hdmi-transmitter@39");
if (!ofnode_valid(node)) {
@@ -658,8 +655,7 @@ int board_init(void)
if (board_is_stm32mp15x_dk2())
board_stm32mp15x_dk2_init();
- if (IS_ENABLED(CONFIG_DM_REGULATOR))
- regulators_enable_boot_on(_DEBUG);
+ regulators_enable_boot_on(_DEBUG);
/*
* sysconf initialisation done only when U-Boot is running in secure
--
2.25.1
