From: Peng Fan <peng....@nxp.com> Some SPL definitions could be generalized, so use imx8m.h for iMX8MP.
Tested-by: Tim Harvey <thar...@gateworks.com> #imx8mp-venice-* Signed-off-by: Peng Fan <peng....@nxp.com> --- include/configs/imx8m.h | 8 ++++++++ include/configs/imx8mp_evk.h | 17 +---------------- include/configs/imx8mp_rsb3720.h | 16 +--------------- include/configs/imx8mp_venice.h | 18 +----------------- include/configs/phycore_imx8mp.h | 16 +--------------- include/configs/verdin-imx8mp.h | 16 +--------------- 6 files changed, 13 insertions(+), 78 deletions(-) diff --git a/include/configs/imx8m.h b/include/configs/imx8m.h index 354a9b9fd0d..7894a1c1068 100644 --- a/include/configs/imx8m.h +++ b/include/configs/imx8m.h @@ -34,6 +34,14 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x42200000 #define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K +#elif defined(CONFIG_IMX8MP) +/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ +#define CONFIG_SPL_STACK 0x960000 +#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00 +#define CONFIG_SPL_BSS_MAX_SIZE 0x400 +#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 +#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K + #endif #endif #endif diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 4aac7c81d2e..b54b88a8f67 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -6,27 +6,12 @@ #ifndef __IMX8MP_EVK_H #define __IMX8MP_EVK_H -#include <linux/sizes.h> -#include <linux/stringify.h> -#include <asm/arch/imx-regs.h> +#include <configs/imx8m.h> #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) -#define CONFIG_SPL_MAX_SIZE (152 * 1024) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) - #ifdef CONFIG_SPL_BUILD -/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_STACK 0x960000 -#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00 -#define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ - - #define CONFIG_POWER_PCA9450 - #endif #if defined(CONFIG_CMD_NET) diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index 7dcc2e16c71..b498aa5be2b 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -7,17 +7,11 @@ #ifndef __IMX8MP_RSB3720_H #define __IMX8MP_RSB3720_H -#include <linux/sizes.h> -#include <linux/stringify.h> -#include <asm/arch/imx-regs.h> +#include <configs/imx8m.h> #include <config_distro_bootcmd.h> #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) -#define CONFIG_SPL_MAX_SIZE (152 * 1024) -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) - /* GUIDs for capsule updatable firmware images */ #define IMX8MP_RSB3720A1_4G_FIT_IMAGE_GUID \ EFI_GUID(0xb1251e89, 0x384a, 0x4635, 0xa8, 0x06, \ @@ -28,18 +22,10 @@ 0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9) #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x960000 -#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00 -#define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ - #define CONFIG_MALLOC_F_ADDR 0x184000 /* malloc f used before \ * GD_FLG_FULL_MALLOC_INIT \ * set \ */ - - #if defined(CONFIG_NAND_BOOT) #define CONFIG_SPL_NAND_MXS #endif diff --git a/include/configs/imx8mp_venice.h b/include/configs/imx8mp_venice.h index 17400cffc63..fb37f5d399c 100644 --- a/include/configs/imx8mp_venice.h +++ b/include/configs/imx8mp_venice.h @@ -6,23 +6,7 @@ #ifndef __IMX8MP_VENICE_H #define __IMX8MP_VENICE_H -#include <asm/arch/imx-regs.h> -#include <linux/sizes.h> - -#define CONFIG_SPL_MAX_SIZE (152 * 1024) -#define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_UBOOT_BASE \ - (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x960000 -#define CONFIG_SPL_BSS_START_ADDR 0x0098FC00 -#define CONFIG_SPL_BSS_MAX_SIZE 0x400 /* 1 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ - -/* For RAW image gives a error info not panic */ -#endif +#include <configs/imx8m.h> #define MEM_LAYOUT_ENV_SETTINGS \ "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index 95d70bb92d1..eaa91f66bfd 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -7,26 +7,12 @@ #ifndef __PHYCORE_IMX8MP_H #define __PHYCORE_IMX8MP_H -#include <linux/sizes.h> -#include <asm/arch/imx-regs.h> +#include <configs/imx8m.h> #define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONFIG_SPL_MAX_SIZE (152 * SZ_1K) -#define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_UBOOT_BASE \ - (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) - #ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x960000 -#define CONFIG_SPL_BSS_START_ADDR 0x98FC00 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_1K -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K - - #define CONFIG_POWER_PCA9450 - #endif #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index 09eac5288ce..23bed27e176 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -6,25 +6,11 @@ #ifndef __VERDIN_IMX8MP_H #define __VERDIN_IMX8MP_H -#include <asm/arch/imx-regs.h> -#include <linux/sizes.h> - -#define CONFIG_SPL_MAX_SIZE (152 * 1024) -#define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_UBOOT_BASE \ - (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) +#include <configs/imx8m.h> #ifdef CONFIG_SPL_BUILD -/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ -#define CONFIG_SPL_STACK 0x960000 -#define CONFIG_SPL_BSS_START_ADDR 0x0098fc00 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_1K -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K - /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ #define CONFIG_MALLOC_F_ADDR 0x184000 -/* For RAW image gives a error info not panic */ #define CONFIG_POWER_PCA9450 -- 2.36.0