On 29.04.22 15:10, Peng Fan (OSS) wrote:
From: Peng Fan <peng....@nxp.com>
Since these boards has CONFIG_DM_SERIAL and/or CONFIG_SPL_DM_SERIAL,
the legacy macro no need to be defined.
Signed-off-by: Peng Fan <peng....@nxp.com>
---
include/configs/aristainetos2.h | 2 --
include/configs/imx8mm_evk.h | 1 -
include/configs/imx8mn_evk.h | 1 -
include/configs/imx8mp_evk.h | 1 -
include/configs/mx7dsabresd.h | 1 -
include/configs/somlabs_visionsom_6ull.h | 1 -
include/configs/tbs2910.h | 1 -
include/configs/verdin-imx8mm.h | 1 -
include/configs/verdin-imx8mp.h | 1 -
9 files changed, 10 deletions(-)
diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h
index 8ee97f1d4e3..27adae5d6bf 100644
--- a/include/configs/aristainetos2.h
+++ b/include/configs/aristainetos2.h
@@ -14,10 +14,8 @@
#define CONFIG_HOSTNAME "aristainetos2"
#if (CONFIG_SYS_BOARD_VERSION == 5)
-#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONSOLE_DEV "ttymxc1"
#elif (CONFIG_SYS_BOARD_VERSION == 6)
-#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONSOLE_DEV "ttymxc0"
#endif
diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h
index 42b78485cfc..7dd66527c3d 100644
--- a/include/configs/imx8mm_evk.h
+++ b/include/configs/imx8mm_evk.h
@@ -68,7 +68,6 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 2048
diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h
index 034132225c6..b20e0a5553d 100644
--- a/include/configs/imx8mn_evk.h
+++ b/include/configs/imx8mn_evk.h
@@ -75,7 +75,6 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 2048
diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
index cc8d65cb54e..cbdd490a300 100644
--- a/include/configs/imx8mp_evk.h
+++ b/include/configs/imx8mp_evk.h
@@ -80,7 +80,6 @@
#define PHYS_SDRAM_2 0x100000000
#define PHYS_SDRAM_2_SIZE 0xC0000000 /* 3 GB */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 2048
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index aaad232f0e4..62e62c6701f 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -12,7 +12,6 @@
#define PHYS_SDRAM_SIZE SZ_1G
-#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
#ifdef CONFIG_IMX_BOOTAUX
/* Set to QSPI1 A flash at default */
diff --git a/include/configs/somlabs_visionsom_6ull.h
b/include/configs/somlabs_visionsom_6ull.h
index d4761296c75..e6aad386efe 100644
--- a/include/configs/somlabs_visionsom_6ull.h
+++ b/include/configs/somlabs_visionsom_6ull.h
@@ -16,7 +16,6 @@
/* SPL options */
#include "imx6_spl.h"
-#define CONFIG_MXC_UART_BASE UART1_BASE
/* MMC Configs */
#ifdef CONFIG_FSL_USDHC
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index b7a94812f35..7af182524a6 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -25,7 +25,6 @@
#define CONFIG_SYS_BOOTMAPSZ 0x10000000
/* Serial console */
Since the whole section becomes empty, please also remove this comment
and the empty line.
Thanks for the cleanup,
Soeren
-#define CONFIG_MXC_UART_BASE UART1_BASE /* select UART1/UART2 */
/* Framebuffer */
#define CONFIG_IMX_HDMI
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index da3dc95f9ee..3d7f5a3380e 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -84,7 +84,6 @@
#define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */
/* UART */
-#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE SZ_2K
diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
index 7b7407752c1..b166e750c27 100644
--- a/include/configs/verdin-imx8mp.h
+++ b/include/configs/verdin-imx8mp.h
@@ -101,7 +101,6 @@
#define PHYS_SDRAM_2_SIZE (SZ_4G + SZ_1G)
/* UART */
-#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE SZ_2K
