In order not to repeat the IMX8MN || IMX8MP || IMX8ULP logic in
multiple places where we need to know if the SOC exposes the ROM API,
add a "def_bool y" Kconfig symbol.
Reviewed-by: Peng Fan <peng....@nxp.com>
Signed-off-by: Rasmus Villemoes <rasmus.villem...@prevas.dk>
---
arch/arm/mach-imx/Kconfig | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ad0fb36502..50f4c08ea3 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -164,9 +164,13 @@ config DDRMC_VF610_CALIBRATION
shall perform it on a new PCB and then use those values to program
the ddrmc_cr_setting on relevant board file.
+config IMX8_ROMAPI
+ def_bool y
+ depends on IMX8MN || IMX8MP || IMX8ULP
+
config SPL_IMX_ROMAPI_LOADADDR
hex "Default load address to load image through ROM API"
- depends on IMX8MN || IMX8MP || IMX8ULP
+ depends on IMX8_ROMAPI
config IMX_DCD_ADDR
hex "DCD Blocks location on the image"
--
2.31.1
