On Dec 9, 2010, at 9:52 AM, Kumar Gala wrote: > The following commit: > > commit 46e91674fb4b6d06c6a4984c0b5ac7d9a16923f4 > Author: Peter Tyser <pty...@xes-inc.com> > Date: Tue Nov 3 17:52:07 2009 -0600 > > tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode > > Removed setting Auto-Neg by default, however this is believed to be > proper default configuration for initialization of the TBI interface. > > Instead we explicitly set CONFIG_TSEC_TBICR_SETTINGS for the > XPedite5370 & XPedite5500 boards that use a Broadcomm PHY which require > Auto-Neg to be disabled to function properly. > > This addresses a breakage on the P2020 DS & MPC8572 DS boards when used > with an SGMII riser card. We also remove setting > CONFIG_TSEC_TBICR_SETTINGS on the P1_P2_RDB family of boards as now the > default setting is sufficient for them. > > Additionally, we clean up the code a bit to remove an unnecessary second > define. > > Signed-off-by: Kumar Gala <ga...@kernel.crashing.org> > Acked-by: Peter Tyser <pty...@xes-inc.com> > Tested-by: Peter Tyser <pty...@xes-inc.com> > --- > * Added comments per Peter T's request > > drivers/net/tsec.c | 9 ++++----- > include/configs/P1_P2_RDB.h | 8 -------- > include/configs/xpedite537x.h | 10 ++++++++++ > include/configs/xpedite550x.h | 10 ++++++++++ > 4 files changed, 24 insertions(+), 13 deletions(-)
applied to 85xx - k _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot