On Mon, May 23, 2022 at 4:58 AM Peng Fan (OSS) <peng....@oss.nxp.com> wrote: > > From: Peng Fan <peng....@nxp.com> > > Enable CONFIG_SPL_DM_SERIAL. uart2 and its pinmux was already > marked with u-boot,dm-spl. > Move preloader_console_init after spl_early_init to make sure driver > model work. > > Signed-off-by: Peng Fan <peng....@nxp.com> > Acked-by: Tim Harvey <thar...@gateworks.com> > Reviewed-by: Fabio Estevam <feste...@denx.de> > --- > include/configs/imx8mm_venice.h | 3 --- > include/configs/imx8mn_venice.h | 3 --- > include/configs/imx8mp_venice.h | 3 --- > 3 files changed, 9 deletions(-) > > diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h > index 9836d5b73ca..90e8941a254 100644 > --- a/include/configs/imx8mm_venice.h > +++ b/include/configs/imx8mm_venice.h > @@ -101,9 +101,6 @@ > #define PHYS_SDRAM_SIZE SZ_4G > #define CONFIG_SYS_BOOTM_LEN SZ_256M > > -/* UART */ > -#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2) > - > /* Monitor Command Prompt */ > #define CONFIG_SYS_CBSIZE SZ_2K > #define CONFIG_SYS_MAXARGS 64 > diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h > index 3cbe11a9035..6555dd4349c 100644 > --- a/include/configs/imx8mn_venice.h > +++ b/include/configs/imx8mn_venice.h > @@ -97,9 +97,6 @@ > #define PHYS_SDRAM_SIZE SZ_4G > #define CONFIG_SYS_BOOTM_LEN SZ_256M > > -/* UART */ > -#define CONFIG_MXC_UART_BASE UART_BASE_ADDR(2) > - > /* Monitor Command Prompt */ > #define CONFIG_SYS_CBSIZE SZ_2K > #define CONFIG_SYS_MAXARGS 64 > diff --git a/include/configs/imx8mp_venice.h b/include/configs/imx8mp_venice.h > index 4120e4cc6ba..c09a1b4572a 100644 > --- a/include/configs/imx8mp_venice.h > +++ b/include/configs/imx8mp_venice.h > @@ -97,9 +97,6 @@ > #define PHYS_SDRAM_SIZE SZ_4G > #define CONFIG_SYS_BOOTM_LEN SZ_256M > > -/* UART */ > -#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR > - > /* Monitor Command Prompt */ > #define CONFIG_SYS_CBSIZE SZ_2K > #define CONFIG_SYS_MAXARGS 64 > -- > 2.36.0 >
Thanks Peng, Tested-By: Tim Harvey <thar...@gateworks.com> Best Regards, Tim
