On Monday 25 April 2022 14:36:14 Pali Rohár wrote: > On Monday 25 April 2022 05:25:34 Priyanka Jain (OSS) wrote: > > >-----Original Message----- > > >From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Pali Rohár > > >Sent: Tuesday, April 5, 2022 7:11 PM > > >To: Priyanka Jain <priyanka.j...@nxp.com>; Qiang Zhao <qiang.z...@nxp.com>; > > >Shengzhou Liu <shengzhou....@nxp.com>; Alexander Graf <ag...@csgraf.de>; > > >Bin Meng <bmeng...@gmail.com>; Wolfgang Denk <w...@denx.de>; Sinan > > >Akman <si...@writeme.com> > > >Cc: u-boot@lists.denx.de > > >Subject: [PATCH 1/2] powerpc: mpc85xx: Add support for generating QorIQ > > >pre- > > >PBL eSDHC boot sector > > > > > >QorIQ U-Boot binary for SD card booting compiled during build process > > >(either u- > > >boot.bin or u-boot-with-spl.bin) cannot be directly loaded by QorIQ pre-PBL > > >BootROM. Compiled U-Boot binary first needs to be processed by Freescale > > >boot_format tool as described in doc/README.mpc85xx-sd-spi-boot > > > > > >BootROM requires that image on SD card must contain special boot sector. > > >Implement support for generating this special boot sector directly in > > >U-Boot start > > >code. Boot sector needs to be at the beginning of the image, so when > > >compiling > > >only proper U-Boot without SPL then it needs to be in proper U-Boot. When > > >compiling SPL with proper U-Boot then it needs to be only in SPL. > > > > > >Support can be enabled by a new config option > > >FSL_PREPBL_ESDHC_BOOT_SECTOR. > > >Via other two additional options FSL_PREPBL_ESDHC_BOOT_SECTOR_START and > > >FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA it is possible to tune how final U-Boot > > >image could be stored on the SD card. > > > > > >Signed-off-by: Pali Rohár <p...@kernel.org> > > >--- > > > > Kindly rebase the series to master. > > > > Regards > > Priyanka > > Hello! Both patches still applies cleanly on master, just they depend > on another patch series (powerpc: mpc85xx: Fix and cleanup mpc85xx code) > which I mentioned in cover letter and therefore needs V2 patch of > "powerpc: mpc85xx: Set TEXT_BASE addresses to real base values" which I > sent recently.
I sent a new version v2 of this patch, see email: [PATCH v2] powerpc: mpc85xx: Add support for generating QorIQ pre-PBL eSDHC boot sector
