On 5/18/22 00:16, Zev Weiss wrote:
Previously we'd been using a device name retrieved via ftgmac100_data->phydev, but the mdio read/write functions may be called before that member is initialized in ftgmac100_phy_init(), leading to a NULL pointer dereference while printing the error message issued if the mdio access fails. We can instead use bus->name, which is already available at that point.Signed-off-by: Zev Weiss <z...@bewilderbeest.net> Fixes: 538e75d3fc54 ("net: ftgmac100: add MDIO bus and phylib support")
Reviewed-by: Cédric Le Goater <c...@kaod.org> Thanks, C.
--- drivers/net/ftgmac100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ftgmac100.c b/drivers/net/ftgmac100.c index 78779d7d60b9..74261d14e548 100644 --- a/drivers/net/ftgmac100.c +++ b/drivers/net/ftgmac100.c @@ -119,7 +119,7 @@ static int ftgmac100_mdio_read(struct mii_dev *bus, int phy_addr, int dev_addr, FTGMAC100_MDIO_TIMEOUT_USEC); if (ret) { pr_err("%s: mdio read failed (phy:%d reg:%x)\n", - priv->phydev->dev->name, phy_addr, reg_addr); + bus->name, phy_addr, reg_addr); return ret; }@@ -151,7 +151,7 @@ static int ftgmac100_mdio_write(struct mii_dev *bus, int phy_addr, int dev_addr,FTGMAC100_MDIO_TIMEOUT_USEC); if (ret) { pr_err("%s: mdio write failed (phy:%d reg:%x)\n", - priv->phydev->dev->name, phy_addr, reg_addr); + bus->name, phy_addr, reg_addr); }return ret;
