Dear Wolfgang Denk,
> Well, the point is that your referenc ist not the ARM tree, but you
> pulled inbetween and thus have stuff in your tree that is not present
> in u-boot-arm # master yet - so when I pull from your repo, I will get
> all this stuff as well.
Umm, thats true. I pulled from u-boot.git/master to my master.
I will repull/rebase that to u-boot-arm. Did not think about that.
Previously I was just lucky that u-boot-arm was identical to u-boot :)
Solves one mystery.
>
>> For Andreas' patches, it seems that Signed-off-by: lines with non-ASCII
>> characters in the name do cause
>> trouble and git-am choses to use the e-mail address instead.
>
> I don't think that this is a problem with git-am.
>
> When I use git-am to apply one of Andreas' patches, I will get a
> warning but only for the body of the commit message (for the SoB line,
> to be precise):
>
> ...
> Applying: at91rm9200ek: add configure target for RAM boot
> Warning: commit message does not conform to UTF-8.
> You may want to amend it after fixing the message, or set the config
> variable i18n.commitencoding to the encoding your project uses.
>
> But except from that it works fine, and it shows
>
> Author: Andreas Bießmann <andreas.de...@googlemail.com> 2010-11-30 20:45:03
> Committer: Wolfgang Denk <w...@denx.de> 2010-12-07 15:28:06
>
>
> I get identical results when downloading the mbox file from patchwork
> or when using the file in my local mailing list archive.
What I get when I do that (after save to disk the mbox files):
reinh...@sieb:~/embedded/u-boot-atmel$ git-am ../u-boot-patches/*.patch
Applying at91rm9200ek: fix SDRAM initialistation values
Applying at91rm9200ek: add configure target for RAM boot
Applying MAKEALL: fix AT91
Applying arm920t/at91/reset: board_reset: define weak symbol
Applying arm920t/at91/timer: replace bss variables by gd
reinh...@sieb:~/embedded/u-boot-atmel$ gitk
reinh...@sieb:~/embedded/u-boot-atmel$ git-request-pull master
git://git.denx.de/u-boot-atmel.git to2010.12 >pull.txt
reinh...@sieb:~/embedded/u-boot-atmel$ cat pull.txt
The following changes since commit 52eb2c79110151b9017a0829c4d44ee7b8e2ca04:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-samsung
are available in the git repository at:
git://git.denx.de/u-boot-atmel.git for2010.12
Andreas Bießmann (1):
arm920t/at91/reset: board_reset: define weak symbol
Reinhard Meyer (3):
AT91: gen_atmel_mci.c: fix bug when Slot B is used
AT91: fix EMAC gpio init in at91sam9260_devices.c
AT91: add TOP9000 support
andreas.de...@googlemail.com (4):
at91rm9200ek: fix SDRAM initialistation values
at91rm9200ek: add configure target for RAM boot
MAKEALL: fix AT91
arm920t/at91/timer: replace bss variables by gd
MAINTAINERS | 3 +-
MAKEALL | 18 +-
arch/arm/cpu/arm920t/at91/reset.c | 8 +-
arch/arm/cpu/arm920t/at91/timer.c | 29 +-
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 5 +
arch/arm/include/asm/global_data.h | 1 +
board/atmel/at91rm9200ek/config.mk | 2 -
board/emk/top9000/Makefile | 54 ++++
board/emk/top9000/spi.c | 61 ++++
board/emk/top9000/top9000.c | 290 +++++++++++++++++++
boards.cfg | 5 +-
drivers/mmc/gen_atmel_mci.c | 1 +
include/configs/at91rm9200ek.h | 18 ++-
include/configs/top9000.h | 314 +++++++++++++++++++++
14 files changed, 771 insertions(+), 38 deletions(-)
delete mode 100644 board/atmel/at91rm9200ek/config.mk
create mode 100644 board/emk/top9000/Makefile
create mode 100644 board/emk/top9000/spi.c
create mode 100644 board/emk/top9000/top9000.c
create mode 100644 include/configs/top9000.h
reinh...@sieb:~/embedded/u-boot-atmel$
The ones he sent via the googlemail.com account still look funny for the Author
part.
But does that really matter. The commit itself, including the Signed-off-by
line os fine.
Best Regards,
Reinhard
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
