On 5/9/22 1:29 AM, Samuel Holland wrote:
This series fixes an issue with out-of-bounds access to the gate array
(patches 1-2), uses the rearranged array size information to remove a
bunch of duplicate code (patches 3-4), and then simplifies how the reset
driver is bound (patches 5-7).
The original motivation for these changes was adding a driver for the
legacy A31/A23/A33 PRCM binding (which I will send separately), and
trying to use OF_PLATDATA in SPL (which did not work out). But I think
at least some of the cleanup is worth applying on its own.
Patch 4 is generally the same change I made between v1 and v2 of the
pinctrl series, using some #ifdefs to share a U_BOOT_DRIVER. It's not
quite as clean as the pinctrl case, because here the SoC-specific parts
are in different files, so all of the CCU descriptors have to be global.
Samuel Holland (7):
clk: sunxi: Store the array sizes in the CCU descriptor
clk: sunxi: Prevent out-of-bounds gate array access
reset: sunxi: Get the reset count from the CCU descriptor
clk: sunxi: Use a single driver for all variants
clk: sunxi: Convert driver private data to platform data
reset: sunxi: Convert driver private data to platform data
reset: sunxi: Reuse the platform data from the clock driver
drivers/clk/sunxi/clk_a10.c | 27 +-----
drivers/clk/sunxi/clk_a10s.c | 27 +-----
drivers/clk/sunxi/clk_a23.c | 27 +-----
drivers/clk/sunxi/clk_a31.c | 25 +----
drivers/clk/sunxi/clk_a31_r.c | 29 +-----
drivers/clk/sunxi/clk_a64.c | 25 +----
drivers/clk/sunxi/clk_a80.c | 36 ++------
drivers/clk/sunxi/clk_a83t.c | 25 +----
drivers/clk/sunxi/clk_h3.c | 27 +-----
drivers/clk/sunxi/clk_h6.c | 25 +----
drivers/clk/sunxi/clk_h616.c | 25 +----
drivers/clk/sunxi/clk_h6_r.c | 27 +-----
drivers/clk/sunxi/clk_r40.c | 25 +----
drivers/clk/sunxi/clk_sunxi.c | 168 ++++++++++++++++++++++++++++++----
drivers/clk/sunxi/clk_v3s.c | 27 +-----
drivers/reset/reset-sunxi.c | 55 ++---------
include/clk/sunxi.h | 21 +----
17 files changed, 208 insertions(+), 413 deletions(-)
For this series:
Acked-by: Sean Anderson <sean...@gmail.com>
