On 18.05.22 12:17, Michael Nazzareno Trimarchi wrote:
Hi Fabio and Stefano
do not consider this patch because I found other problems on manage
flash.bin properly in imx8 family. All the other patches
are needed
OK, fine, got it !
Stefano
Michael
On Sun, May 15, 2022 at 11:35 AM Michael Trimarchi
<mich...@amarulasolutions.com> wrote:
romapi is not eble to skip bad block so we need to workaround
using the spl
Signed-off-by: Michael Trimarchi <mich...@amarulasolutions.com>
---
board/bsh/imx8mn_smm_s2/spl.c | 3 +++
1 file changed, 3 insertions(+)
---
V3->V4:
- none
V2->V3:
- Add to series and fix if condition
V1->V2:
- none
---
diff --git a/board/bsh/imx8mn_smm_s2/spl.c b/board/bsh/imx8mn_smm_s2/spl.c
index 0f61acc630..097b60c055 100644
--- a/board/bsh/imx8mn_smm_s2/spl.c
+++ b/board/bsh/imx8mn_smm_s2/spl.c
@@ -18,6 +18,9 @@
int spl_board_boot_device(enum boot_device boot_dev_spl)
{
+ if (IS_ENABLED(CONFIG_NAND_MXS) && get_boot_device() != USB_BOOT)
+ return BOOT_DEVICE_NAND;
+
return BOOT_DEVICE_BOOTROM;
}
--
2.25.1
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
