As of Revision 1.9 the SolidRun i.MX6 SoMs ship with a new PHY - an ADIN1300 at address 1. This patchset carries many small parts to facilitate proper operation of the ethernet port in U-Boot as well as Linux:
1. Fix a compile error in the recently phy driver 2. Add support for configuring the clock output pins to the phy driver 3. update device-tree with support for the neew phy 4. support runtime patching of device-tree for Linux: enables only the phy node detected during boot, to avoid warning messages during boot. 5. finally enable the phy driver in the cuboxi defconfig Josua Mayer (5): phy: adin: remove broken support for adi,phy-mode-override phy: adin: add support for clock output ARM: dts: imx6qdl-sr-som: add support for alternate phy addresses mx6cuboxi: fixup dtb ethernet phy nodes before booting an OS mx6cuboxi: enable driver for adin1300 phy arch/arm/dts/imx6qdl-sr-som.dtsi | 17 +++++- board/solidrun/mx6cuboxi/mx6cuboxi.c | 78 +++++++++++++++++++++++++++ configs/mx6cuboxi_defconfig | 2 + drivers/net/phy/adin.c | 80 ++++++++++++++++------------ 4 files changed, 141 insertions(+), 36 deletions(-) -- 2.34.1
