RE: [PATCH] mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' error

[Bough Chen]

+Yangbo

> -----Original Message-----
> From: Peng Fan (OSS) <peng....@oss.nxp.com>
> Sent: 2022年5月9日 13:37
> To: Pali Rohár <p...@kernel.org>; Peng Fan <peng....@nxp.com>; Priyanka Jain
> <priyanka.j...@nxp.com>; Jaehoon Chung <jh80.ch...@samsung.com>; Sinan
> Akman <si...@writeme.com>; Bough Chen <haibo.c...@nxp.com>
> Cc: u-boot@lists.denx.de
> Subject: Re: [PATCH] mmc: fsl_esdhc: Fix 'Internal clock never stabilised.' 
> error
> 
> +Haibo
> 
> On 2022/4/30 2:27, Pali Rohár wrote:
> > Only newer eSDHC controllers set PRSSTAT_SDSTB flag. So do not wait
> > until flag PRSSTAT_SDSTB is set on old pre-2.2 controllers. Instead
> > sleep for fixed amount of time like it was before commit 6f883e501b65
> ("mmc:
> > fsl_esdhc: Add emmc hs200 support").
> >
> > This change fixes error 'Internal clock never stabilised.' which is
> > printed on P2020 board at every access to SD card.
> >
> > Fixes: 6f883e501b65 ("mmc: fsl_esdhc: Add emmc hs200 support")
> > Signed-off-by: Pali Rohár <p...@kernel.org>
> > ---
> >   drivers/mmc/fsl_esdhc.c | 17 +++++++++++++++++
> >   1 file changed, 17 insertions(+)
> >
> > diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index
> > fdf2cc290e06..3b3587bd8d72 100644
> > --- a/drivers/mmc/fsl_esdhc.c
> > +++ b/drivers/mmc/fsl_esdhc.c
> > @@ -503,6 +503,7 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, 
> > struct
> mmc *mmc, uint clock)
> >     u32 time_out;
> >     u32 value;
> >     uint clk;
> > +   u32 hostver;
> >
> >     if (clock < mmc->cfg->f_min)
> >             clock = mmc->cfg->f_min;
> > @@ -543,6 +544,14 @@ static void set_sysctl(struct fsl_esdhc_priv
> > *priv, struct mmc *mmc, uint clock)
> >
> >     esdhc_clrsetbits32(&regs->sysctl, SYSCTL_CLOCK_MASK, clk);
> >
> > +   /* Only newer eSDHC controllers set PRSSTAT_SDSTB flag */
> > +   hostver = esdhc_read32(&priv->esdhc_regs->hostver);
> > +   if (HOSTVER_VENDOR(hostver) <= VENDOR_V_22) {
> > +           udelay(10000);
> > +           esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | SYSCTL_CKEN);
> > +           return;
> > +   }
> > +
> >     time_out = 20;
> >     value = PRSSTAT_SDSTB;
> >     while (!(esdhc_read32(&regs->prsstat) & value)) { @@ -562,6 +571,7
> > @@ static void esdhc_clock_control(struct fsl_esdhc_priv *priv, bool enable)
> >     struct fsl_esdhc *regs = priv->esdhc_regs;
> >     u32 value;
> >     u32 time_out;
> > +   u32 hostver;
> >
> >     value = esdhc_read32(&regs->sysctl);
> >
> > @@ -572,6 +582,13 @@ static void esdhc_clock_control(struct
> > fsl_esdhc_priv *priv, bool enable)
> >
> >     esdhc_write32(&regs->sysctl, value);
> >
> > +   /* Only newer eSDHC controllers set PRSSTAT_SDSTB flag */
> > +   hostver = esdhc_read32(&priv->esdhc_regs->hostver);
> > +   if (HOSTVER_VENDOR(hostver) <= VENDOR_V_22) {
> > +           udelay(10000);
> > +           return;
> > +   }
> > +
> >     time_out = 20;
> >     value = PRSSTAT_SDSTB;
> >     while (!(esdhc_read32(&regs->prsstat) & value)) {
> >