On Dec 15, 2010, at 5:25 PM, Paul Gortmaker wrote: > On Mon, Dec 13, 2010 at 9:12 PM, Paul Gortmaker > <paul.gortma...@windriver.com> wrote: >> >> I'm not anywhere near the office at the moment, but later in the week >> I'll see if I can find a board (or two?) to test on. >> >> Paul. > > Seems OK for POST test on an old MPC8540ADS. The info printed > for SDRAM kind of interjects itself into the DRAM info, but that is lar > gely cosmetic.
I'll look at making this prettier.... I like pretty. > > Testing details of the base commit I used to "am" your patches to are > below. Feel free to add a Tested-by: from me if you want. Thanks! -Becky > > P. > -------------------------------------- > => reset > > > U-Boot 2010.12-rc1-00038-g04af960 (Dec 15 2010 - 18:09:59) > > CPU: 8540, Version: 2.0, (0x80300020) > Core: Unknown, Version: 2.0, (0x80200020) > Clock Configuration: > CPU0:825 MHz, > CCB:330 MHz, > DDR:165 MHz (330 MT/s data rate), LBC:82.500 MHz > L1: D-cache 32 kB enabled > I-cache 32 kB enabled > Board: ADS > PCI1: 32 bit, 33 MHz (compiled) > I2C: ready > DRAM: SDRAM: 64 MiB > 256 MiB (DDR1, 64-bit, CL=2.5, ECC off) > FLASH: 16 MiB > L2: 256 KB already enabled > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > Net: TSEC0, TSEC1, FEC > Hit any key to stop autoboot: 0 > => > > -------------------- > > u-boot$git merge-base master HEAD > 0c0892be0d93a5a892b93739c5eb3bf692fed4ff > u-boot$git describe > v2010.12-rc1-38-g04af960 > u-boot$git request-pull master . > The following changes since commit 0c0892be0d93a5a892b93739c5eb3bf692fed4ff: > > Merge branch 'master' of git://git.denx.de/u-boot-marvell > (2010-10-29 22:03:00 +0200) > > are available in the git repository at: > > . bb-dram > > Becky Bruce (12): > mpc8540eval: Split initdram() into initdram() and sdram_init() > tqm85xx: create fixed_sdram() to do sdram setup > mpc85xx/tlb.c: Allow platforms to specify wimge bits > socrates: rename sdram_setup fixed_sdram() > mpc8569mds: Remove unnecessary CONFIG_SYS_LBC_SDRAM_BASE definition > PM854: rename CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_BASE > PM856: Rename CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_BASE > MPC8568/MPC8569: Remove CONFIG_DDR_DLL define > mpc85xx boards: initdram() cleanup/bugfix > 85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN > mpc85xx: rename sdram_init() lbc_sdram_init() > MPC8xxx DDR: align informational prints _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
