mws4 is an arm based nuclear probe hardware used from german government
to monitor nuclear activity
Signed-off-by: Marian Ulbricht <ulbri...@innoroute.de>
---
arch/arm/dts/Makefile | 3 +
arch/arm/dts/omap3-mws4-u-boot.dtsi | 14 ++
arch/arm/dts/omap3-mws4.dts | 137 ++++++++++++++
arch/arm/mach-omap2/omap3/Kconfig | 10 +
board/ultratronik/mws4/Kconfig | 12 ++
board/ultratronik/mws4/MAINTAINERS | 6 +
board/ultratronik/mws4/Makefile | 6 +
board/ultratronik/mws4/default.env | 11 ++
board/ultratronik/mws4/mws4.c | 283 ++++++++++++++++++++++++++++
board/ultratronik/mws4/mws4.h | 203 ++++++++++++++++++++
configs/omap3_mws4_defconfig | 74 ++++++++
include/configs/omap3_mws4.h | 103 ++++++++++
12 files changed, 862 insertions(+)
create mode 100644 arch/arm/dts/omap3-mws4-u-boot.dtsi
create mode 100644 arch/arm/dts/omap3-mws4.dts
create mode 100644 board/ultratronik/mws4/Kconfig
create mode 100644 board/ultratronik/mws4/MAINTAINERS
create mode 100644 board/ultratronik/mws4/Makefile
create mode 100644 board/ultratronik/mws4/default.env
create mode 100644 board/ultratronik/mws4/mws4.c
create mode 100644 board/ultratronik/mws4/mws4.h
create mode 100644 configs/omap3_mws4_defconfig
create mode 100644 include/configs/omap3_mws4.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 83630af4f6..7b68a49990 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1047,6 +1047,9 @@ dtb-$(CONFIG_TARGET_OMAP3_BEAGLE) += \
omap3-beagle-xm.dtb \
omap3-beagle.dtb
+dtb-$(CONFIG_TARGET_OMAP3_MWS4) += \
+ omap3-mws4.dtb
+
dtb-$(CONFIG_TARGET_OMAP3_IGEP00X0) += \
omap3-igep0020.dtb
diff --git a/arch/arm/dts/omap3-mws4-u-boot.dtsi
b/arch/arm/dts/omap3-mws4-u-boot.dtsi
new file mode 100644
index 0000000000..2c03701c89
--- /dev/null
+++ b/arch/arm/dts/omap3-mws4-u-boot.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * U-Boot additions
+ *
+ * (C) Copyright 2017 Derald D. Woods <woods.techni...@gmail.com>
+ */
+
+#include "omap3-u-boot.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart3;
+ };
+};
diff --git a/arch/arm/dts/omap3-mws4.dts b/arch/arm/dts/omap3-mws4.dts
new file mode 100644
index 0000000000..f8a5c3d5b8
--- /dev/null
+++ b/arch/arm/dts/omap3-mws4.dts
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Modified 2015 by Bernhard Gätzschmann, Ultratronik from Beagleboard xM
+ *
+ * Modified 2022 Marian Ulbricht ulbri...@innoroute.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+ model = "Ultratronik BFS MWS4";
+ compatible = "ti,omap3-mmi4", "ti,omap3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ hwconfig {
+ i_enable_mmc = <1>;
+ i_enable_musb = <1>;
+ i_musb_mode = <1>;/*0-undefined, 1-HOST, 2-PERIPHERAL, 3-OTG*/
+ i_musb_power=<500>;
+ i_enable_ehci = <0>;
+ i_usb_reset_gpio = <20>; /* DUMMY Entry */
+ i_enable_eth = <1>;
+ i_eth_irq_gpio = <130>;
+ i_eth_fifo_gpio = <0>;
+ i_eth_cs = <4>;
+ i_gpio_leds_0 = "led0:red", "none", "false", "102", "0";
+ i_gpio_leds_1 = "led1:yellow", "none", "false", "103", "0";
+ i_gpio_leds_2 = "led2:green", "none", "false", "104", "0";
+ i_gpio_leds_3 = "led3:orange", "none", "false", "101", "0";
+ i_gpio_leds_4 = "usb:enable", "none", "false", "110", "1";
+ i_gpio_leds_5 = "usbhub:reset", "none", "false", "27", "0";
+ i_gpio_leds_6 = "iic:reset", "none", "false", "163", "0";
+ i_gpio_leds_7 = "rs232:reset", "none", "false", "26", "0";
+ i_i2c_bus_hw_2 = "2", "100";
+ i_i2c_device_0 = "rtc8564", "0x51", "2";
+ i_i2c_bus_hw_3 = "3", "100";
+ i_enable_flash = <1>;
+ i_enable_audio = <0>;
+ i_enable_video = <0>;
+ i_enable_can = <0>;
+ };
+
+ ue_pinctrl {
+/* GPIO: HW ID */
+ pin_94 = "cam_hs.gpio_94", "IEN", "PTU", "DIS"; /* GPIO_94 */
+ pin_95 = "cam_vs.gpio_95", "IEN", "PTU", "DIS"; /* GPIO_95 */
+ pin_96 = "cam_xclka.gpio_96", "IEN", "PTU", "DIS"; /* GPIO_96 */
+
+/* GPIO: Digital Out */
+ pin_156 = "mcbsp1_clkr.gpio_156", "IEN", "PTU", "DIS"; /*
GPIO_156 */
+ pin_157 = "mcbsp1_fsr.gpio_157", "IEN", "PTU", "DIS"; /*
GPIO_157 */
+ pin_158 = "mcbsp1_dx.gpio_158", "IEN", "PTU", "DIS"; /*
GPIO_158 */
+ pin_159 = "mcbsp1_dr.gpio_159", "IEN", "PTU", "DIS"; /*
GPIO_159 */
+ pin_160 = "mcbsp_clks.gpio_160", "IEN", "PTU", "DIS"; /*
GPIO_160 */
+ pin_161 = "mcbsp1_fsx.gpio_161", "IEN", "PTU", "DIS"; /*
GPIO_161 */
+ pin_162 = "mcbsp1_clkx.gpio_162", "IEN", "PTU", "DIS";
/*GPIO_162 */
+
+/* GPIO: Digital In */
+ pin_99 = "cam_d0.gpio_99", "IEN", "PTU", "DIS"; /* D_IN1_I */
+ pin_100 = "cam_d1.gpio_100", "IEN", "PTU", "DIS"; /* D_IN2_I */
+ pin_106 = "cam_d7.gpio_106", "IEN", "PTD", "DIS"; /* D_IN3_I */
+ pin_107 = "cam_d8.gpio_107", "IEN", "PTD", "DIS"; /* D_IN4_I */
+ pin_108 = "cam_d9.gpio_108", "IEN", "PTD", "DIS"; /* D_IN5_I */
+
+/* GPIO: Watchdog Trigger */
+ pin_117 = "mcbsp2_clkx.gpio_117", "IDIS", "PTD", "DIS"; /*
WD_TRIGGER */
+
+/* GPIO: TestAdapter */
+ pin_171 = "mcspi1_clk.gpio_171", "IEN", "PTU", "DIS"; /* TP200
*/
+ pin_172 = "mcspi1_simo.gpio_172", "IEN", "PTU", "DIS"; /* TP201
*/
+ pin_173 = "mcspi1_somi.gpio_173", "IEN", "PTU", "DIS"; /* TP202
*/
+ pin_174 = "mcspi1_cs0.gpio_174", "IEN", "PTU", "DIS"; /* TP203
*/
+ pin_177 = "mcspi1_cs3.gpio_177", "IEN", "PTU", "DIS"; /* TP204
*/
+ pin_178 = "mcspi2_clk.gpio_178", "IEN", "PTU", "DIS"; /* TP205
*/
+ pin_179 = "mcspi2_simo.gpio_179", "IEN", "PTU", "DIS"; /* TP206
*/
+ pin_180 = "mcspi2_somi.gpio_180", "IEN", "PTU", "DIS"; /* TP207
*/
+ pin_1 = "sys_clkreq.gpio_1", "IEN", "PTU", "DIS"; /* TP240 */
+
+
+/* USB0 */
+ pin_120 = "hsusb0_clk.hsusb0_clk", "IEN", "PTD", "DIS"; /* USB0
CLK */
+ pin_121 = "hsusb0_stp.hsusb0_stp", "IDIS", "PTU", "EN"; /* USB0
STP */
+ pin_122 = "hsusb0_dir.hsusb0_dir", "IEN", "PTD", "DIS"; /* USB0
DIR */
+ pin_124 = "hsusb0_nxt.hsusb0_nxt", "IEN", "PTD", "DIS"; /* USB0
NXT */
+ pin_125 = "hsusb0_data0.hsusb0_data0", "IEN", "PTD", "DIS"; /*
USB0 D0 */
+ pin_0130 = "hsusb0_data1.hsusb0_data1", "IEN", "PTD", "DIS"; /* USB0
D1 */
+ pin_0131 = "hsusb0_data2.hsusb0_data2", "IEN", "PTD", "DIS"; /* USB0
D2 */
+ pin_169 = "hsusb0_data3.hsusb0_data3", "IEN", "PTD", "DIS"; /*
USB0 D3 */
+ pin_188 = "hsusb0_data4.hsusb0_data4", "IEN", "PTD", "DIS"; /*
USB0 D4 */
+ pin_189 = "hsusb0_data5.hsusb0_data5", "IEN", "PTD", "DIS"; /*
USB0 D5 */
+ pin_190 = "hsusb0_data6.hsusb0_data6", "IEN", "PTD", "DIS"; /*
USB0 D6 */
+ pin_191 = "hsusb0_data7.hsusb0_data7", "IEN", "PTD", "DIS"; /*
USB0 D7 */
+ pin_110 = "cam_d11.gpio_110", "IEN", "PTD", "DIS"; /*
#USB_OTG_RESET */
+ pin_27 = "etk_d13.gpio_27", "IEN", "PTD", "DIS"; /*
#USB_HUB_RESET */
+
+/* SERIELL */
+ pin_148 = "uart1_tx.uart1_tx", "IDIS", "PTD", "DIS"; /* TXD1 */
+ pin_151 = "uart1_rx.uart1_rx", "IEN", "PTU", "EN"; /* RXD1 */
+ pin_149 = "uart1_rts.uart1_rts", "IDIS", "PTD", "DIS"; /* #RTS1
*/
+
+/* ETHERNET */
+ pin_55 = "gpmc_ncs4.gpmc_ncs4", "IEN", "PTU", "EN"; /*
#GPMC_CS4 ETH */
+ pin_130 = "sdmmc2_clk.gpio_130", "IEN", "PTD", "DIS"; /*
#ETH_IRQ */
+/* SD CARD */
+ pin_126 = "sdmmc1_dat4.gpio_126", "IEN", "PTD", "DIS"; /*
SD_WP */
+ pin_59 = "gpmc_clk.gpio_59", "IEN", "PTD", "DIS"; /* #SD_CD */
+/* I2C #2 */
+ pin_168 = "i2c2_scl.i2c2_scl", "IEN", "PTU", "EN"; /* SCL2 */
+ pin_183 = "i2c2_sda.i2c2_sda", "IEN", "PTU", "EN"; /* SDA2 */
+
+/* I2C #3 */
+ pin_184 = "i2c3_scl.i2c3_scl", "IEN", "PTU", "EN"; /* SCL3 */
+ pin_185 = "i2c3_sda.i2c3_sda", "IEN", "PTU", "EN"; /* SDA3 */
+
+
+/* DIVERSES */
+ pin_101 = "cam_d2.gpio_101", "IDIS", "PTD", "DIS"; /*
(Orange) LED */
+ pin_102 = "cam_d3.gpio_102", "IDIS", "PTD", "DIS"; /* (Red)
LED1 */
+ pin_103 = "cam_d4.gpio_103", "IDIS", "PTD", "DIS"; /* (Yellow)
LED2 */
+ pin_104 = "cam_d5.gpio_104", "IDIS", "PTD", "DIS"; /* (Green)
LED3 */
+ pin_105 = "cam_d6.gpio_105", "IEN", "PTD", "DIS"; /* Push
Button*/
+ pin_163 = "uart3_cts_rctx.gpio_163", "IEN", "PTD", "DIS"; /*
II2 Reset */
+ pin_26 = "etk_d12.gpio_26", "IEN", "PTD", "DIS"; /* RS232 Reset
*/
+ };
+
+};
+
diff --git a/arch/arm/mach-omap2/omap3/Kconfig
b/arch/arm/mach-omap2/omap3/Kconfig
index 81c898b66e..23e971b5ba 100644
--- a/arch/arm/mach-omap2/omap3/Kconfig
+++ b/arch/arm/mach-omap2/omap3/Kconfig
@@ -43,6 +43,15 @@ config TARGET_OMAP3_BEAGLE
select OMAP3_GPIO_6
imply CMD_DM
+config TARGET_OMAP3_MWS4
+ bool "Ultratrokik OMAP3 MWS4"
+ select DM
+ select DM_GPIO
+ select DM_SERIAL
+ select OMAP3_GPIO_5
+ select OMAP3_GPIO_6
+ imply CMD_DM
+
config TARGET_CM_T35
bool "CompuLab CM-T3530 and CM-T3730 boards"
select OMAP3_GPIO_2
@@ -162,5 +171,6 @@ source "board/isee/igep00x0/Kconfig"
source "board/logicpd/omap3som/Kconfig"
source "board/nokia/rx51/Kconfig"
source "board/lg/sniper/Kconfig"
+source "board/ultratronik/mws4/Kconfig"
endif
diff --git a/board/ultratronik/mws4/Kconfig b/board/ultratronik/mws4/Kconfig
new file mode 100644
index 0000000000..95d4c9e460
--- /dev/null
+++ b/board/ultratronik/mws4/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_OMAP3_MWS4
+
+config SYS_BOARD
+ default "mws4"
+
+config SYS_VENDOR
+ default "ultratronik"
+
+config SYS_CONFIG_NAME
+ default "omap3_mws4"
+
+endif
diff --git a/board/ultratronik/mws4/MAINTAINERS
b/board/ultratronik/mws4/MAINTAINERS
new file mode 100644
index 0000000000..fc9022c594
--- /dev/null
+++ b/board/ultratronik/mws4/MAINTAINERS
@@ -0,0 +1,6 @@
+MWS4 BfS
+M: M. Ulbricht <ulbri...@innoroute.de>
+S: Maintained
+F: board/ultratronik/mws4/
+F: include/configs/omap3_mws4.h
+F: configs/omap3_mws4_defconfig
diff --git a/board/ultratronik/mws4/Makefile
b/board/ultratronik/mws4/Makefile
new file mode 100644
index 0000000000..507a365aeb
--- /dev/null
+++ b/board/ultratronik/mws4/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
+
+obj-y := mws4.o
diff --git a/board/ultratronik/mws4/default.env
b/board/ultratronik/mws4/default.env
new file mode 100644
index 0000000000..b610a9622d
--- /dev/null
+++ b/board/ultratronik/mws4/default.env
@@ -0,0 +1,11 @@
+arch=arm
+baudrate=115200
+board=mws4
+board_name=mws4
+bootargs=console=ttyS2,115200 earlyprintk root=/dev/mmcblk0p2
rootfstype=ext4 rw rootwait
+boot_sd=fatload mmc 0 0x80000000 uImage; fatload mmc 0 0x89000000
omap3-mws4.dtb; bootm 0x80000000 - 0x89000000
+boot_nand=nand read.e 0x80000000 0x140000 0xA00000;nand read.e
0x89000000 0x120000 0x20000;bootm 0x80000000 - 0x89000000
+bootmode_nand=setenv bootcmd run boot_nand;setenv bootargs
'console=ttyS2,115200 ubi.mtd=5 root=ubi0:rootfs rootfstype=ubifs rw
rootwait';saveenv
+bootmode_sd=setenv bootcmd run boot_sd; setenv bootargs
'console=ttyS2,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4
rw rootwait';saveenv
+flash_kernel=fatload mmc 0 0x80000000 uImage;nand erase 0x140000
0xA00000;nand write.e 0x80000000 0x140000 0xA00000;fatload mmc 0
0x89000000 omap3-mws4.dtb;nand erase 0x120000 0x20000;nand write.e
0x89000000 0x120000 0x20000
+bootcmd=run boot_sd
diff --git a/board/ultratronik/mws4/mws4.c b/board/ultratronik/mws4/mws4.c
new file mode 100644
index 0000000000..7ab5e2745b
--- /dev/null
+++ b/board/ultratronik/mws4/mws4.c
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2004-2011
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Sunil Kumar <sunilsain...@gmail.com>
+ * Shashi Ranjan <shashiranjanmc...@gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ * Richard Woodruff <r-woodru...@ti.com>
+ * Syed Mohammed Khasim <kha...@ti.com>
+ *
+ */
+// mod for BfS ulbri...@innoroute.de 2021
+#include <common.h>
+#include <bootstage.h>
+#include <dm.h>
+#include <env.h>
+#include <init.h>
+#include <net.h>
+#include <ns16550.h>
+#include <serial.h>
+#include <twl4030.h>
+#include <linux/mtd/rawnand.h>
+#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/omap_musb.h>
+#include <linux/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+#include "mws4.h"
+#include <command.h>
+#include <usb.h>
+#include <asm/ehci-omap.h>
+
+#define TWL4030_I2C_BUS 0
+#define EXPANSION_EEPROM_I2C_BUS 1
+#define EXPANSION_EEPROM_I2C_ADDRESS 0x50
+
+#define TINCANTOOLS_ZIPPY 0x01000100
+#define TINCANTOOLS_ZIPPY2 0x02000100
+#define TINCANTOOLS_TRAINER 0x04000100
+#define TINCANTOOLS_SHOWDOG 0x03000100
+#define KBADC_BEAGLEFPGA 0x01000600
+#define LW_BEAGLETOUCH 0x01000700
+#define BRAINMUX_LCDOG 0x01000800
+#define BRAINMUX_LCDOGTOUCH 0x02000800
+#define BBTOYS_WIFI 0x01000B00
+#define BBTOYS_VGA 0x02000B00
+#define BBTOYS_LCD 0x03000B00
+#define BCT_BRETTL3 0x01000F00
+#define BCT_BRETTL4 0x02000F00
+#define LSR_COM6L_ADPT 0x01001300
+#define BEAGLE_NO_EEPROM 0xffffffff
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct {
+ unsigned int device_vendor;
+ unsigned char revision;
+ unsigned char content;
+ char fab_revision[8];
+ char env_var[16];
+ char env_setting[64];
+} expansion_config;
+
+
+#if !defined(CONFIG_SPL_BUILD)
+/* Call usb_stop() before starting the kernel */
+//void show_boot_progress(int val)
+//{
+// if (val == BOOTSTAGE_ID_RUN_OS)
+// usb_stop();
+//}
+
+static struct omap_usbhs_board_data usbhs_bdata = {
+ .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY
+};
+
+int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor
**hcor)
+{
+ return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+}
+
+int ehci_hcd_stop(int index)
+{
+ return omap_ehci_hcd_stop();
+}
+#endif
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+ /* board id for Linux */
+ gd->bd->bi_arch_number = 5109;
+ /* boot param addr */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+printf("Support InnoRoute.de\n");
+// init power
+ twl4030_power_init();
+// unprotect Power registers
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+ TWL4030_PM_MASTER_PROTECT_KEY, 0xC0);
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+ TWL4030_PM_MASTER_PROTECT_KEY, 0x0C);
+// enable HF 19,5MhZ CLK (need for VBUS!)
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+ TWL4030_PM_MASTER_CFG_BOOT, 0x19);
+// protect power registers
+ twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
+ TWL4030_PM_MASTER_PROTECT_KEY, 0x00);
+ return 0;
+}
+
+#if defined(CONFIG_SPL_OS_BOOT)
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ if (serial_tstc() && serial_getc() == 'c')
+ return 1;
+
+ return 0;
+}
+#endif /* CONFIG_SPL_OS_BOOT */
+
+/*
+ * Routine: get_board_revision
+ * Description: Detect if we are running on a Beagle revision Ax/Bx,
+ * C1/2/3, C4, xM Ax/Bx or xM Cx. This can be done by reading
+ * the level of GPIO173, GPIO172 and GPIO171. This should
+ * result in
+ * GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx
+ * GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3
+ * GPIO173, GPIO172, GPIO171: 1 0 1 => C4
+ * GPIO173, GPIO172, GPIO171: 0 1 0 => xM Cx
+ * GPIO173, GPIO172, GPIO171: 0 0 0 => xM Ax/Bx
+ */
+static int get_board_revision(void)
+{
+ static int revision = 7;
+
+/* if (revision == -1) {*/
+/* if (!gpio_request(171, "rev0") &&*/
+/* !gpio_request(172, "rev1") &&*/
+/* !gpio_request(173, "rev2")) {*/
+/* gpio_direction_input(171);*/
+/* gpio_direction_input(172);*/
+/* gpio_direction_input(173);*/
+
+/* revision = gpio_get_value(173) << 2 |*/
+/* gpio_get_value(172) << 1 |*/
+/* gpio_get_value(171);*/
+/* } else {*/
+/* printf("Error: unable to acquire board revision
GPIOs\n");*/
+/* }*/
+/* }*/
+
+ return revision;
+}
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on the first bank. This
+ * provides the timing values back to the function that configures
+ * the memory.
+ */
+void get_board_mem_timings(struct board_sdrc_timings *timings)
+{
+ int pop_mfr, pop_id;
+
+ /* 256MB DDR */
+ timings->mcfg = HYNIX_V_MCFG_200(256 << 20);
+ timings->ctrla = HYNIX_V_ACTIMA_200;
+ timings->ctrlb = HYNIX_V_ACTIMB_200;
+ timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+ timings->mr = MICRON_V_MR_165;
+}
+#endif
+
+
+
+
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts
+ */
+int misc_init_r(void)
+{
+ struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
+ struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
+ struct control_prog_io *prog_io_base = (struct control_prog_io
*)OMAP34XX_CTRL_BASE;
+ bool generate_fake_mac = false;
+ u32 value;
+
+ /* Enable i2c2 pullup resisters */
+ value = readl(&prog_io_base->io1);
+ value &= ~(PRG_I2C2_PULLUPRESX);
+ writel(value, &prog_io_base->io1);
+env_set("beaglerev", "AxBx");
+
+
+
+env_set("buddy", "none");
+
+
+
+ /* Set GPIO states before they are made outputs */
+/* writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,*/
+/* &gpio6_base->setdataout);*/
+/* writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |*/
+/* GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);*/
+
+/* //Configure GPIOs to output */
+/* writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);*/
+/* writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |*/
+/* GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);*/
+
+ omap_die_id_display();
+/* Set VAUX2 to 1.8V for EHCI PHY */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
+ TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
+ TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
+
+ //dieid_num_r();
+/*#ifdef CONFIG_VIDEO_OMAP3*/
+/* beagle_dvi_pup();*/
+/* beagle_display_init();*/
+/* omap3_dss_enable();*/
+/*#endif*/
+
+/* if (generate_fake_mac)*/
+/* omap_die_id_usbethaddr();*/
+
+/*#if defined(CONFIG_MTDIDS_DEFAULT) && defined(CONFIG_MTDPARTS_DEFAULT)*/
+/* if (strlen(CONFIG_MTDIDS_DEFAULT))*/
+/* env_set("mtdids", CONFIG_MTDIDS_DEFAULT);*/
+
+/* if (strlen(CONFIG_MTDPARTS_DEFAULT))*/
+/* env_set("mtdparts", CONFIG_MTDPARTS_DEFAULT);*/
+/*#endif*/
+
+ return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ * hardware. Many pins need to be moved from protect to primary
+ * mode.
+ */
+void set_muxconf_regs(void)
+{
+ MUX_MWS4();
+}
+
+#if defined(CONFIG_MMC)
+int board_mmc_init(struct bd_info *bis)
+{
+ return omap_mmc_init(0, 0, 0, -1, -1);
+}
+#endif
+
+#if defined(CONFIG_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
diff --git a/board/ultratronik/mws4/mws4.h b/board/ultratronik/mws4/mws4.h
new file mode 100644
index 0000000000..9655d19be3
--- /dev/null
+++ b/board/ultratronik/mws4/mws4.h
@@ -0,0 +1,203 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2008
+ * Dirk Behme <dirk.be...@gmail.com>
+ */
+// mod for BfS ulbri...@innoroute.de 2021
+#ifndef _BEAGLE_H_
+#define _BEAGLE_H_
+
+#include <asm/arch/dss.h>
+
+const omap3_sysinfo sysinfo = {
+ DDR_STACKED,
+ "BfS MWS4",
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
+ "OneNAND",
+#else
+ "NAND",
+#endif
+};
+
+/* BeagleBoard revisions */
+#define REVISION_AXBX 0x7
+#define REVISION_CX 0x6
+#define REVISION_C4 0x5
+#define REVISION_XM_AB 0x0
+#define REVISION_XM_C 0x2
+
+/*
+ * IEN - Input Enable
+ * IDIS - Input Disable
+ * PTD - Pull type Down
+ * PTU - Pull type Up
+ * DIS - Pull type selection is inactive
+ * EN - Pull type selection is active
+ * M0 - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_MWS4() \
+ /*SDRC*/\
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\
+ /*GPMC*/\
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
+ MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\
+ MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\
+ MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\
+ MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\
+ MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\
+ MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\
+ MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\
+ MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\
+ MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\
+ MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\
+ MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\
+ MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\
+ MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\
+ MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\
+ MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\
+ MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\
+ MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\
+ MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\
+ MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\
+ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\
+ MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1))
/*SYS_nDMA_REQ2*/\
+ MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1))
/*SYS_nDMA_REQ3*/\
+ MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\
+ MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\
+ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)) /*GPMC_CLK*/\
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0))
/*GPMC_nADV_ALE*/\
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0))
/*GPMC_nBE0_CLE*/\
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
+ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\
+ /*CAMERA*/\
+ MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M4)) /*CAM_HS HW0*/\
+ MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M4)) /*CAM_VS HW1*/\
+ MUX_VAL(CP(CAM_XCLKA), (IEN | PTU | EN | M4)) /*CAM_XCLKA
HW2*/\
+ MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M4)) /*CAM_D0
DIN1*/\
+ MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M4)) /*CAM_D1
DIN2*/\
+ MUX_VAL(CP(CAM_D2), (IDIS | PTD | DIS | M4)) /*CAM_D2,
led_sm*/\
+ MUX_VAL(CP(CAM_D3), (IDIS | PTD | DIS | M4)) /*CAM_D3,
led1*/\
+ MUX_VAL(CP(CAM_D4), (IDIS | PTD | DIS | M4)) /*CAM_D4,
led2*/\
+ MUX_VAL(CP(CAM_D5), (IDIS | PTD | DIS | M4)) /*CAM_D5,
led3*/\
+ MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M4)) /*CAM_D6
sw_sm*/\
+ MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M4)) /*CAM_D7
DIN3*/\
+ MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M4)) /*CAM_D8
DIN4*/\
+ MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M4)) /*CAM_D9
DIN5*/\
+ MUX_VAL(CP(CAM_D11), (IDIS | PTD | DIS | M4))
/*CAM_D11,usb2en*/\
+ /*Audio Interface */\
+ MUX_VAL(CP(MCBSP2_CLKX), (IDIS | PTD | DIS | M4)) /*McBSP2_CLKX
wd_trigger*/\
+ /*Expansion card */\
+ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\
+ /*Wireless LAN */\
+ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | DIS | M4)) /*GPIO_130
eth_irq*/\
+ /*Modem Interface */\
+ MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
+ MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*GPIO_149*/ \
+ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\
+ MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M0))
/*SSI1_DAT_RX*/\
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) /*GPIO_156*/\
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | DIS | M4)) /*GPIO_157
GPO1*/\
+ MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158
GPO2*/\
+ MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159
GPO3*/\
+ MUX_VAL(CP(MCBSP_CLKS), (IDIS | PTD | DIS | M4)) /*McBSP_CLKS
GPO4*/\
+ MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161
GPO5*/\
+ MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162
GPO6*/\
+ /*Serial Interface*/\
+/* MUX_VAL(CP(UART3_CTS_RCTX), (IDIS | PTD | DIS | M4))
*//*UART3_CTS_RCTX IIC_RES_18*/\
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0))
/*UART3_RX_IRRX*/\
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0))
/*UART3_TX_IRTX*/\
+ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\
+ MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\
+ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\
+ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\
+ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA0*/\
+ MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA1*/\
+ MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA2*/\
+ MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA3*/\
+ MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA4*/\
+ MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA5*/\
+ MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA6*/\
+ MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0))
/*HSUSB0_DATA7*/\
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | DIS | M0)) /*I2C1_SCL*/\
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | DIS | M0)) /*I2C1_SDA*/\
+ MUX_VAL(CP(I2C2_SCL), (IEN | PTU | DIS | M0)) /*I2C2_SCL*/\
+ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | DIS | M0)) /*I2C2_SDA*/\
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | DIS | M0)) /*I2C3_SCL*/\
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | DIS | M0)) /*I2C3_SDA*/\
+ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | DIS | M0)) /*I2C4_SCL*/\
+ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | DIS | M0)) /*I2C4_SDA*/\
+ /*Control and debug */\
+ MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M0)) /*GPIO_2*/\
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M0)) /*GPIO_3*/\
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M0)) /*GPIO_4*/\
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M0)) /*GPIO_5*/\
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M0)) /*GPIO_6*/\
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M0)) /*GPIO_7*/\
+ MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M0)) /*GPIO_8*/ \
+ MUX_VAL(CP(SYS_OFF_MODE), (IDIS | PTD | DIS | M0))
/*SYS_OFF_MODE*/\
+ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/
+
+
+#endif
+
+
+
diff --git a/configs/omap3_mws4_defconfig b/configs/omap3_mws4_defconfig
new file mode 100644
index 0000000000..af0bdd1823
--- /dev/null
+++ b/configs/omap3_mws4_defconfig
@@ -0,0 +1,74 @@
+CONFIG_SYS_NAND_PAGE_SIZE=2048
+CONFIG_SYS_NAND_OOBSIZE=64
+CONFIG_ARM=y
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_TARGET_OMAP3_MWS4=y
+CONFIG_DEFAULT_DEVICE_TREE="omap3-mws4"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NAND_BOOT=y
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=3
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_STOP_STR="q"
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_USE_PREBOOT=y
+CONFIG_DEFAULT_FDT_FILE="omap3-mws4.dtb"
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SYS_PROMPT="MWS4 # "
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FS_UUID=y
+CONFIG_CMD_UBI=y
+# CONFIG_ISO_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_USE_DEFAULT_ENV_FILE=y
+CONFIG_DEFAULT_ENV_FILE="board/ultratronik/mws4/default.env"
+CONFIG_VERSION_VARIABLE=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82000000
+CONFIG_DM_MMC=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_CMD_PINMUX=y
+CONFIG_DM_I2C=y
+CONFIG_PINCTRL=y
+CONFIG_MTD=y
+CONFIG_SYS_NAND_USE_FLASH_BBT=y
+# CONFIG_NAND_OMAP_GPMC_PREFETCH is not set
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_DM_ETH=y
+CONFIG_SPI=y
+CONFIG_PHY=y
+CONFIG_USB_MUSB_TI=y
+CONFIG_DM_SPI=y
+CONFIG_OMAP3_SPI=y
+CONFIG_USB=y
+CONFIG_USB_MUSB_TI=y
+CONFIG_DM_USB=y
+CONFIG_OMAP_USB_PHY=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OMAP3=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_GADGET=n
+CONFIG_USB_MUSB_OMAP2PLUS=y
+CONFIG_TWL4030_USB=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_VIDEO_OMAP3=y
+CONFIG_BCH=y
+CONFIG_SPL_OF_LIBFDT=y
diff --git a/include/configs/omap3_mws4.h b/include/configs/omap3_mws4.h
new file mode 100644
index 0000000000..862e910aab
--- /dev/null
+++ b/include/configs/omap3_mws4.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2006-2008
+ * Texas Instruments.
+ * Richard Woodruff <r-woodru...@ti.com>
+ * Syed Mohammed Khasim <x0kha...@ti.com>
+ *
+ * Configuration settings for the TI OMAP3530 Beagle board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/ti_omap3_common.h>
+
+/*
+ * We are only ever GP parts and will utilize all of the "downloaded image"
+ * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
+ */
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_CONS_INDEX 3
+
+/* NAND */
+#if defined(CONFIG_MTD_RAW_NAND)
+#define CONFIG_SYS_FLASH_BASE NAND_BASE
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
+ 10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
+//#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+#define CONFIG_SYS_ENV_SECT_SIZE SZ_128K
+/* NAND: SPL falcon mode configs */
+#if defined(CONFIG_SPL_OS_BOOT)
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
+#endif /* CONFIG_SPL_OS_BOOT */
+#endif /* CONFIG_MTD_RAW_NAND */
+
+/* USB EHCI */
+//#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147
+
+/* Enable Multi Bus support for I2C */
+#define CONFIG_I2C_MULTI_BUS
+
+/* DSS Support */
+
+/* TWL4030 LED Support */
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+ DEFAULT_LINUX_BOOT_ENV
+
+#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel #instance "=" \
+ "setenv mmcdev " #instance "; " \
+ "run mmcboot\0"
+#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
+ #devtypel #instance " "
+
+#if defined(CONFIG_MTD_RAW_NAND)
+
+#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel #instance "=" \
+ "if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \
+ "echo NAND boot disabled: No mtdids and/or mtdparts; " \
+ "else " \
+ "run nandboot; " \
+ "fi\0"
+#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
+ #devtypel #instance " "
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(LEGACY_MMC, legacy_mmc, 0) \
+ func(UBIFS, ubifs, 0) \
+ func(NAND, nand, 0)
+
+#else /* !CONFIG_MTD_RAW_NAND */
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(LEGACY_MMC, legacy_mmc, 0)
+
+#endif /* CONFIG_MTD_RAW_NAND */
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ MEM_LAYOUT_ENV_SETTINGS \
+ "console=ttyO2,115200n8\0" \
+ BOOTENV
+#endif /* __CONFIG_H */
--
2.25.1
