From: Peng Fan <peng....@nxp.com> For SoCs support ROM API, CONFIG_SPL_BOOTROM_SUPPORT is needed, so use this macro to guard the code to avoid extend the list.
And drop the guard with structure definition, there is no need. Signed-off-by: Peng Fan <peng....@nxp.com> --- arch/arm/include/asm/mach-imx/sys_proto.h | 2 -- arch/arm/mach-imx/Kconfig | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h index fdbbfb169cb..fc5e5c66aad 100644 --- a/arch/arm/include/asm/mach-imx/sys_proto.h +++ b/arch/arm/include/asm/mach-imx/sys_proto.h @@ -146,7 +146,6 @@ struct rproc_att { u32 size; /* size of reg range */ }; -#if defined(CONFIG_IMX8M) || defined(CONFIG_IMX8ULP) struct rom_api { u16 ver; u16 tag; @@ -178,7 +177,6 @@ enum boot_dev_type_e { #define ROM_API_OKAY 0xF0 extern struct rom_api *g_rom_api; -#endif /* For i.MX ULP */ #define BT0CFG_LPBOOT_MASK 0x1 diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ad0fb365023..b621269d648 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -166,7 +166,7 @@ config DDRMC_VF610_CALIBRATION config SPL_IMX_ROMAPI_LOADADDR hex "Default load address to load image through ROM API" - depends on IMX8MN || IMX8MP || IMX8ULP + depends on SPL_BOOTROM_SUPPORT config IMX_DCD_ADDR hex "DCD Blocks location on the image" -- 2.36.0