As of Revision 1.9 the SolidRun i.MX6 SoMs ship with a new PHY - an ADIN1300 at address 1. This patchset carries many small parts to facilitate proper operation of the ethernet port in U-Boot as well as Linux:
1. Fix a compile error in the recently added phy driver 2. Add support for configuring the clock output pins to the phy driver 3. update device-tree with support for the new phy 4. support runtime patching of device-tree for Linux: enable only the phy node detected during boot, to avoid warning messages when Linux probes the phys. 5. finally enable the phy driver in the cuboxi defconfig I have included Nate's patch here only so that it won't get lost - it is fully independent and I have not made any changes. Changes since v1: - applied proper compile fix by Nate Drude - removed -recovered clock options as requested by Linux maintainers Josua Mayer (4): phy: adin: add support for clock output ARM: dts: imx6qdl-sr-som: add support for alternate phy addresses mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS mx6cuboxi: enable driver for adin1300 phy Nate Drude (1): phy: adin: fix broken support for adi,phy-mode-override arch/arm/dts/imx6qdl-sr-som.dtsi | 17 +++++- board/solidrun/mx6cuboxi/mx6cuboxi.c | 78 ++++++++++++++++++++++++++++ configs/mx6cuboxi_defconfig | 2 + drivers/net/phy/adin.c | 64 +++++++++++++++++++---- 4 files changed, 148 insertions(+), 13 deletions(-) -- 2.35.3